milling machining centers - horizontal

Control Dialog 4 ︱Table length 1000 mm︱Table width 500 mm︱Spindle taper ISO 40 ︱

---

x-travel 1250 mm︱y-travel 500 mm︱z-travel 500 mm︱table-size 1800x320 mm︱total power requirement kW︱weight of the machine ca. 5 t︱dimensions of the machine ca. m︱

---

horizontal for platt milling

x-travel 560 mm︱y-travel 560 mm︱z-travel 625 mm︱control OSP 300 MA ︱main spindle: ︱turning speed range - main spindle 50 - 15000 min/-1︱drive capacity - main spindle 26 / 18,5 kW︱tool taper BT 40 BigPlus ︱tool magazin: ︱number of tool places 64 Pos.︱tool taper BT 40 BigPlus ︱table: ︱no. of tables 2 ︱rotary table diameter 400 x 400 mm︱workpiece weight 400 kg︱rotating range 0,001 °︱max. workpiece height 600 x 900 mm︱feeds: ︱speed max xyz 60 m/min︱total power requirement 45 kva︱

---

- CNC control OSP 300 MA - Pallet changer with 2 pallets - tool changer 64-fold (BT 40 BigPlus) - Cooling by spindle/tools 15bar - Renishaw laser - chip conveyor - Spindle cooler - TAS-C temperature compensation - Renishaw TS 34 - Renishaw OMP 60 - Transformer - Servo NAVI M option - CE only 1-shift run, power-on hours: 3025h, spindle running time: 660h

x-travel 2000 mm︱y-travel 1200 mm︱z-travel 1300 mm︱c-axis 360° 0︱control Heidenhain iTNC 530 HSCI ︱total power requirement 70 kVA kW︱weight of the machine ca. 27 t︱dimensions of the machine ca. 3 x 5 x 3,4 m︱

---

travel -x axis 730 mm︱travel -y axis 730 mm︱travel -z axis 740 mm︱number of spindle speeds 18.000 U/min︱control Mazatrol MATRIX Nexus ︱numbers of positions in the tool changer 40 ︱

---

4-axis horizontal machining center | MAZAK - HCN 5000-II equipped with ITC (15 bar), chip conveyor & tool changer. Special equipment: - NC rotary table (4th axis / 0.001° x 360,000 positions) - Tool length measurement and broken tool detection - automatic tool length measurement - absolute positioning system The machine is in very good condition and can be inspected at any time under power. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: HCN5000-II | HCN 5000 II | HCN5000II

travel -x axis 730 mm︱travel -y axis 730 mm︱travel -z axis 740 mm︱number of spindle speeds 18.000 U/min︱control Mazatrol MATRIX Nexus ︱numbers of positions in the tool changer 40 ︱

---

4-axis horizontal machining center | MAZAK - HCN 5000-II equipped with ITC (15 bar), chip conveyor & tool changer. Special equipment: - NC positioning table (0.001°) - Tool length measurement and broken tool detection - automatic tool length measurement The machine is in very good condition and can be inspected at any time under power. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: HCN5000-II | HCN 5000 II | HCN5000II

number of spindle speeds 18.000 U/min︱control Mazatrol MATRIX Nexus ︱numbers of positions in the tool changer 40 ︱

---

4-axis horizontal machining center | MAZAK - HCN 4000-II equipped with ITC (15 bar), chip conveyor & tool changer. Special equipment: - NC rotary table (360,000 positions) - Tool length measurement and broken tool detection - automatic tool length measurement The machine is in very good condition and can be inspected at any time under power. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: HCN4000-II | HCN 4000 II | HCN4000II

x-travel 560 mm︱y-travel 600 mm︱z-travel 600 mm︱pressure 9,7 t︱no. of strokes Hub/min︱sheet width mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

x-travel 700 mm︱y-travel 800 mm︱z-travel 800 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

x-travel 500 mm︱y-travel 400/720 mm︱z-travel 520 mm︱b-axis 360 °︱V-axis - mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

x-travel 800 mm︱y-travel 800 mm︱z-travel 1050 mm︱Control SIEMENS 840 D ︱size of pallet 630 x 630 mm︱tool taper HSK 63 A ︱spindle turning speed range 24000 U/min︱main drive motor 35/25 (40/100% ED) kW︱total power requirement kW︱weight of the machine ca. 29,4 t︱dimensions of the machine ca. m︱

---

x-travel 560 mm︱y-travel 560 mm︱z-travel 510 mm︱turning speeds 18000 U/min︱ ︱tool taper ISO 40 ︱Control ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

x-travel 700 mm︱y-travel 800 mm︱z-travel 800 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

CNC control Sinumerik 840D powerline NC-rotary table B-axis automatic tool changer for 45 tools pallet changing device, 2 pallets 500 mm x 500mm coolant through spindle device IKZ chip conveyor coolant device Technische Daten / technical details: X-Weg / X-travel 700 mm Y-Weg / Y-travel 800 mm Z-Weg / Z-travel 800 mm B-Achse / B-axis 360x0,001 ° Spindelaufnahme / spindle taper HSK A63 Drehzahlbereich Spindel / spindle speed 10000 Upm /rpm Vorschub / infeed 60000 mm/min Eilgang / rapid feed 60 m/min Antriebsleistung 40/100% ED / drive capacity 40/100% ED 30/20 kW Gewicht der Maschine ca. / weight ca. 12000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

capacity X-axis 1.100 mm︱capacity Y-axis 900 mm︱capacity Z-axis 1.250 mm︱control Siemens 840 D ︱number of spindle speeds 8.000 U/min︱tool taper SK 50 ︱tools in tool magazin 192 ︱workpiece weight 1.5 t︱pallet table size 630 x 800 mm︱power capacity 37 kW︱

---

Horizontal machining center | BURKHARDT & WEBER - MCX 750 Special equipment: - Pallet change with 2 pallets - KNOLL coolant system - Coolant through the spindle (30 l/min at 50 bar, programmable) - Tool changer with double gripper - electronic 3D probe The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MCX750 | MCX-750

x-travel 1300 mm︱y-travel 1100 mm︱z-travel 1000 mm︱Control PC Fusion 640 M ︱size of pallet 800 x 800 mm︱ Ø1250 x 1250 mm︱turning speed range 35 - 10000 U/min︱transmission ratio 4 ︱feed range 1 - 40 m/min︱rapid travel x/y/z 40 m/min︱table load 2,2 t︱swivelling range 0,001° x 360000 Grad︱table height over floor 1350 mm︱Distance spindle nose - palett surface 150 - 1150 mm︱Distance spindle centre - table surface 100 - 1200 mm︱tool taper CAT 50 ︱max. torque on the spindle 525 Nm︱power capacity - milling spindle 30 / 22 kW︱chain magazin for tools 80 ︱diameter of tools max. 135 mm︱

---

-Standard accessories - 2-fold pallet changer - Safety cover for 2-fold pallet changer - Tool length measuring device - Complete coolant system: Flood cooling, spindle cooling, Niagara cooling/rinsing system - Spindle cooling unit - Blow-out device (main spindle holder) - Coolant and chip protection through fully enclosed work area - CNC control Mazatrol PC FUSION CNC 640M dialogue programming - MAZAK Monitoring System C - Tool life monitoring and spare tool call-up (TLM) - Navigation monitoring display - Machining navigation - PCMCIA interface - Automatic partition door opening/closing - Work area door locking - Removable handwheel for three axes - Workspace lighting - 1 set of instructions Including the following optional accessories: - Tool magazine for 80 tools (chain magazine version) - Factory preparation for high-pressure cooling through the spindle 15 bar - NC rotary table (fourth axis 0.001° x 360.000 pos.) - Circular boring cycle, spiral boring of fits - 7 pallets ( 5 x groove, 2 x thread) - Air blast device on the workpiece to remove chips and to cooling of the workpiece by compressed air, actuated by M-command or manually. -Renishaw probe MP 10 - Chip conveyor lateral ejection - Tool breakage monitoring - CNC option package Performance Contents of the package: - Common variables (600 pairs) - MAZAK Tapping Tornado (EIA/ISO) - Synchronous tapping - EIA/ISO input function - EIA/ISO special function Spiral interpolation (G02.1, G03,1), correction of the 3D tool (G40-G42) Scaling (G50, G51) a.o. - EIA/ISO, constant feed (G93) When using this function, the feed rate remains constant for straight lines and curve combinations on the contour remains constant. - EIA/ISO tool length measurement (G37) - EIA/ISO, program unit stop function The programme sequence is automatically stopped at the preset programme unit. - MAZACC-2D (Mazatrol & EIA/ISO) Precision control function, for precise vector interpolation and optimum acceleration and deceleration at edges and radii. This enables improved two-dimensional shape accuracy. - Additional workpiece coordinate system (G54.1 P1 - 48) 48 pairs - Spiral machining function (G33) for boring head machining (e.g. with d'Andrea tool) all dimensions, weights and performance data without obligation - Second-hand machine without warranty - subject to prior sale

x-travel 650 mm︱y-travel 650 mm︱z-travel 650 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

x-travel 1600 mm︱y-travel 1250 mm︱z-travel 1000 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

x-travel 3400 mm︱y-travel 1350 mm︱z-travel 760 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

x-travel 600 mm︱y-travel 560 mm︱z-travel 560 mm︱b-axis 360 °︱tool taper SK 40 ︱numbers of positions in the tool changer 180 ︱total power requirement 60 kW︱weight of the machine ca. 11,5 t︱dimensions of the machine ca. m︱

---

machining center, used, Manufacturer: Deckel Maho, year of manufacture: 1999, Type: DMC 60H hi-dyn, with B-axis, Control: Sinumerik 840 D

CNC brand Siemens ︱CNC model Sinumerik 840 D ︱Table length 800 mm︱Table width 630 mm︱Number of pallets 2 ︱X 1000 mm︱Y 800 mm︱Z 1050 mm︱Spindle taper ISO 50 ︱Rapid traverse 28000 mm/min︱Tool changer 60 ︱Maximum speed 4000 RPM︱Max. workpiece diameter 1400 mm ø︱Maximum palletload 2500 kg︱Power 31 kW︱Machine dimensions 6500 x 5500 x 3700 mm︱Machine weight 20000 kg︱

---

The machine is delivered excluding the tools on the photo

x-travel 720 mm︱y-travel 630 mm︱z-travel 630 mm︱Control OKUMA OSP 7000 ︱size of pallet 500 x 500 mm︱spindle tunring speed 10 - 5000 U/min︱tool taper MAS BT 50 ︱

---

In our opinion, the machine is in very good condition and can be inspected under power by appointment. Accessories and technical characteristics: - 10x pallet station - 200 tool places - Tool breakage button - Renishaw probe - High pressure coolant system - Coolant mist - Extraction system - Spindle load and torque monitoring - Thread milling - chip conveyor ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***

x-travel 1050 mm︱y-travel 800 mm︱z-travel 825 mm︱total power requirement kW︱weight of the machine ca. 21,9 t︱dimensions of the machine ca. m︱

---

x-travel 2000 mm︱y-travel 1600 mm︱z-travel 1600 mm︱total power requirement 110 kW︱weight of the machine ca. 45 t︱dimensions of the machine ca. m︱

---

x-travel 650 mm︱y-travel 500 mm︱z-travel 650 mm︱Control Siemens 840 D ︱total power requirement kW︱weight of the machine ca. 12,5 t︱dimensions of the machine ca. m︱

---