Rete europea di concessionari di macchine per stoccaggio

Bitte einen Suchbegriff eingeben - Inserisci un termine di ricerca
Categoria:
    Produttore:
      macchine:
        trader:

          Hydr. pressbrake

          Machinelist: Hydr. pressbrake


          Hydr. pressbrake

          used Sheet metal working / shaeres / bending Hydr. pressbrake LAG GHT 185-3000


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4020902 · Hydr. pressbrake

          LAG - GHT 185-3000 - - NEU - DELEM DA-66T

          Technical details
          pressure 185 t︱chamfer lenght 3100 mm︱distance between columns 2600 mm︱throat 500 mm︱ 300 mm︱dayligth 500 mm︱work height max. 950 mm︱working feed 0-10 mm/sec︱return speed 140 mm/sec︱engine output 18,5 kW︱control DELEM DA-66T ︱weight of the machine ca. 15000 kg︱dimensions of the machine ca. 4000x2600x3400 mm︱
            pressure 185 t
            chamfer lenght 3100 mm
            distance between columns 2600 mm
            throat 500 mm
            300 mm
            dayligth 500 mm
            work height max. 950 mm
            working feed 0-10 mm/sec
            return speed 140 mm/sec
            engine output 18,5 kW
            control DELEM DA-66T
            weight of the machine ca. 15000 kg
            dimensions of the machine ca. 4000x2600x3400 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake LAG GHM 25-1250


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4020848 · Hydr. pressbrake

          LAG - GHM 25-1250 - - Neu - DELEM DA 58 T

          Technical details
          pressure 25 t︱chamfer lenght 1250 mm︱distance between columns 1200 mm︱Control DELEM DA 58 T ︱stroke 150 mm︱dayligth 340 mm︱feed down 200 mm/sec︱feed bending 0-10 mm/sec︱feed bending 170 mm/sec︱total power requirement 4 kW︱weight of the machine ca. 1.900 kg︱dimensions of the machine ca. 1800x1100x2000 mm︱
          Accessories / equipment: - DELEM DA 58 T control - PC offline software - Stop fingers on the backgauge X-R + 2 mnauelle stop fingers - Upper hydraulic tool clamp WILA type Pro - Lower pneumatic tool clamp with 13 mm T-slot for WILA and PROMECAM matrices - foot pedal - 2 pieces of front support arms - The surface of the hydraulic cylinder is chrome-plated - LASER DSP AP safety system according to CE - 2 side protection doors - 1 x DC motor - Safety standard according to CE standard - Operating manual
            pressure 25 t
            chamfer lenght 1250 mm
            distance between columns 1200 mm
            Control DELEM DA 58 T
            stroke 150 mm
            dayligth 340 mm
            feed down 200 mm/sec
            feed bending 0-10 mm/sec
            feed bending 170 mm/sec
            total power requirement 4 kW
            weight of the machine ca. 1.900 kg
            dimensions of the machine ca. 1800x1100x2000 mm
            Description :
            Accessories / equipment:
            - DELEM DA 58 T control
            - PC offline software
            - Stop fingers on the backgauge X-R + 2 mnauelle stop fingers
            - Upper hydraulic tool clamp WILA type Pro
            - Lower pneumatic tool clamp with 13 mm T-slot for WILA and PROMECAM matrices
            - foot pedal
            - 2 pieces of front support arms
            - The surface of the hydraulic cylinder is chrome-plated
            - LASER DSP AP safety system according to CE
            - 2 side protection doors
            - 1 x DC motor
            - Safety standard according to CE standard
            - Operating manual


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake FARINA GBP PLUS 30220


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4020952 · Hydr. pressbrake

          FARINA - GBP PLUS 30220 - - Neu - CYBELEC VisiTouch 19 2D

          Technical details
          pressure 220 t︱chamfer lenght 3150 mm︱distance between columns 2600 mm︱Control CYBELEC VisiTouch 19 2D ︱dayligth 525 mm︱stroke 275 mm︱feed down 150 mm/sec︱feed bending 0-10 mm/sec︱feed up 120 mm/sec︱total power requirement 18,5 kW︱weight of the machine ca. 15.600 kg︱dimensions of the machine ca. 4250x2000x3150 mm︱
            pressure 220 t
            chamfer lenght 3150 mm
            distance between columns 2600 mm
            Control CYBELEC VisiTouch 19 2D
            dayligth 525 mm
            stroke 275 mm
            feed down 150 mm/sec
            feed bending 0-10 mm/sec
            feed up 120 mm/sec
            total power requirement 18,5 kW
            weight of the machine ca. 15.600 kg
            dimensions of the machine ca. 4250x2000x3150 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake COLLY 3000/140


          • Intermach BV
          • lange voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)527 201323
          • info@intermach.nl
            www.intermach.nl
          #2050-2010012 · Hydr. pressbrake

          COLLY - 3000/140 - - NB -

          Technical details
          pressure 140 t︱chamfer lenght 3000 mm︱distance between columns mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Stocknumber 2010012 Type of machine Pressbrake Make COLLY Type 3000/140 Build in nb Chamfer lenght 3000 mm Pressure 140 ton Stroke 250 mm Throat 310 mm Daylight 520 mm Additional information incl. 1 set of tooling
            pressure 140 t
            chamfer lenght 3000 mm
            Description :
            Stocknumber 2010012
            Type of machine Pressbrake
            Make COLLY
            Type 3000/140
            Build in nb
            Chamfer lenght 3000 mm
            Pressure 140 ton
            Stroke 250 mm
            Throat 310 mm
            Daylight 520 mm


            Additional information
            incl. 1 set of tooling




        • Intermach BV
        • lange voor 71
        • 8316BC Marknesse
        • Niederlande

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake ERMAK POWER BEND FALCON 3.135


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2300001 · Hydr. pressbrake

          ERMAK - POWER BEND FALCON 3.135 - - 2022 (NEU) - DELEM DA 66 T

          Technical details
          pressure 135 t︱chamfer lenght 3100 mm︱distance between columns 2600 mm︱dayligth 550 mm︱throat 410 mm︱stroke 275 mm︱working feed 10,0 mm/sec︱return speed 120,0 mm/sec︱work height max. 900 mm︱quantity of oil 200 l︱Control DELEM DA 66 T ︱total power requirement 11 kW︱weight of the machine ca. 8650 kg︱dimensions 4250 x 2050 x 2800 mm︱
          -------------------------------------------------- --------- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds -------------------------------------------------- --------- Furnishing: - DELEM CNC control model DA-66T graphic/touch screen * 2D graphical programming * 17" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface * intuitive, graphical entry of profiles * Automatic calculation of features: tool safety zones, Press force, bending tolerance, crown setting, stretched Length, embossing force, flattening, automatic rounding calculation * Radius programming * Graphic tool and product library * Collision monitoring * 3D visualization * 1GB memory - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp - additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm mount - BOSCH/HOERBIGER hydr. components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protection device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "Sliding-System", with T-slot and cam - 1x double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes
            pressure 135 t
            chamfer lenght 3100 mm
            distance between columns 2600 mm
            dayligth 550 mm
            throat 410 mm
            stroke 275 mm
            working feed 10,0 mm/sec
            return speed 120,0 mm/sec
            work height max. 900 mm
            quantity of oil 200 l
            Control DELEM DA 66 T
            total power requirement 11 kW
            weight of the machine ca. 8650 kg
            dimensions 4250 x 2050 x 2800 mm
            Description :
            -------------------------------------------------- ---------
            Press brake with special equipment
            * increased installation height
            * increased cylinder stroke
            * as well as increased bending beam speeds
            -------------------------------------------------- ---------
            Furnishing:
            - DELEM CNC control model DA-66T graphic/touch screen
            * 2D graphical programming
            * 17" TFT color screen with high resolution
            * Bending sequence calculation
            * Product programming and real size display
            * USB interface
            * intuitive, graphical entry of profiles
            * Automatic calculation of features: tool safety zones,
            Press force, bending tolerance, crown setting, stretched
            Length, embossing force, flattening, automatic rounding calculation
            * Radius programming
            * Graphic tool and product library
            * Collision monitoring
            * 3D visualization
            * 1GB memory
            - Motorized backgauge with R-axis, on ball screws
            - X = 800 mm R = 250 mm with 2 stop fingers
            - controlled axes Y1 - Y2 - X - R - C (crowning)
            - electr. Crowning controlled by CNC
            - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp
            - additional crowning device in the tool holder of the upper tool
            - 4V universal die block M 460 R with die shoe 60 mm mount
            - BOSCH/HOERBIGER hydr. components
            - SIEMENS electrical system
            - LEUZE light barrier behind the machine
            - FIESSLER AKAS laser with FPSC protection device v.d. machine
            - Swiveling control panel, mounted on the left
            - 2x front support arms "Sliding-System", with T-slot and cam
            - 1x double foot control
            - CE mark / declaration of conformity
            - Operating manual: Machine and control in German
            - Safety manual : press brakes


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake ERMAK POWER BEND FALCON 3.175


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7347 · Hydr. pressbrake

          ERMAK - POWER BEND FALCON 3.175 - - 2022 (NEU) - DELEM DA 58 T

          Technical details
          pressure 175 t︱chamfer lenght 3100 mm︱distance between columns 2600 mm︱dayligth 550 mm︱throat 410 mm︱stroke 275 mm︱working feed 10 mm/sec︱return speed 135 mm/sec︱work height max. 900 mm︱quantity of oil 200 l︱Control DELEM DA 58 T ︱total power requirement 15 kW︱weight of the machine ca. 9450 kg︱
          - DELEM CNC control model DA-58T graphics / touchscreen * 2D graphic programming * 15 "high definition color TFT screen * Bending sequence calculation * Product programming and display in real size * USB interface - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135.85-R08, system "A" with quick-change clamp - Additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm holder - BOSCH / HOERBIGER hydr. Components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protective device v.d. machine Protective device against d. machine - Swiveling control panel, mounted on the left - 2x front support arms "sliding system", with T-slot and tilting cam - 1x double foot control - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes
            pressure 175 t
            chamfer lenght 3100 mm
            distance between columns 2600 mm
            dayligth 550 mm
            throat 410 mm
            stroke 275 mm
            working feed 10 mm/sec
            return speed 135 mm/sec
            work height max. 900 mm
            quantity of oil 200 l
            Control DELEM DA 58 T
            total power requirement 15 kW
            weight of the machine ca. 9450 kg
            Description :
            - DELEM CNC control model DA-58T graphics / touchscreen
            * 2D graphic programming
            * 15 "high definition color TFT screen
            * Bending sequence calculation
            * Product programming and display in real size
            * USB interface
            - Motorized backgauge with R-axis, on recirculating ball spindles
            - X = 800 mm R = 250 mm with 2 stop fingers
            - controlled axes Y1 - Y2 - X - R - C (crowning)
            - electr. Crowning controlled by CNC
            - Upper deer foot tool with PS 135.85-R08, system "A" with quick-change clamp
            - Additional crowning device in the tool holder of the upper tool
            - 4V universal die block M 460 R with die shoe 60 mm holder
            - BOSCH / HOERBIGER hydr. Components
            - SIEMENS electrical system
            - LEUZE light barrier behind the machine
            - FIESSLER AKAS laser with FPSC protective device v.d. machine
            Protective device against d. machine
            - Swiveling control panel, mounted on the left
            - 2x front support arms "sliding system", with T-slot and tilting cam
            - 1x double foot control
            - CE mark / declaration of conformity
            - User manual: machine and control in German
            - Safety manual: press brakes


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake ERMAK SPEED BEND PRO 4.220


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7459 · Hydr. pressbrake

          ERMAK - SPEED BEND PRO 4.220 - - 2022 (NEU) - DELEM DA 66T

          Technical details
          pressure 220 t︱chamfer lenght 4100 mm︱distance between columns 3600 mm︱dayligth 550 mm︱throat 410 mm︱stroke 275 mm︱working feed 10,0 mm/sec︱return speed 185 mm/sec︱quantity of oil 300 l︱Control DELEM DA 66T ︱total power requirement 18,5 kW︱weight of the machine ca. 13900 kg︱dimensions 5150 x 2250 x 3000 mm︱
          HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke increased projection -------------------------------------------------- ------- Furnishing: - DELEM CNC control model DA 66T - swiveling touch screen control unit - 7 controlled axes : Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split deer foot upper tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Universal die block - LEUZE light barrier behind d. machine - BOSCH/HOERBIGER hydr. components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (incl. FPSC) - 2 front support arms with SLIDING system (slide bearing) - Double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes Special equipment included: - electric central lubrication
            pressure 220 t
            chamfer lenght 4100 mm
            distance between columns 3600 mm
            dayligth 550 mm
            throat 410 mm
            stroke 275 mm
            working feed 10,0 mm/sec
            return speed 185 mm/sec
            quantity of oil 300 l
            Control DELEM DA 66T
            total power requirement 18,5 kW
            weight of the machine ca. 13900 kg
            dimensions 5150 x 2250 x 3000 mm
            Description :
            HIGH-SPEED hydraulic press brake with
            increased installation height
            increased cylinder stroke
            increased projection
            -------------------------------------------------- -------
            Furnishing:
            - DELEM CNC control model DA 66T
            - swiveling touch screen control unit
            - 7 controlled axes : Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning
            - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm
            - on ball screws
            - controlled electr. Stop fingers Z1 + Z2
            - split deer foot upper tool Roleri 135.85.R08, "System A"
            - with additional crowning of the upper wedge
            - Universal die block
            - LEUZE light barrier behind d. machine
            - BOSCH/HOERBIGER hydr. components
            - SIEMENS - electrical system
            - FIESSLER AKAS laser protection device in front of the machine (incl. FPSC)
            - 2 front support arms with SLIDING system (slide bearing)
            - Double foot control
            - CE mark / declaration of conformity
            - Operating manual: Machine and control in German
            - Safety manual : press brakes
            Special equipment included:
            - electric central lubrication


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake BERNARDO AKPL 1600 x 40


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8308158 · Hydr. pressbrake

          BERNARDO - AKPL 1600 x 40 - - 2022 - NC

          Technical details
          pressure 40,0 t︱chamfer lenght 1600 mm︱distance between columns 1200 mm︱column arm 200 mm︱ram stroke speed 60,0 mm/sec︱return speed 8,0 mm/sec︱work speed 60,0 mm/sec︱work stroke 100 mm︱table height 760 mm︱table width 150 mm︱oil volume 130 ltr.︱voltage 400 Volt︱Control NC ︱total power requirement 4,0 kW︱weight 3030 kg︱range L-W-H 2050 x 1800 x 2030 mm︱
          ** Exhibition machine - like NEW (!!) Furnishing: - compact hydraulic press brake - BERNARDO NC control model E21 - swiveling control panel - electrical adjustment of the backgauge - Back stop on recirculating ball spindles - electrical adjustment of the immersion depth - Laser protection device in front - Upper deer foot tool - divided - Tool holder with quick change system - Universal die block - side + rear protective device - 2x front support arms - movable double foot switch (operation)
            pressure 40,0 t
            chamfer lenght 1600 mm
            distance between columns 1200 mm
            column arm 200 mm
            ram stroke speed 60,0 mm/sec
            return speed 8,0 mm/sec
            work speed 60,0 mm/sec
            work stroke 100 mm
            table height 760 mm
            table width 150 mm
            oil volume 130 ltr.
            voltage 400 Volt
            Control NC
            total power requirement 4,0 kW
            weight 3030 kg
            range L-W-H 2050 x 1800 x 2030 mm
            Description :
            ** Exhibition machine - like NEW (!!)

            Furnishing:
            - compact hydraulic press brake
            - BERNARDO NC control model E21
            - swiveling control panel
            - electrical adjustment of the backgauge
            - Back stop on recirculating ball spindles
            - electrical adjustment of the immersion depth
            - Laser protection device in front
            - Upper deer foot tool - divided
            - Tool holder with quick change system
            - Universal die block
            - side + rear protective device
            - 2x front support arms
            - movable double foot switch (operation)


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake Assistmach Maxima 45175


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-111149 · Hydr. pressbrake

          Assistmach - Maxima 45175 - - 2022 -

          Technical details
          pressure 175 t︱chamfer lenght 4600 mm︱distance between columns 4050 mm︱column arm mm︱ajustment speed mm/sec︱working feed mm/sec︱return speed mm/sec︱work stroke mm︱back stop - adjustable mm︱table height mm︱table width mm︱tank capacity l︱weight t︱total power requirement kW︱Overall size m︱
            pressure 175 t
            chamfer lenght 4600 mm
            distance between columns 4050 mm


        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake Assistmach Maxima 1260


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-11103 · Hydr. pressbrake

          Assistmach - Maxima 1260 - - 2022 -

          Technical details
          pressure 40 t︱chamfer lenght 1300 mm︱distance between columns 1000 mm︱column arm 300 mm︱ajustment speed 180 mm/sec︱working feed 10 mm/sec︱return speed 150 mm/sec︱work stroke 180 mm︱back stop - adjustable 650 mm︱total power requirement 5,5 kW︱weight 2,5 t︱Overall size 2,12 x 2,0 x 2,1 m︱
            pressure 40 t
            chamfer lenght 1300 mm
            distance between columns 1000 mm
            column arm 300 mm
            ajustment speed 180 mm/sec
            working feed 10 mm/sec
            return speed 150 mm/sec
            work stroke 180 mm
            back stop - adjustable 650 mm
            total power requirement 5,5 kW
            weight 2,5 t
            Overall size 2,12 x 2,0 x 2,1 m


        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake Assistmach Maxima 37320


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-111134 · Hydr. pressbrake

          Assistmach - Maxima 37320 - - 2022 -

          Technical details
          pressure 320 t︱chamfer lenght 3700 mm︱distance between columns 3100 mm︱column arm 450 mm︱ajustment speed 140 mm/sec︱working feed 10 mm/sec︱return speed 100 mm/sec︱work stroke 370 mm︱back stop - adjustable 650 mm︱table height 920 mm︱table width 120 mm︱tank capacity 300 l︱weight 14,8 t︱total power requirement 30 kW︱Overall size 4,36 x 2,69 x 3,15 m︱
            pressure 320 t
            chamfer lenght 3700 mm
            distance between columns 3100 mm
            column arm 450 mm
            ajustment speed 140 mm/sec
            working feed 10 mm/sec
            return speed 100 mm/sec
            work stroke 370 mm
            back stop - adjustable 650 mm
            table height 920 mm
            table width 120 mm
            tank capacity 300 l
            weight 14,8 t
            total power requirement 30 kW
            Overall size 4,36 x 2,69 x 3,15 m


        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake Assistmach Maxima 41400


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-111146 · Hydr. pressbrake

          Assistmach - Maxima 41400 - - 2022 -

          Technical details
          pressure 400 t︱chamfer lenght 4100 mm︱distance between columns 3550 mm︱column arm 550 mm︱ajustment speed 100 mm/sec︱working feed 10 mm/sec︱return speed 80 mm/sec︱work stroke 370 mm︱back stop - adjustable 650 mm︱table height 1030 mm︱table width 150 mm︱tank capacity 400 l︱weight 22,0 t︱total power requirement 37 kW︱Overall size 4,99 x 2,7 x 3,28 m︱
            pressure 400 t
            chamfer lenght 4100 mm
            distance between columns 3550 mm
            column arm 550 mm
            ajustment speed 100 mm/sec
            working feed 10 mm/sec
            return speed 80 mm/sec
            work stroke 370 mm
            back stop - adjustable 650 mm
            table height 1030 mm
            table width 150 mm
            tank capacity 400 l
            weight 22,0 t
            total power requirement 37 kW
            Overall size 4,99 x 2,7 x 3,28 m


        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake Assistmach Maxima 31400


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-111125 · Hydr. pressbrake

          Assistmach - Maxima 31400 - - 2022 -

          Technical details
          pressure 400 t︱chamfer lenght 3100 mm︱distance between columns 2.550 mm︱column arm 550 mm︱ajustment speed 100 mm/sec︱working feed 10 mm/sec︱return speed 100 mm/sec︱work stroke 370 mm︱back stop - adjustable 650 mm︱table height 1030 mm︱table width 150 mm︱tank capacity 400 l︱weight 19,5 t︱total power requirement 37 kW︱Overall size 3,99 x 2,7 x 3,28 m︱
            pressure 400 t
            chamfer lenght 3100 mm
            distance between columns 2.550 mm
            column arm 550 mm
            ajustment speed 100 mm/sec
            working feed 10 mm/sec
            return speed 100 mm/sec
            work stroke 370 mm
            back stop - adjustable 650 mm
            table height 1030 mm
            table width 150 mm
            tank capacity 400 l
            weight 19,5 t
            total power requirement 37 kW
            Overall size 3,99 x 2,7 x 3,28 m


        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake Assistmach Maxima 41220


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-111140 · Hydr. pressbrake

          Assistmach - Maxima 41220 - - 2022 -

          Technical details
          pressure 220 t︱chamfer lenght 4100 mm︱distance between columns 3550 mm︱column arm 450 mm︱ajustment speed 140 mm/sec︱working feed 10 mm/sec︱return speed 100 mm/sec︱work stroke 270 mm︱back stop - adjustable 650 mm︱table height 920 mm︱table width 120 mm︱tank capacity 200 l︱weight 19,8 t︱total power requirement 18,5 kW︱Overall size 4,67 x2,27 x 2,96 m︱
            pressure 220 t
            chamfer lenght 4100 mm
            distance between columns 3550 mm
            column arm 450 mm
            ajustment speed 140 mm/sec
            working feed 10 mm/sec
            return speed 100 mm/sec
            work stroke 270 mm
            back stop - adjustable 650 mm
            table height 920 mm
            table width 120 mm
            tank capacity 200 l
            weight 19,8 t
            total power requirement 18,5 kW
            Overall size 4,67 x2,27 x 2,96 m


        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake Assistmach Maxima 31100


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-111112 · Hydr. pressbrake

          Assistmach - Maxima 31100 - - 2022 -

          Technical details
          pressure 100 t︱chamfer lenght 3100 mm︱distance between columns 2550 mm︱column arm 450 mm︱ajustment speed 160 mm/sec︱working feed 10 mm/sec︱return speed 120 mm/sec︱work stroke 270 mm︱back stop - adjustable 650 mm︱table height 850 mm︱table width 100 mm︱tank capacity 200 l︱total power requirement 7,5 kW︱weight 7,5 t︱Overall size 3,76 x 2,15 x 2,76 m︱
          GENERAL SPECIFICATIONS Hydraulic operation with two cylinders – Assistmach High performance hydraulic gear pump – Rexroth High pressure filter (with clogging detector and bypass) placed before all components, Air removal filter in the reservoir Fast descent by gravity, bending phase and return of the ram are controlled electronically via a proportional flow valves h Bending force controlled by proportional pressure valves – Rexroth Quality oil with high viscosity index Frame is designed and sized using Analyze program Hydraulic components from leading companies worldwide – Rexroth Connectors and system tube sizing according to din regulations Flanged connectors and hoses according to sae regulations Construction of cylinders with high quality materials, hardening and very accurate finishing for the sliding surfaces Choice of seals and sizing of the housings is a result of many years of experience Preventive system flushing and thorough testing We only use welded steel with high tensile strength and stiffness Standard Equipments (Y1, Y2, X) 3 axis Synchro Press Brake Manual Crowning Control Unit - Cybelec Cytbtouch 12 Graphic Control CE-Norm with DSP safety for top beam (PLC incl.) Quick Release European Clamping system 60 mm Die Holder LED Lights on front cover Back gauge: Motorized & Linear guide & Ballscrew system Back gauge fingers - height adjustable Back gauge motors: AC motors Sliding Front Arms with full length linear guide Safety covers for side and light barrier for the back
            pressure 100 t
            chamfer lenght 3100 mm
            distance between columns 2550 mm
            column arm 450 mm
            ajustment speed 160 mm/sec
            working feed 10 mm/sec
            return speed 120 mm/sec
            work stroke 270 mm
            back stop - adjustable 650 mm
            table height 850 mm
            table width 100 mm
            tank capacity 200 l
            total power requirement 7,5 kW
            weight 7,5 t
            Overall size 3,76 x 2,15 x 2,76 m
            Description :
            GENERAL SPECIFICATIONS
            Hydraulic operation with two cylinders – Assistmach
            High performance hydraulic gear pump – Rexroth
            High pressure filter (with clogging detector and bypass) placed before all
            components,
            Air removal filter in the reservoir
            Fast descent by gravity, bending phase and return of the ram are controlled
            electronically via a proportional flow valves h
            Bending force controlled by proportional pressure valves – Rexroth
            Quality oil with high viscosity index
            Frame is designed and sized using Analyze program
            Hydraulic components from leading companies worldwide – Rexroth
            Connectors and system tube sizing according to din regulations
            Flanged connectors and hoses according to sae regulations
            Construction of cylinders with high quality materials, hardening and very
            accurate finishing for the sliding surfaces
            Choice of seals and sizing of the housings is a result of many years of
            experience
            Preventive system flushing and thorough testing
            We only use welded steel with high tensile strength and stiffness

            Standard Equipments
            (Y1, Y2, X) 3 axis Synchro Press Brake
            Manual Crowning
            Control Unit - Cybelec Cytbtouch 12 Graphic Control
            CE-Norm with DSP safety for top beam (PLC incl.)
            Quick Release European Clamping system
            60 mm Die Holder
            LED Lights on front cover
            Back gauge: Motorized & Linear guide & Ballscrew system
            Back gauge fingers - height adjustable
            Back gauge motors: AC motors
            Sliding Front Arms with full length linear guide
            Safety covers for side and light barrier for the back


        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake Assistmach Maxima 37220


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-111131 · Hydr. pressbrake

          Assistmach - Maxima 37220 - - 2022 -

          Technical details
          pressure 175 t︱chamfer lenght 3700 mm︱distance between columns 3100 mm︱column arm 450 mm︱ajustment speed 140 mm/sec︱working feed 10 mm/sec︱return speed 120 mm/sec︱work stroke 270 mm︱back stop - adjustable 650 mm︱table height 920 mm︱table width 120 mm︱tank capacity 200 l︱weight 12,3 t︱total power requirement 18,5 kW︱Overall size 4,36 x 2,69 x 3,15 m︱
            pressure 175 t
            chamfer lenght 3700 mm
            distance between columns 3100 mm
            column arm 450 mm
            ajustment speed 140 mm/sec
            working feed 10 mm/sec
            return speed 120 mm/sec
            work stroke 270 mm
            back stop - adjustable 650 mm
            table height 920 mm
            table width 120 mm
            tank capacity 200 l
            weight 12,3 t
            total power requirement 18,5 kW
            Overall size 4,36 x 2,69 x 3,15 m


        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake Assistmach Maxima 61320


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-111161 · Hydr. pressbrake

          Assistmach - Maxima 61320 - - 2022 -

          Technical details
          pressure 320 t︱chamfer lenght 6100 mm︱distance between columns 5100 mm︱column arm 450 mm︱ajustment speed 100 mm/sec︱working feed 10 mm/sec︱return speed 100 mm/sec︱work stroke 370 mm︱back stop - adjustable 650 mm︱table height 920 mm︱table width 150 mm︱tank capacity 300 l︱weight 23,5 t︱total power requirement 30 kW︱Overall size 6,67 x 2,55 x 3,1 m︱
            pressure 320 t
            chamfer lenght 6100 mm
            distance between columns 5100 mm
            column arm 450 mm
            ajustment speed 100 mm/sec
            working feed 10 mm/sec
            return speed 100 mm/sec
            work stroke 370 mm
            back stop - adjustable 650 mm
            table height 920 mm
            table width 150 mm
            tank capacity 300 l
            weight 23,5 t
            total power requirement 30 kW
            Overall size 6,67 x 2,55 x 3,1 m


        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake Assistmach Maxima 1240


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-11100 · Hydr. pressbrake

          Assistmach - Maxima 1240 - - 2022 -

          Technical details
          pressure 40 t︱chamfer lenght 1300 mm︱distance between columns 1000 mm︱column arm 300 mm︱ajustment speed 180 mm/sec︱working feed 10 mm/sec︱return speed 150 mm/sec︱work stroke 180 mm︱back stop - adjustable 650 mm︱total power requirement 5,5 kW︱weight 2,5 t︱Overall size 2,12 x 2,0 x 2,1 m︱
            pressure 40 t
            chamfer lenght 1300 mm
            distance between columns 1000 mm
            column arm 300 mm
            ajustment speed 180 mm/sec
            working feed 10 mm/sec
            return speed 150 mm/sec
            work stroke 180 mm
            back stop - adjustable 650 mm
            total power requirement 5,5 kW
            weight 2,5 t
            Overall size 2,12 x 2,0 x 2,1 m


        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake HACO SynchroMaster 30200


          • Volz Werkzeugmaschinen
          • Friedrich-Ebert Straße 78-80
          • 58454 Witten-Annen
          • Deutschland

          • +49 (0) 23 02 / 98 72 – 0
            +49 (0) 23 02 / 98 72 - 50
          • anfrage@volz-witten.de
            www.volz-witten.de
          #1134-090000 · Hydr. pressbrake

          HACO - SynchroMaster 30200 - - 2022 - EasyBEND-2D MT

          Technical details
          200 t︱ 3100 mm︱ 2600 mm︱ 400 mm︱ 270 mm︱ 800 mm︱
            200 t
            3100 mm
            2600 mm
            400 mm
            270 mm
            800 mm


        • Volz Werkzeugmaschinen
        • Friedrich-Ebert Straße 78-80
        • 58454 Witten-Annen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake Assistmach Maxima 2060


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-11106 · Hydr. pressbrake

          Assistmach - Maxima 2060 - - 2022 -

          Technical details
          pressure 40 t︱chamfer lenght 1300 mm︱distance between columns 1000 mm︱column arm 300 mm︱ajustment speed 180 mm/sec︱working feed 10 mm/sec︱return speed 150 mm/sec︱work stroke 180 mm︱back stop - adjustable 650 mm︱total power requirement 5,5 kW︱weight 2,5 t︱Overall size 2,12 x 2,0 x 2,1 m︱
            pressure 40 t
            chamfer lenght 1300 mm
            distance between columns 1000 mm
            column arm 300 mm
            ajustment speed 180 mm/sec
            working feed 10 mm/sec
            return speed 150 mm/sec
            work stroke 180 mm
            back stop - adjustable 650 mm
            total power requirement 5,5 kW
            weight 2,5 t
            Overall size 2,12 x 2,0 x 2,1 m


        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake Assistmach Maxima 25100


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-11109 · Hydr. pressbrake

          Assistmach - Maxima 25100 - - 2022 -

          Technical details
          pressure 40 t︱chamfer lenght 1300 mm︱distance between columns 1000 mm︱column arm 300 mm︱ajustment speed 180 mm/sec︱working feed 10 mm/sec︱return speed 150 mm/sec︱work stroke 180 mm︱back stop - adjustable 650 mm︱total power requirement 5,5 kW︱weight 2,5 t︱Overall size 2,12 x 2,0 x 2,1 m︱
            pressure 40 t
            chamfer lenght 1300 mm
            distance between columns 1000 mm
            column arm 300 mm
            ajustment speed 180 mm/sec
            working feed 10 mm/sec
            return speed 150 mm/sec
            work stroke 180 mm
            back stop - adjustable 650 mm
            total power requirement 5,5 kW
            weight 2,5 t
            Overall size 2,12 x 2,0 x 2,1 m


        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake Assistmach Maxima 31220


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-111119 · Hydr. pressbrake

          Assistmach - Maxima 31220 - - 2022 -

          Technical details
          pressure 220 t︱chamfer lenght 3.100 mm︱distance between columns 2.550 mm︱column arm 450 mm︱ajustment speed 140 mm/sec︱working feed 10 mm/sec︱return speed 120 mm/sec︱work stroke 270 mm︱back stop - adjustable 650 mm︱table height 920 mm︱table width 120 mm︱tank capacity 200 l︱weight 11 t︱total power requirement 18,5 kW︱Overall size 3,77 x 2,27 x 2,96 m︱
            pressure 220 t
            chamfer lenght 3.100 mm
            distance between columns 2.550 mm
            column arm 450 mm
            ajustment speed 140 mm/sec
            working feed 10 mm/sec
            return speed 120 mm/sec
            work stroke 270 mm
            back stop - adjustable 650 mm
            table height 920 mm
            table width 120 mm
            tank capacity 200 l
            weight 11 t
            total power requirement 18,5 kW
            Overall size 3,77 x 2,27 x 2,96 m


        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake Assistmach Maxima 31135


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-111115 · Hydr. pressbrake

          Assistmach - Maxima 31135 - - 2022 -

          Technical details
          pressure 135 t︱chamfer lenght 3100 mm︱distance between columns 2550 mm︱column arm 450 mm︱ajustment speed 160 mm/sec︱working feed 10 mm/sec︱return speed 120 mm/sec︱work stroke 270 mm︱back stop - adjustable 650 mm︱table width 120 mm︱table height 850 mm︱tank capacity 200 l︱total power requirement 11 kW︱weight 8,5 t︱Overall size 3,76 x 2.15 x 2,76 m︱
            pressure 135 t
            chamfer lenght 3100 mm
            distance between columns 2550 mm
            column arm 450 mm
            ajustment speed 160 mm/sec
            working feed 10 mm/sec
            return speed 120 mm/sec
            work stroke 270 mm
            back stop - adjustable 650 mm
            table width 120 mm
            table height 850 mm
            tank capacity 200 l
            total power requirement 11 kW
            weight 8,5 t
            Overall size 3,76 x 2.15 x 2,76 m


        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake Assistmach Maxima 61400


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-111164 · Hydr. pressbrake

          Assistmach - Maxima 61400 - - 2022 -

          Technical details
          pressure 400 t︱chamfer lenght 6100 mm︱distance between columns 5100 mm︱column arm 450 mm︱ajustment speed 100 mm/sec︱working feed 10 mm/sec︱return speed 80 mm/sec︱work stroke 370 mm︱back stop - adjustable 650 mm︱table height 1030 mm︱table width 150 mm︱tank capacity 400 l︱weight 30 t︱total power requirement 37 kW︱Overall size 6,67 x 2,7 x 3,28 m︱
            pressure 400 t
            chamfer lenght 6100 mm
            distance between columns 5100 mm
            column arm 450 mm
            ajustment speed 100 mm/sec
            working feed 10 mm/sec
            return speed 80 mm/sec
            work stroke 370 mm
            back stop - adjustable 650 mm
            table height 1030 mm
            table width 150 mm
            tank capacity 400 l
            weight 30 t
            total power requirement 37 kW
            Overall size 6,67 x 2,7 x 3,28 m


        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   


          Buy used hydraulic press brakes from LagerMaschinen
          Hydraulic press brakes from LagerMaschinen are a great idea

          When purchasing machines for your newly opened or expanding company the prices of brand new machines can be daunting or downright limiting. With LagerMaschinen the customer is able to research find and purchase the hydraulic press breaks that fit their needs as well as being reasonably priced. LagerMaschinen's online platform is designed to give customers and sellers alike what they need: an appropriate space for communication regarding hydraulic press brakes to be bought and sold technical specifications and measurements and delivery and installation services. LagerMaschinen's goal is to provide everyone with what they need to best meet their professional and financial goals. By working with LagerMaschinen your search for the right hydraulic press brakes is faster more informed and more affordable.

          Used hydraulic press brakes from LagerMaschinen

          Hydraulic press brakes are used to bend metal - most often sheet metal - to the appropriate size and shape needed. These machines are used in a wide variety of industries serving as either part of a series of production steps or as the primary machine needed. Certain hydraulic press brakes are additionally fitted with different dies such as v-dies (producing a 'v' shape) offset dies (forming a 'z' shape) or curling dies (curling the end of the sheet metal. Hydraulic press brakes are more high-powered safer (as they can be stopped more easily in the event of an emergency) and produce more uniform results. With LagerMaschinen's wide inventory of hydraulic press brakes and other machines you'll surely find the product that's right for your production needs.