Band Saw - Automatic - Horizontal

cutting diameter rund 250 mm︱cutting diameter vierkant 230 mm︱cutting diameter flach 280 x 200 mm︱dimensions of saw-band 2950 x 27 x 0,9 mm︱sawing stroke 290 mm︱weight of the machine ca. 610 kg︱

---

cutting diameter 320 mm︱saw band length 3660 mm︱cutting width 350 mm︱feed in one step 600 mm︱cutting speed 20-100 m/min︱dimensions of saw-band 4160 x 27 x 0,9 mm︱work height max. 740 mm︱capacity 45 degrees: round 320 mm︱capacity 90 degrees: flat 610 x 320 mm︱hydraulic motor 1,5 kW︱feed motor 0,12 kW︱sawing motor 1,5 kW︱total power requirement 4 kW︱weight of the machine ca. 1,96 t︱dimensions of the machine ca. 2,4 x 2,4 x 1,4 m︱

---

cutting diameter 560 mm︱saw band length 6000 x 41 x 1,3 mm︱cutting width 570 mm︱ 560 x 560 mm︱Capacity 90° rectangular 570 x 560 mm︱speeds steplessly adjustable 20 - 100 m/min︱total power requirement 6,0 kW︱weight of the machine ca. 2,24 t︱dimensions of the machine ca. 3,5 x 1,05 x 2,05 m︱

---

Fully automatic band saw for cutting solid material, tubes and profiles of steel, cast-iron, light and non ferrous materials, at 90°. Entirely made of steel. The rear jaw of the hydraulic vice has a number of hardened rollers that are turned by an electric motor. The front jaw consist of a number of free running rollers. Once the work piece is clamped between the rollers no further clamping is needed. The material is fed through the vice to the material stop which contains a micro-switch controlling the feed motor. A counter controls the number of cuts. Should the blade brake the machines stop automatically. The machines are fitted with an integrated coolant pump with a removable coolant tank, which supplies coolant to both guide assemblies.

cutting diameter 350 mm︱saw band length 4160 mm︱cutting width 400 mm︱ 350 mm︱ 350 x 350 mm︱Capacity 90° rectangular 400 x 350 mm︱speed 20 -100 m/min︱main drive 2,2 kW︱hydraulic pump 0,37 kW︱coolant pump 0,12 kW︱dimensions of saw-band 4160 x 34 x 1,1 mm︱work height max. 860 mm︱total power requirement 2,9 kW︱weight of the machine ca. 1030 kg︱dimensions of the machine ca. 2,23 x 0,88 x 1,89 m︱

---

Description: • Fully automatic miter band saw for sawing thick-walled Profiles and solid materials • Motorized roll feed of the material with electrical contact stop • Delta touch screen controls • Miter cutting, up to 45 ° • 1 program with 10 steps • Length accuracy 0.5 mm The feed length of the material is manually adjustable via an Microswitches selected that • Robustly constructed monoblock saw frame with hydraulic vertical movement and linear guide • Rapid advance of the saw frame with automatic transition to saw feed (Light sensor) • Infinitely variable belt speed 20 - 100 m / min • sensitive cutting pressure regulation depending on the material properties • hydraulic-mechanical belt tension • automatic guide arm adjustment, synchronized with hydraulic clamping of the Horizontal vice • Belt guidance over hard metal plates and rollers • thermal overload protection and undervoltage release • Automatic switch-off after the end of the cut • Automatic machine shutdown in the event of a belt break • Chip brush driven by an impeller

cutting diameter 330 mm︱saw band length 4160 x 34 x 1,1 mm︱cutting width 500 mm︱ 320 mm︱Capacity 90° rectangular 500 x 320 mm︱speeds steplessly adjustable 20 - 100 m/min︱table height 640 mm︱total power requirement 3,0 kW︱weight of the machine ca. 860 kg︱dimensions of the machine ca. 2,10 x 0,85 x 1,30 m︱

---

On semi-automatic models the saw arm is lifted up automatically after the sawing cycle has finished. inverter hydraulic clamping hydraulic saw blade tension adjustment automatic stop ?material transport system

cutting diameter 320 mm︱saw band length 3660 x 27 x 0,9 mm︱cutting width 300 mm︱ 300 x 300 mm︱Capacity 90° rectangular 320 x 300 mm︱speeds steplessly adjustable 20 - 100 m/min︱work height max. 640 mm︱total power requirement 2,9 kW︱weight of the machine ca. 765 kg︱dimensions of the machine ca. 1,9 x 0,85 x 1,3 m︱

---

after the sawing cycle has finished.

cutting diameter 320 mm︱saw band length 3660 x 27 x 0,9 mm︱cutting width 350 mm︱Capacity 90° rectangular 350 x 320 mm︱ 320 mm︱ 260 mm︱ 180 mm︱ 250 x 180 mm︱ 160 mm︱ 150 x 150 mm︱speeds steplessly adjustable 20 - 100 m/min︱ 180 x 180 mm︱work height max. 740 mm︱Control ︱total power requirement 3,42 kW︱weight of the machine ca. 2,31 t︱dimensions of the machine ca. 2100 x 2100 x 1810 m︱

---

On semi-automatic models the saw arm is lifted up automatically after the sawing cycle has finished. inverter hydraulic clamping hydraulic saw blade tension adjustment automatic stop ?material transport system

cutting diameter 380 mm︱saw band length 4800 x 34 x 1,1 mm︱cutting width 430 mm︱ 380 mm︱Capacity 90° rectangular 430 x 380 mm︱speeds steplessly adjustable 20 - 100 m/min︱total power requirement 4,2 kW︱weight of the machine ca. 1,34 t︱dimensions of the machine ca. 2,9 x 0,95 x 1,66 m︱

---

Fully automatic band saw for cutting solid material, tubes and profiles of steel, cast-iron, light and non ferrous materials, at 90°. Entirely made of steel. The rear jaw of the hydraulic vice has a number of hardened rollers that are turned by an electric motor. The front jaw consist of a number of free running rollers. Once the work piece is clamped between the rollers no further clamping is needed. The material is fed through the vice to the material stop which contains a micro-switch controlling the feed motor. A counter controls the number of cuts. Should the blade brake the machines stop automatically. The machines are fitted with an integrated coolant pump with a removable coolant tank, which supplies coolant to both guide assemblies.

cutting diameter 460 mm︱saw band length 5200 x 41 x 1,3 mm︱cutting width 470 mm︱ 460 mm︱Capacity 90° rectangular 470 x 460 mm︱cutting speed 20 - 100 m/min︱total power requirement 5,2 kW︱weight of the machine ca. 1,66 t︱dimensions of the machine ca. 3,1 x 3,1 x 1,8 m︱

---

Fully automatic band saw for cutting solid material, tubes and profiles of steel, cast-iron, light and non ferrous materials, at 90°. Entirely made of steel. The rear jaw of the hydraulic vice has a number of hardened rollers that are turned by an electric motor. The front jaw consist of a number of free running rollers. Once the work piece is clamped between the rollers no further clamping is needed. The material is fed through the vice to the material stop which contains a micro-switch controlling the feed motor. A counter controls the number of cuts. Should the blade brake the machines stop automatically. The machines are fitted with an integrated coolant pump with a removable coolant tank, which supplies coolant to both guide assemblies.

cutting diameter 230 mm︱saw band length 2730 x 27 x 0,9 mm︱cutting width 240 mm︱ 230 x 230 mm︱capacity 90 degrees: flat 240 x 230 mm︱speeds steplessly adjustable 35 - 70 m/min︱table height 590 mm︱total power requirement 2,0 kW︱weight of the machine ca. 590 kg︱dimensions of the machine ca. 1,7 x 0,8 x 1,16 ︱

---

The HU 230 DG is a popular sawing machine and is heavily sold, due to its favourable price-quality relation. With adjustable sawing pressure, coolant pump with reservoir and electrical-mechanical saw blade tension adjustment, this machine is ideal for large workshops and small production lines. separate control panel sawing pressure hydraulically adjustable with cooling system easily moveable with stop gear wheel driven left – right mitre sawing

cutting diameter 280 mm︱saw band length 3120 mm︱tong feed 600 mm︱work height max. 835 mm︱dimensions of saw-band 3120 x 27 x 0,9 mm︱ 280 mm︱Capacity 90° rectangular 330 x 240 mm︱ 240 x 240 mm︱ 225 mm︱ 215 x 215 mm︱ 230 x 140 mm︱capacity 60 degrees: round 140 mm︱capacity 60 degrees: square 140 x 130 mm︱capacity 60 degrees: flat 140 x 130 mm︱band speed 20 - 100 m/min︱total power requirement 1,5 kW︱weight of the machine ca. 700 kg︱dimensions of the machine ca. 2,6 x 1,75 x 1,7 m︱

---

Fully automatic metal band saw with high cutting accuracy. At this Machine are 90 ° cuts, as well as miter cuts on one side up to 45 °, continuously possible. In the manual workflow up to 30 ° (swivel range 60 °). Workflow: After entering the required number of pieces and the cut length on the control panelthe fully automatic work cycle is started. Basic equipment: - CNC control, storage of up to 99 sawing programs - hydraulic control of the cast iron saw arm - Frequency-controlled saw band drive continuously adjustable from 20 to 100 m / min - manual miter adjustment - single feed 600 mm - Height limitation of the saw frame - easy setting of the saw for miter cuts by turning the saw frame - Hydraulic clamping of the workpiece via short-stroke cylinders - Cutting pressure regulation (solid material - pipe) - electrical band tension monitoring with saw band break control - Carbide saw band guides and guide rollers - Stable underframe with coolant tray - Coolant pump with double feed to the saw band guides - Material drainage grid - Bi - metal saw band M 42 - moving chip brush

cutting diameter 300 mm︱saw band length 3270 x 27 x 0,9 mm︱cutting width 420 mm︱feed per cut 800 mm︱band speed 35-70 m/min︱quick change toolholder 300 ︱capacity 90 degrees: square 240 x 240 mm︱Capacity 90° rectangular 420 x 200 mm︱ 240 mm︱ 230 mm︱Capacity 45° rectangular 270 x 140 mm︱capacity 60 degrees: round 165 mm︱capacity 60 degrees: square 170 mm︱capacity 60 degrees: flat 170 x 170 mm︱total power requirement 0,9-1,5 kW︱weight of the machine ca. 1090 kg︱dimensions of the machine ca. 2800 2050 x 1900 mm︱

---

neu ︱ 2023 ︱ 6240 ︱ prompt, Zwischenverkauf v ︱ Italien ︱ 18970 €︱ 392.68 €︱ 1 ︱ 3010x27x0,9 mm︱ 20-100 m/min︱ 260 mm︱ 240 mm︱ 330x120 mm︱ rund 200 mm, quadrat 190 ︱ rund 120 mm, quadrat 115 ︱ 220 mm︱ 835 mm︱ 1,5 kW︱ 2800 mm︱ 2050 mm︱

---

material feed andnumber of pieces by CNC (99 programms) automatic cutting cycle clamping, saw blade and cutting fluid on, cutting operation, saw blade and cutting fluid off, fast return stroke, declamp automatic feed 600 mm/stroke variable cutting pressure variable cutting speed coolant equipment automatic saw blade breakage detection hydraulic vices for material clamping while cutting and for feeder unit user manual in GERMAN or ENGLISH

neu ︱ 2023 ︱ 6244 ︱ prompt, Zwischenverkauf v ︱ Italien ︱ 13923 €︱ 288.21 €︱ 1 ︱ 3270x27x0,9 mm︱ 40/80 m/min︱ 300 mm︱ 300 mm︱ 350x260 mm︱ rund 210 mm, quadrat 210 ︱ rund 110 mm, quadrat 110 ︱ 830 mm︱ 1,5 kW︱ 1500 mm︱ 1600 mm︱ 1900 mm︱

---

hydraulicvice INCL. ADJUSTABLE CLAMPING PRESSURE saw beam moves up and down by hydraulic cylinder fast descent automatic fast up/down conrolled by feeler pin adjustable pressure according to section and type of material double safety buton for cycle start 2 speeds coolant equipment _CUTTING CYCLE_ Vice locking; Quick bow pull-down hydraulically operated; Blade rotation and cooling liquid start-up; Working pull-down; end of the cutting cycle; Stop of blade rotation and supply of cooling liquid; Quick bow lift-up; Stop of bow upwards movement; vice unlocking if selected.

neu ︱ 2023 ︱ 6245 ︱ prompt, Zwischenverkauf v ︱ Italien ︱ 14030 €︱ 1 ︱ 3370x27x0,9 mm mm︱ 37 / 74 m/min︱ 305 mm︱ 250 mm︱ 350x200 mm mm︱ rund 250 mm, quadrat 230 ︱ rund 250 mm, quadrat 230 ︱ rund 175 mm, quadrat 155 ︱ 940 mm︱ 1,5/1,8 kW︱ 1750 mm︱ 1480 mm︱ 1900 mm︱

---

2 speeds 37 / 74 m/min hydraulic vice with adjustable guides steel sawframe adjustable blade tension suitable for cutting steel and cast iron position sensor automatically detects start-cut point adjustable bar stop blade-cleaning brush removable chip collector coolant tank

capacity 90 degrees: round 230 mm︱capacity 90 degrees: square 230 x 230 mm︱saw band length 2950 x 27 x 0,9 mm︱table height 880 mm︱band speed 15 - 100 m/min︱opening of clamping jaw max. 235 mm︱total power requirement 3,8 kW︱weight of the machine ca. 1,2 t︱dimensions 1,9 x 1,7 x 1,9 m︱

---

Used SHARK 230-1 NC HS 5.0 with microdosing and 4500 mm roller conveyor. As good as new condition Automatic two-column bandsaw with only 2.5 square meters footprint, highestperformance in the smallest space. Electro-hydraulic two-column bandsaw fully automatic with semi-automatic function for cuts from 0° of mild steel, stainless steel, steel alloys, solid and profiled material, with max. 85 mm rest piece length. MAXIMUM EFFICIENCY The 2 operating modes (semi-automatic and automatic) allow efficient cutting in all conditions. The control system allows to store up to 100 cutting programs, each with different quantities and lengths, minimizing the programming time for frequently executed jobs. The feed of the saw head through linear guides driven by hydraulic cylinders with preloaded recirculating ball bearings ensures the reduction of mechanical vibrations during cutting and higher stability. The automatic alignment of the front saw blade guide head depending on the dimensions of the bars to be cut reduces the processing time. EXTREMELY FLEXIBLE The feed system with 600 mm stroke is repeatable and cuts all lengths. The vertical pair of rollers allows to hold and align any type of bar or bundle that is fed. The OPTIONAL automatic retraction of the fixed jaw of the feed vice allows feeding even non-straight bars. Vector inverter for infinitely variable blade speed adjustment from 15 to 100m/ min allows cutting of any material. FEATURES: User interface with touch screen display of 7" and mechanical buttons for the operating functions of the sawing machine , guarantees reliable operation, simple and intuitive, and a control in real time of all cutting parameters. Safety enclosure according to the latest safety regulations of the EN 13898/ 2007 machinery directive. New fieldbus communication system with double microprocessor with serial connection. Robust cast iron structure (G25) to compensate vibrations, improve machine stability and protect the saw band. Centralized control panel for easy and convenient operation and control of machine functions. Electronic inverter for continuous regulation of the band speed from 15 to 100 m/min. Positioning of the saw head and movement of the feeder by means of joystick. Automatic detection of the cutting start position. Feeding of the saw blade on linear guides with preloaded sliding rails with ball circulation and hydraulic cylinder control. Automatic monitoring of the cutting load by a servo valve mounted directly on the cylinder. Manual belt tension control with display on the screen by means of electronic converter. Hydraulic control unit with built-in vise pressure reduction for lowering/ raising the saw bow and opening/closing the vices. Material feed of 500 mm (in single stroke) with stepper motor and ball screw mounted on opposite ball bearings. Movable feeder vice to feed even slightly curved material. Automatic retraction of the rear jaw from the feeder vice to facilitate the feeding of highly bent material. (OPTIONAL) The saw band drive wheel is fixed by a conical clamping set, which allows an optimal axial adjustment. Adjustable saw band guide heads made of steel with carbide guides,control valves for conventional circulation lubrication and preparation for the installation of the OPTIONAL minimum quantity lubrication system. Automatic adjustment of the front saw band guide head in relation to the dimension of the material. Vertical pair of rollers so that the material is always perfectly aligned. Adjustable guide for unloading the cut piece. Rotation control of the belt with immediate stop of running in real time in case of tilted tool. The coolant tray is built into the base. The chip drawer can be replaced by a motorized chip conveyor with screw conveyor (OPTIONAL). Powered chip clearing brush. Signal light and alarm sound in case of machine emergency or program end. The machine is designed for crane (with suspension lugs) and for lift truck transport. Bimetal saw band for solid and profiled material. Tools and instruction manual with spare parts list.

neu ︱ 2022 ︱ 6236 ︱ prompt, Zwischenverkauf v ︱ Türkei ︱ 9730 €︱ 184.87 €︱ 1 ︱ 3160x27x0,9 mm︱ 20-100 m/min︱ 270 mm︱ 270 mm︱ 350x220 mm︱ rund 240 mm, quadrat 170 ︱ rund 150 mm, quadrat 100 ︱ rund 210 mm, quadrat 180 ︱ 910 mm︱ 0.12 kW︱ 0.37 kW︱ 1,5 kW︱

---

DIGITAL ANGLE CONTROL blade brush control panel swivel frame infinitely adjustable lowering with hydraulic cylinder hydraulic lifting of the saw frame quick lowering with automatic switchover to working speed using a sensor pin mech. Vice with quick clamping coolant equipment machine base chip collecting tray user manualin GERMAN or ENGLISH

neu ︱ 2022 ︱ 6211 ︱ Türkei ︱ 22400 €︱ 418.88 €︱ 1 ︱ 5200x34x1,1 mm︱ 20-100 m/min︱ 440 mm︱ 440 mm︱ 610x440 mm︱ rund 410 mm, quadrat 410 ︱ rund 320 mm, quadrat 250 ︱ rund 410 mm, quadrat 410 ︱ rund 320 mm, quadrat 285 ︱ 860 mm︱ 0.12 kW︱ 0.55 kW︱ 3 kW︱

---

hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH

neu ︱ 2022 ︱ 6237 ︱ prompt, Zwischenverkauf v ︱ Türkei ︱ 7830 €︱ 1 ︱ 2730x27x0,9 mm︱ 35/70 m/min︱ 230 mm︱ 230 mm︱ 320x130 mm︱ rund 210 mm, quadrat 180 ︱ rund 120 mm, quadrat 100 ︱ rund 180 mm, quadrat 150 ︱ 760 mm︱ 0.12 kW︱ 0.37 kW︱ 1.3 kW︱ 1350 mm︱

---

DIGITAL ANGLE CONTROL swivel frame infinitely adjustable lowering with hydraulic cylinder hydraulic lifting of the saw frame mechanical vice with quick clamping coolant equipment machine base chip collecting tray user manual in GERMAN or ENGLISH

neu ︱ 2022 ︱ 6209 ︱ prompt, Zwischenverkauf v ︱ Türkei ︱ 15300 €︱ 286.11 €︱ 1 ︱ 1 ︱ 4160x34x1,1 mm︱ 20 - 100 m/min︱ 330 mm︱ 320 mm︱ 450x320 mm︱ rund 320 mm, quadrat 320 ︱ rund 320 mm, quadrat 320 ︱ rund 320 mm, quadrat 320 ︱ rund 320 mm, quadrat 320 ︱ rund 240 mm, quadrat 220 ︱ 860 mm︱

---

Double mitre cutting Inverter Saw blade 34 Hydraulic vice Heavy duty gearbox Hydromechanic blade tension Saw band brush Digital read out for mitre angle Operating manual in English or German

cutting diameter 320 mm︱saw band length 3660 mm︱cutting width 350 mm︱feed in one step 600 mm︱cutting speed 20-100 m/min︱total power requirement 4 kW︱weight of the machine ca. 1,8 t︱dimensions of the machine ca. 2,1 x 2,2 x 1,4 m︱

---

• Semi-automatic • the length of the saw will be adjusted manually to a back stop by limit switch

cutting diameter 460 mm︱saw band length 5200 x 41 x 1,3 mm︱cutting width 460 mm︱cutting capacity - flat 470 x 460 / 90° mm︱cutting capacity - round 460 / 90° mm︱speed 20 - 100 m/min︱voltage 400 V / 50 Hz︱sawing motor 4 kW︱total power requirement 4,7 kW︱weight of the machine ca. 1,665 t︱dimensions of the machine ca. 2100 x 1300 x 850 m︱

---

full-automatical band saw, Accessories: • Inverter for controllable speed, • automatical stop function after sawing and on breakage of the saw blade, • automatical saw arm lifting, • hydro-mechanical clamping of the saw blade, • material clamping to be effected from above, hydraulical vice, • switch for cutting pressure control, • coolant pump, • roller conveyor, length: 1.2 m.

cutting diameter 260 mm︱saw band length mm︱cutting width 300 mm︱

---

cutting diameter 240 mm︱saw band length mm︱cutting width 270 mm︱

---