,
Rete europea di concessionari di macchine per stoccaggio

Bitte einen Suchbegriff eingeben - Inserisci un termine di ricerca
Categoria:
    Produttore:
      macchine:
        trader:

          Stamping and Punching Machine

          Machinelist: Stamping and Punching Machine


          Stamping and Punching Machine

          used Sheet metal working / shaeres / bending Stamping and Punching Machine HUVEMA HU 40 HKM


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-PON167 · Stamping and Punching Machine

          HUVEMA - HU 40 HKM - - 2022 -

          Technical details
          Capacity - T︱Punch unit 20 x 15 - 30 x 10 mm︱Round - mm ø︱Strip 200 x 13 - 300 x 6 mm︱Angle iron 80 x 80 x 8 mm︱
          Brand Huvema Type HU 40 HKM Year of make 2022 Machine weight 580 kg Punch unit 20x15 - 30x10 mm Strip 200x13 - 300x6 angle iron 80x80x8 Hydraulic control
            Capacity - T
            Punch unit 20 x 15 - 30 x 10 mm
            Round - mm ø
            Strip 200 x 13 - 300 x 6 mm
            Angle iron 80 x 80 x 8 mm
            Description :
            Brand Huvema
            Type HU 40 HKM
            Year of make 2022
            Machine weight 580 kg
            Punch unit 20x15 - 30x10 mm
            Strip 200x13 - 300x6
            angle iron 80x80x8
            Hydraulic control



        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Stamping and Punching Machine Trumpf TruPunch 3000-1300 (S11)


          • PTF GmbH
          • Kreuzsteig 6
          • 72479 Straßberg
          • Deutschland

          • +49 7574 93 622 83
            +49 7574 92 17 24
          • info@ptf-maschinen.de
            www.ptf-maschinen.de
          #2054-3169 · Stamping and Punching Machine

          Trumpf - TruPunch 3000-1300 (S11) - - 2014 -

          Technical details
          Working hours machine 46115 h︱Control Bosch MTX CMP 70 ︱Length 6500 mm︱Width 6000 mm︱Machine weight 9800 kg︱
            Working hours machine 46115 h
            Control Bosch MTX CMP 70
            Length 6500 mm
            Width 6000 mm
            Machine weight 9800 kg


        • PTF GmbH
        • Kreuzsteig 6
        • 72479 Straßberg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Stamping and Punching Machine TRUMPF TruPunch 5000


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4051756 · Stamping and Punching Machine

          TRUMPF - TruPunch 5000 - - 2013 -

          Technical details
          Punching force 220 kN︱plate thickness 8 mm︱working area 3050 x 1550 mm︱max. workpiece weight 230 kg︱machine weight ab. 17.300 kg︱dimensions 7610 x 8171 x 2072 mm︱
            Punching force 220 kN
            plate thickness 8 mm
            working area 3050 x 1550 mm
            max. workpiece weight 230 kg
            machine weight ab. 17.300 kg
            dimensions 7610 x 8171 x 2072 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Stamping and Punching Machine SAHINLER HPM 65


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-PON165 · Stamping and Punching Machine

          SAHINLER - HPM 65 - - 2013 -

          Technical details
          Capacity 65 T︱Punch unit - mm︱Round 26 mm ø︱Throat depth 625 mm︱
          Brand Sahinler Type HPM 65 Year of make 2013 Capacity 65 T Capacity 20 mm Round 26 mm ø Throat depth 625 mm Stroke adjustment Hydraulic control Machine size (lxwxh) 1.500 x 1.000 mm Machine weight 2.440 kg
            Capacity 65 T
            Punch unit - mm
            Round 26 mm ø
            Throat depth 625 mm
            Description :
            Brand Sahinler
            Type HPM 65
            Year of make 2013
            Capacity 65 T
            Capacity 20 mm
            Round 26 mm ø
            Throat depth 625 mm
            Stroke adjustment
            Hydraulic control
            Machine size (lxwxh) 1.500 x 1.000 mm
            Machine weight 2.440 kg



        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Stamping and Punching Machine TRUMPF TruPunch 5000 + Sheetmaster


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4051622 · Stamping and Punching Machine

          TRUMPF - TruPunch 5000 + Sheetmaster - - 2007 -

          Technical details
          Punching force 220 kN︱sheet thickness - max. 8 mm︱x-axis 3000 mm︱y-axis 1500 mm︱ 3000 pro/min︱Maximal punching stroke rate 1350 pro/min︱workpiece weight 280 kg︱
          Working hours: 84.700 h
            Punching force 220 kN
            sheet thickness - max. 8 mm
            x-axis 3000 mm
            y-axis 1500 mm
            3000 pro/min
            Maximal punching stroke rate 1350 pro/min
            workpiece weight 280 kg
            Description :
            Working hours: 84.700 h




        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Stamping and Punching Machine BOSCHERT Compact 1000 Rotation


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-3255 · Stamping and Punching Machine

          BOSCHERT - Compact 1000 Rotation - - 2005 -

          Technical details
          sheet width 1000 mm︱plate length 2000 mm︱plate thickness 10 mm︱Punching force 280 kN︱max. workpiece weight 200 kg︱max. punching diameter 105 mm︱positioning speed X-Axis 60 m/min︱positioning speed Y-Axis 30 m/min︱ 67 m/min︱Positioning deviation +/- 0,1 mm︱machine weight ab. 10 T︱table-size 2000 x 4000 mm︱
            sheet width 1000 mm
            plate length 2000 mm
            plate thickness 10 mm
            Punching force 280 kN
            max. workpiece weight 200 kg
            max. punching diameter 105 mm
            positioning speed X-Axis 60 m/min
            positioning speed Y-Axis 30 m/min
            67 m/min
            Positioning deviation +/- 0,1 mm
            machine weight ab. 10 T
            table-size 2000 x 4000 mm


        • GWM GmbH
        • Gewerbestr. 2
        • 79639 Grenzach-Wyhlen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Stamping and Punching Machine TRUMPF TruMatic 5000R


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4051712 · Stamping and Punching Machine

          TRUMPF - TruMatic 5000R - - 2002 -

          Technical details
          Punching capacity 220 kN︱plate thickness 8 mm︱working area 3085 x 1650 mm︱ 100 m/min︱ 60 m/min︱traversing speed - simultaneously (X and Y) 116 m/min︱machine weight ab. 17500 kg︱
            Punching capacity 220 kN
            plate thickness 8 mm
            working area 3085 x 1650 mm
            100 m/min
            60 m/min
            traversing speed - simultaneousl. 116 m/min
            machine weight ab. 17500 kg


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Stamping and Punching Machine TRUMPF TruMatic 5000R - 1300


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4051742 · Stamping and Punching Machine

          TRUMPF - TruMatic 5000R - 1300 - - 2002 -

          Technical details
          Punching capacity 220 kN︱plate thickness 8 mm︱working area 2535 x 1280 mm︱no. of strokes 116 Hub/min︱table load capacity 200 kg︱machine weight ab. 13.700 kg︱dimensions 7600 × 6100 × 2400 mm︱
            Punching capacity 220 kN
            plate thickness 8 mm
            working area 2535 x 1280 mm
            no. of strokes 116 Hub/min
            table load capacity 200 kg
            machine weight ab. 13.700 kg
            dimensions 7600 × 6100 × 2400 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Stamping and Punching Machine TRUMPF TruPunch 5000 (S01M)


          • Broziat GmbH
          • Vorwerker Str. 62a-64
          • 23554 Lübeck
          • Deutschland

          • +49 451 40 40 19
            +49 451 40 73 93
          • info@Broziat.de
            https://broziat.com
          #2040-100530 · Stamping and Punching Machine

          TRUMPF - TruPunch 5000 (S01M) - - 2001 -

          Technical details
          Movement X without rep. 2535 mm︱Movement Y 1280 mm︱Plate thickness MS. max. 8 mm︱X speed max. 100 m/min︱Y speed max. 60 m/min︱X-Y speed simult, max 116 m/min︱Number of strokes 1200 1/min︱Punch power max. 220 kN︱Punch Ø max. 76,2 mm︱Max. workpiece weight 200 kg︱Tools automatic changing 18 Stk.︱main switch on 122039 Std.︱
          The machine is in good condition. standard equipment: - Stable C-frame - Coordinate guidance with integrated linear magazine, 18 tool positions, automatic tool changer, 3 clamping claws - Automatic parts chute - Drives: Maintenance-free three-phase servo motors - Punching head: Hydraulic mono tool holder, 360° rotation for all tools, automatic tool length compensation, tool spray lubrication, 2nd lubricant container, programmable wiper movement, punching slug suction, - Programmable hold-down device for repositioning with preselectable hold-down force - Programmable logic controller, easy to use, diagnostic functions, Tops 2000 graphics programming, integrated 3.5" floppy disk drive, BNC and RJ 45 network connection - Safety: CE mark, multi-beam light barriers, Quick shutdown hydraulics
            Movement X without rep. 2535 mm
            Movement Y 1280 mm
            Plate thickness MS. max. 8 mm
            X speed max. 100 m/min
            Y speed max. 60 m/min
            X-Y speed simult, max 116 m/min
            Number of strokes 1200 1/min
            Punch power max. 220 kN
            Punch Ø max. 76,2 mm
            Max. workpiece weight 200 kg
            Tools automatic changing 18 Stk.
            main switch on 122039 Std.
            Description :
            The machine is in good condition.


            standard equipment:

            - Stable C-frame
            - Coordinate guidance with integrated linear magazine,
            18 tool positions, automatic tool changer, 3 clamping claws
            - Automatic parts chute
            - Drives: Maintenance-free three-phase servo motors
            - Punching head: Hydraulic mono tool holder, 360° rotation for all tools, automatic tool length compensation, tool spray lubrication, 2nd lubricant container, programmable wiper movement, punching slug suction,
            - Programmable hold-down device for repositioning with preselectable hold-down force
            - Programmable logic controller, easy to use, diagnostic functions, Tops 2000 graphics programming, integrated 3.5" floppy disk drive, BNC and RJ 45 network connection
            - Safety: CE mark, multi-beam light barriers,
            Quick shutdown hydraulics


        • Broziat GmbH
        • Vorwerker Str. 62a-64
        • 23554 Lübeck
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Stamping and Punching Machine IMS HY 80


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-PON173 · Stamping and Punching Machine

          IMS - HY 80 - - 2001 -

          Technical details
          Capacity 80 T︱Punch unit 32 x 19 mm︱Round 45 mm ø︱Strip 450 x 15 mm︱Angle iron 130 x 130 x 13 mm︱Throat depth 350 mm︱blade length 450 mm︱machine 1.800 x 1.300 x 1.900 mm︱
          Brand IMS Type HY80 Year of make 2001 Machine dimensions (L×W×H) 1.800 x 1.300 x 1.900 mm Capacity 80 T Punch unit 32x19 mm Round 45 mm ø Strip 450x15 angle iron 130 x 130 x 13 Throat depth 350 mm Hydraulic control Blade width 450 mm
            Capacity 80 T
            Punch unit 32 x 19 mm
            Round 45 mm ø
            Strip 450 x 15 mm
            Angle iron 130 x 130 x 13 mm
            Throat depth 350 mm
            blade length 450 mm
            machine 1.800 x 1.300 x 1.900 mm
            Description :
            Brand IMS
            Type HY80
            Year of make 2001
            Machine dimensions (L×W×H) 1.800 x 1.300 x 1.900 mm
            Capacity 80 T
            Punch unit 32x19 mm
            Round 45 mm ø
            Strip 450x15
            angle iron 130 x 130 x 13
            Throat depth 350 mm
            Hydraulic control
            Blade width 450 mm


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Stamping and Punching Machine EUROMAC EUROMAC ZX 1000/30


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1920 · Stamping and Punching Machine

          EUROMAC - EUROMAC ZX 1000/30 - - 2001 -

          Technical details
          gebraucht20019647prompt, Zwischenverkauf vItalien32900 €︱ 130 to︱ 1250+N x 1000 mm︱ 1250 mm︱ 1000 mm︱ 40 m/Min︱ 30 m/Min︱ 50 m/Min︱ 30 mm︱ 730 1/Min︱ 300 1/Min︱ 980 mm︱ 4 kW︱ 115 l︱
          With 6-way multitool holder MTE6 (max. Dm. 24 mm) 2 Clamping claws Table with Brushes, table dimension 1970 x 2260 mm Foot pedal 2 pcs. additional single matrix holders PC with Euromac Software Eurowin 8.36 Max. Punching force 300 kN Automatic repositioning up to 10.000 mm Max. Punching diameter for single tool 88,9 mm, Max. Punching diameter Multitool Holder MTE6 Dm. 24 mm Max. Opening the clamping claws 7 mm Transport width: 2350 mm User Manual in english and italian CE declaration available WITH LARGE TOOL PACKAGE several pieces of each of the following dimensions: Round: Dm. 2,5/2,8/3/3,12/3,2/3,5/3,9/4,1/4/4,5/5/5,2/5,5/6/7/7,5/8/8,5/9/9,5/10/10,5/11/11,5/12/12,5/13/13,5/14/15/16/18/19/20/21/23 Square: 10/12/13/15 mm Rectangle: 5x2/20x2/22x4 mm Oblong hole: 10x6,5/12x8,5/12,2x10,7/18x5 mm
            gebraucht
            2001
            9647
            prompt, Zwischenverkauf v
            Italien
            32900 €
            1
            30 to
            1250+N x 1000 mm
            1250 mm
            1000 mm
            40 m/Min
            30 m/Min
            50 m/Min
            30 mm
            730 1/Min
            300 1/Min
            980 mm
            4 kW
            115 l
            Description :
            With 6-way multitool holder MTE6 (max. Dm. 24 mm)
            2 Clamping claws
            Table with Brushes, table dimension 1970 x 2260 mm
            Foot pedal
            2 pcs. additional single matrix holders
            PC with Euromac Software Eurowin 8.36
            Max. Punching force 300 kN
            Automatic repositioning up to 10.000 mm
            Max. Punching diameter for single tool 88,9 mm,
            Max. Punching diameter Multitool Holder MTE6 Dm. 24 mm
            Max. Opening the clamping claws 7 mm
            Transport width: 2350 mm
            User Manual in english and italian
            CE declaration available

            WITH LARGE TOOL PACKAGE
            several pieces of each of the following dimensions:
            Round: Dm. 2,5/2,8/3/3,12/3,2/3,5/3,9/4,1/4/4,5/5/5,2/5,5/6/7/7,5/8/8,5/9/9,5/10/10,5/11/11,5/12/12,5/13/13,5/14/15/16/18/19/20/21/23
            Square: 10/12/13/15 mm
            Rectangle: 5x2/20x2/22x4 mm
            Oblong hole: 10x6,5/12x8,5/12,2x10,7/18x5 mm


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Stamping and Punching Machine Trumpf TC 2000 R


          • Broziat GmbH
          • Vorwerker Str. 62a-64
          • 23554 Lübeck
          • Deutschland

          • +49 451 40 40 19
            +49 451 40 73 93
          • info@Broziat.de
            https://broziat.com
          #2040-100507 · Stamping and Punching Machine

          Trumpf - TC 2000 R - - 2000 -

          Technical details
          108 ︱Movement X without rep. 1270 mm︱Movement Y 1270 mm︱Plate thickness MS. max. 6,4 mm︱X speed max. 90 m/min︱Y speed max. 60 m/min︱X-Y speed simult, max 108 m/min︱Number of strokes 900 1/min︱Punch power max. 180 kN︱Punch Ø max. 76 mm︱Max. workpiece weight 75 kg︱Tools automatic changing 9 Stk.︱
          The machine is in good condition. Standard equipment: - Security light barriers - 9 cartridges and die carrier - 2 sheet clamps - Automatic tool change - Full rotation of all tools - Programmable stripper - function Multitool, - punching slug suction system - part removal chute (200mm x 200mm) with 2 containers - digital, NC-controlled and maintenance free 3-phase motors - automatic repositioning - compensation of tool length variation - deformation capability - network connection RJ 45 - 3,5’’ disk drive - graphic software TOPS 2000 - online diagnose via modem - operators manual Additional equipment: + tapping function + Engraving and beading function + tool spray lubrication + table extension: second positioning pin + Start post
            108
            Movement X without rep. 1270 mm
            Movement Y 1270 mm
            Plate thickness MS. max. 6,4 mm
            X speed max. 90 m/min
            Y speed max. 60 m/min
            X-Y speed simult, max 108 m/min
            Number of strokes 900 1/min
            Punch power max. 180 kN
            Punch Ø max. 76 mm
            Max. workpiece weight 75 kg
            Tools automatic changing 9 Stk.
            Description :
            The machine is in good condition.


            Standard equipment:

            - Security light barriers
            - 9 cartridges and die carrier
            - 2 sheet clamps
            - Automatic tool change
            - Full rotation of all tools
            - Programmable stripper
            - function Multitool,
            - punching slug suction system
            - part removal chute (200mm x 200mm) with 2 containers
            - digital, NC-controlled and maintenance free 3-phase motors
            - automatic repositioning
            - compensation of tool length variation
            - deformation capability
            - network connection RJ 45
            - 3,5’’ disk drive
            - graphic software TOPS 2000
            - online diagnose via modem
            - operators manual

            Additional equipment:

            + tapping function
            + Engraving and beading function
            + tool spray lubrication
            + table extension: second positioning pin
            + Start post


        • Broziat GmbH
        • Vorwerker Str. 62a-64
        • 23554 Lübeck
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Stamping and Punching Machine TRUMPF Trumatic 500 R


          • Broziat GmbH
          • Vorwerker Str. 62a-64
          • 23554 Lübeck
          • Deutschland

          • +49 451 40 40 19
            +49 451 40 73 93
          • info@Broziat.de
            https://broziat.com
          #2040-100506 · Stamping and Punching Machine

          TRUMPF - Trumatic 500 R - - 1999 -

          Technical details
          Movement X without rep. 2585 mm︱Movement Y 1250 mm︱Plate thickness MS. max. 8 mm︱X speed max. 90 m/min︱Y speed max. 60 m/min︱X-Y speed simult, max 108 m/min︱Number of strokes 780 1/min︱Punch power max. 220 kN︱Punch Ø max. 76 mm︱Max. workpiece weight 230 kg︱Tools automatic changing 18 Stk.︱main switch on 37257 Std.︱
          The machine is in good condition. Partially overhauling of the machine, delivery of spare parts free of charge 3 months after installation Surcharge 7.500 €, / time of delivery + 2 weeks Workshopoverhauling of the machine with documentation, delivery of spare parts free of charge 6 months after installation Surcharge 15.000 €, / time of delivery + 3 weeks Standard equipment: - Safety light barriers - 3 sheet clamps - Automatic tool change - Full rotation of all tools - Programmable stripper - Punching slug suction system - Programmable spray tool lubrication - Part removal chute up to 500mm x 500mm - automatic repositioning - Tool length compensation - Scrap box - Graphic aided programming at the control with Bosch Trumagraph - Owners manual
            Movement X without rep. 2585 mm
            Movement Y 1250 mm
            Plate thickness MS. max. 8 mm
            X speed max. 90 m/min
            Y speed max. 60 m/min
            X-Y speed simult, max 108 m/min
            Number of strokes 780 1/min
            Punch power max. 220 kN
            Punch Ø max. 76 mm
            Max. workpiece weight 230 kg
            Tools automatic changing 18 Stk.
            main switch on 37257 Std.
            Description :
            The machine is in good condition.
            Partially overhauling of the machine, delivery of spare parts free of charge 3 months after installation
            Surcharge 7.500 €, / time of delivery + 2 weeks

            Workshopoverhauling of the machine with documentation, delivery of spare parts free of charge 6 months after installation
            Surcharge 15.000 €, / time of delivery + 3 weeks

            Standard equipment:

            - Safety light barriers
            - 3 sheet clamps
            - Automatic tool change
            - Full rotation of all tools
            - Programmable stripper
            - Punching slug suction system
            - Programmable spray tool lubrication
            - Part removal chute up to 500mm x 500mm
            - automatic repositioning
            - Tool length compensation
            - Scrap box
            - Graphic aided programming at the control with Bosch Trumagraph
            - Owners manual


        • Broziat GmbH
        • Vorwerker Str. 62a-64
        • 23554 Lübeck
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Stamping and Punching Machine TRUMPF TruMatic 500


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4051703 · Stamping and Punching Machine

          TRUMPF - TruMatic 500 - - 1998 -

          Technical details
          Punching capacity 220 kN︱working area 2535 x 1280 mm︱plate thickness 8 mm︱machine weight ab. 11.050 kg︱
            Punching capacity 220 kN
            working area 2535 x 1280 mm
            plate thickness 8 mm
            machine weight ab. 11.050 kg


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Stamping and Punching Machine LVD DELTA 1500 LB-TK


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-01025 · Stamping and Punching Machine

          LVD - DELTA 1500 LB-TK - - 1993 - MNC 32000

          Technical details
          sheet width 1550 mm︱plate length 2525 mm︱plate thickness 6,4 mm︱Punching capacity 200 kN︱speed of positioning X 50 m/min︱speed of positioning Y 50 m/mih︱no. of strokes 200 / 400 Hub/min︱control MNC 32000 ︱ATC 22 Pos︱total power requirement 7,5 kW︱weight of the machine ca. 21,3 t︱
            sheet width 1550 mm
            plate length 2525 mm
            plate thickness 6,4 mm
            Punching capacity 200 kN
            speed of positioning X 50 m/min
            speed of positioning Y 50 m/mih
            no. of strokes 200 / 400 Hub/min
            control MNC 32000
            ATC 22 Pos
            total power requirement 7,5 kW
            weight of the machine ca. 21,3 t


        • Hans Klein Werkzeugmaschinenhandel GmbH
        • Im Mühlgut 2-4
        • 77815 Bühl
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Stamping and Punching Machine Häwa 2611


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-PON166X · Stamping and Punching Machine

          Häwa - 2611 - - 1986 -

          Technical details
          Capacity - T︱Punch unit 1 / 6 mm︱Round 6 mm ø︱
          Brand Häwa Type 2611 Year of make 1986 Punch unit 1 / 6 mm Round 6 mm ø angle iron Hydraulic control Machine size (lxwxh) 930 x 930 x 1.150 mm U profile cut
            Capacity - T
            Punch unit 1 / 6 mm
            Round 6 mm ø
            Description :
            Brand Häwa
            Type 2611
            Year of make 1986
            Punch unit 1 / 6 mm
            Round 6 mm ø
            angle iron
            Hydraulic control
            Machine size (lxwxh) 930 x 930 x 1.150 mm

            U profile cut


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Stamping and Punching Machine WIEDEMANN Centrum 1000


          • B&R Service GmbH
          • Esslingerstr.8
          • 73776 Altbach
          • Deutschland

          • +49 (0)7153 99 46 565
            +49 (0)7153 99 46 568
          • info@b-r-service.de
            www.b-r-service.de
          #2025-0223350 · Stamping and Punching Machine

          WIEDEMANN - Centrum 1000 - - 1985 - Fanuc

          Technical details
          sheet width 1000 mm︱plate length 1000/2000 mm︱plate thickness 3 mm︱Punching force [to] 15 to︱Number of working hours h︱control Fanuc ︱punching strokes 200 (/min)︱positioning accuracy 0,1 mm︱Number of tool stations 20 ST.︱Rotating stations 0 ︱Travel speed X/Y 50 m/min︱Max. Table load 50 kg︱Dimensions of machine: ︱Length 4000 mm︱width 3500 mm︱height 2100 mm︱weight 6,3 t︱
            sheet width 1000 mm
            plate length 1000/2000 mm
            plate thickness 3 mm
            Punching force [to] 15 to
            control Fanuc
            punching strokes 200 (/min)
            positioning accuracy 0,1 mm
            Number of tool stations 20 ST.
            Travel speed X/Y 50 m/min
            Max. Table load 50 kg
            Length 4000 mm
            width 3500 mm
            height 2100 mm
            weight 6,3 t


        • B&R Service GmbH
        • Esslingerstr.8
        • 73776 Altbach
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Stamping and Punching Machine AMADA EM-2510 NT


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19922 · Stamping and Punching Machine

          AMADA - EM-2510 NT - - 11/2011 - Amada AMNC-F

          Technical details
          sheet width 1270 mm︱plate length 2500 / 5000 mm︱plate thickness 3,2 mm︱Punching capacity 200 kN︱speed of positioning X 100 m/min︱speed of positioning Y 80 m/min︱no. of strokes 1000 Hub/min︱control Amada AMNC-F ︱tracking travel 360 mm︱workpiece weight 150 kg︱total power requirement 27 kVA︱weight of the machine ca. 18 t︱dimensions of the machine ca. 5,5 x 5,1 x 2,3 m︱
          electric punch Press Type High speed - CNC AMNC touch screen (FANUC 180i PB) - Servo electric drive - 45 Station Turret with 4 Auto indexing units (2G and 2H) Power On : 29580 hours Operating time : 14272 hours
            sheet width 1270 mm
            plate length 2500 / 5000 mm
            plate thickness 3,2 mm
            Punching capacity 200 kN
            speed of positioning X 100 m/min
            speed of positioning Y 80 m/min
            no. of strokes 1000 Hub/min
            control Amada AMNC-F
            tracking travel 360 mm
            workpiece weight 150 kg
            total power requirement 27 kVA
            weight of the machine ca. 18 t
            dimensions of the machine ca. 5,5 x 5,1 x 2,3 m
            Description :
            electric punch Press Type High speed

            - CNC AMNC touch screen (FANUC 180i PB)
            - Servo electric drive
            - 45 Station Turret with 4 Auto indexing units (2G and 2H)

            Power On : 29580 hours
            Operating time : 14272 hours



        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Stamping and Punching Machine SCHUECO SHC 296346


          • Kurt Steiger Werkzeugmaschinen GmbH
          • Flachstr. 11
          • 65197 Wiesbaden
          • Deutschland

          • +49 (0) 611/421047
            +49 (0) 611/421040
          • info@kurt-steiger.de
            www.kurt-steiger.de
          #2043-24914 · Stamping and Punching Machine

          SCHUECO - SHC 296346 - - -

          Technical details
          sheet width mm︱plate length mm︱plate thickness mm︱total power requirement kW︱weight of the machine ca. t︱required space m︱
          At corner joints bars and posts for either glue or nail holes
          Water drain slots in frame and bar profiles
          Recesses for Schüco window handles
          Free die-cut of the Riegelstangennut to window wing profiles inside opening and overlay window profiles

          Cutting force depending on the air pressure (6-8 bar): 0.6 - 0.8 MPa
          Air consumption: 9 l / stroke
          M7q2wrkce
          Space: 620 x 380 x 1250 mm
          Weight: 108 kg
            Description :
            At corner joints bars and posts for either glue or nail holes

            Water drain slots in frame and bar profiles

            Recesses for Schüco window handles

            Free die-cut of the Riegelstangennut to window wing profiles inside opening and overlay window profiles



            Cutting force depending on the air pressure (6-8 bar): 0.6 - 0.8 MPa

            Air consumption: 9 l / stroke

            M7q2wrkce

            Space: 620 x 380 x 1250 mm

            Weight: 108 kg


        • Kurt Steiger Werkzeugmaschinen GmbH
        • Flachstr. 11
        • 65197 Wiesbaden
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Stamping and Punching Machine Weber


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-PON145 · Stamping and Punching Machine

          Weber - - - -

          Technical details
          Capacity 2 x 15 T︱Punch unit - mm︱Round - mm ø︱
          Sleeve punching machine Double punching machine Maximum tube length: 3.000 mm Mold for tube is 30 mm diam. and hole 4 mm ø
            Capacity 2 x 15 T
            Punch unit - mm
            Round - mm ø
            Description :
            Sleeve punching machine
            Double punching machine
            Maximum tube length: 3.000 mm
            Mold for tube is 30 mm diam. and hole 4 mm ø




        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Stamping and Punching Machine Peddinghaus 210 Super 13


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-PON177 · Stamping and Punching Machine

          Peddinghaus - 210 Super 13 - - -

          Technical details
          Capacity - T︱Punch unit - mm︱Round - mm ø︱
          Brand Peddinghaus Machine no PON177 Type 210 Super 13 Machine dimensions (L×W×H) 1.800 x 1.000 x 2.100 mm Capacity 65 T
            Capacity - T
            Punch unit - mm
            Round - mm ø
            Description :
            Brand Peddinghaus
            Machine no PON177
            Type 210 Super 13
            Machine dimensions (L×W×H) 1.800 x 1.000 x 2.100 mm
            Capacity 65 T



        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Stamping and Punching Machine JPons Q35Y-20


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-PON090 · Stamping and Punching Machine

          JPons - Q35Y-20 - - -

          Technical details
          Capacity 100 T︱Punch unit 30 ø x 20; 38 ø x 15 mm︱Round 50 mm ø︱Square 50 mm︱Strip 330 x 20; 480 x 10 mm︱Angle iron 160 x 14 / 80 x 10 mm︱Notching 100 x 52 x 13 mm︱
          Hydraulic operation
            Capacity 100 T
            Punch unit 30 ø x 20; 38 ø x 15 mm
            Round 50 mm ø
            Square 50 mm
            Strip 330 x 20; 480 x 10 mm
            Angle iron 160 x 14 / 80 x 10 mm
            Notching 100 x 52 x 13 mm
            Description :
            Hydraulic operation


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Stamping and Punching Machine Nieland


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-PON156 · Stamping and Punching Machine

          Nieland - - - -

          Technical details
          Round 30 mm ø︱Square 15 mm︱Machine dimensions (lxwxh) - mm︱
            Round 30 mm ø
            Square 15 mm
            Machine dimensions (lxwxh) - mm
            Description :



        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Stamping and Punching Machine Weber LD-300 BS


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-PON136 · Stamping and Punching Machine

          Weber - LD-300 BS - - -

          Technical details
          Capacity 30 T︱Punch unit - mm︱Round - mm ø︱
          Case punching machine 2 set tooling; 1x in machine 1x spare Sleeve punching machine 2 set of tools: 1x in the machine 1x reserve 1 side 2x 19mm 95 mm distance 1 side 1 x 30 mm ø + 32 x 65 mm ø Slot: 85H-H Engine: 11 kW
            Capacity 30 T
            Punch unit - mm
            Round - mm ø
            Description :
            Case punching machine
            2 set tooling;
            1x in machine 1x spare
            Sleeve punching machine
            2 set of tools:
            1x in the machine 1x reserve
            1 side 2x 19mm 95 mm distance
            1 side 1 x 30 mm ø + 32 x 65 mm ø
            Slot: 85H-H
            Engine: 11 kW


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          •   
          •