,
Rete europea di concessionari di macchine per stoccaggio

Bitte einen Suchbegriff eingeben - Inserisci un termine di ricerca
Categoria:
    Produttore:
      macchine:
        trader:

          Plum & Partner Werkzeugmaschinen GmbH - Stockist for used machines

          Machinelist:


          Center Lathe

          used  Center Lathe WAGNER DCS 180 / Digi


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12302 · Center Lathe

          WAGNER - DCS 180 / Digi - - 1987 -

          Technical details
          turning diameter over bed 360 mm︱turning diameter over slide rest 190 mm︱turning length 1000 mm︱centre height 180 mm︱turning dia. in gap 540 mm︱length of gap 320 mm︱spindle bore 46 mm︱spindle taper DIN 55027/Gr. 6 ︱spindle turning speed range 12, 25-1600 U/min︱number of feeds 138 ︱longitudinal feeds: 0,04 - 2,16 mm/U︱cross feeds: 0,02 - 1,08 mm/U︱thread pitch min. in mm 0,45 mm︱thread pitch max. in mm 20 mm︱tailstock quill taper MT 4 ︱quill stroke 130 mm︱total power requirement 2,5/4 kW︱weight of the machine ca. 1,4 t︱dimensions of the machine ca. 2,2 x 0,9 x 1,3 m︱Electric 380 Volt
          Universal lathe from training department with 3 axis digital display, bed gap, bridge, engine brake, foot pedal stop and retrofitted safety devices. Thread: Metric, Inch, Modular, Diametric. The Digital display adds longitudinal movement and upper support and shows it in one display. Machine dealer with own stock of 1600 m².
            turning diameter over bed 360 mm
            turning diameter over slide rest 190 mm
            turning length 1000 mm
            centre height 180 mm
            turning dia. in gap 540 mm
            length of gap 320 mm
            spindle bore 46 mm
            spindle taper DIN 55027/Gr. 6
            spindle turning speed range 12, 25-1600 U/min
            number of feeds 138
            longitudinal feeds: 0,04 - 2,16 mm/U
            cross feeds: 0,02 - 1,08 mm/U
            thread pitch min. in mm 0,45 mm
            thread pitch max. in mm 20 mm
            tailstock quill taper MT 4
            quill stroke 130 mm
            total power requirement 2,5/4 kW
            weight of the machine ca. 1,4 t
            dimensions of the machine ca. 2,2 x 0,9 x 1,3 m
            Description :
            Universal lathe from training department with 3 axis digital display, bed gap,
            bridge, engine brake, foot pedal stop and retrofitted safety devices. Thread:
            Metric, Inch, Modular, Diametric. The Digital display adds longitudinal
            movement and upper support and shows it in one display.
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact
          used  Center Lathe HARRISON M 300


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12237 · Center Lathe

          HARRISON - M 300 - - 1986 -

          Technical details
          turning diameter over bed 325 mm︱turning diameter over slide rest 210 mm︱turning length 700 mm︱spindle bore 38 mm︱spindle turning speed range 12: 40 - 2000 U/min︱bed width 210 mm︱centre height 165 mm︱spindle head D 1-4 Camlock ︱total power requirement 2,2 kW︱weight of the machine ca. 800 kg︱dimensions of the machine ca. 1,6 x 1 x 1,1 m︱Electric 380 Volt ︱3 jaw chuck Forkardt 160 mm ︱Multifix-steel holder ︱Rear chip protect ︱Turret stop ︱Foot brake ︱Machinefeets ︱Coolant tank ︱Video available on our website.
          Lathe make Harrison with turning diameter 325 mm, turning length 700 mm. with hardened guideways, foot brake, chip back wall and lathe chuck as well as Multifix holder. We ask private interested parties to refrain from an inquiry, as we Unfortunately, we cannot meet price expectations + VAT for hobby mechanics. Machine dealer with own stock of 1600 m².
            turning diameter over bed 325 mm
            turning diameter over slide rest 210 mm
            turning length 700 mm
            spindle bore 38 mm
            spindle turning speed range 12: 40 - 2000 U/min
            bed width 210 mm
            centre height 165 mm
            spindle head D 1-4 Camlock
            total power requirement 2,2 kW
            weight of the machine ca. 800 kg
            dimensions of the machine ca. 1,6 x 1 x 1,1 m
            3 jaw chuck Forkardt 160 mm
            Description :
            Lathe make Harrison with turning diameter 325 mm, turning length 700 mm. with
            hardened guideways, foot brake, chip back wall and lathe chuck as well as
            Multifix holder.
            We ask private interested parties to refrain from an inquiry, as we
            Unfortunately, we cannot meet price expectations + VAT for hobby mechanics.
            Machine dealer with own stock of 1600 m².

          3.700 €
          Datasheet
          Request / Contact
          used  Center Lathe COLCHESTER Student 1800 / Digi


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12304 · Center Lathe

          COLCHESTER - Student 1800 / Digi - - 1986 -

          Technical details
          turning diameter over bed 335 mm︱turning diameter over slide rest 210 mm︱turning length 635 mm︱turning dia. in gap 480 mm︱centre height 165 mm︱bed width 230 mm︱spindle bore 40 mm︱turning speeds 16: 22 - 1800 U/m.︱Drive 2,2 kW︱weight of the machine ca. 805 kg︱dimensions of the machine ca. 2 x 0,9 x 1,2 m︱Electric 380 Volt ︱3-axis digital readout ︱3 jaw chuck ︱Chuck protection geschaltet ︱Multifix-steel holder " B " 1 Einsatz ︱Center ︱Hardened guidance pathes ︱fixed and revolving steady ︱Food - Stop
          Universal lathe from training department with 3 axis digital display, bed offset, insert bridge, engine brake, foot pedal stop. The year of manufacture is estimated. We ask private interested parties to refrain from an inquiry, as we Unfortunately, we cannot meet price expectations + VAT for hobby mechanics. Machine dealer with own stock of 1600 m².
            turning diameter over bed 335 mm
            turning diameter over slide rest 210 mm
            turning length 635 mm
            turning dia. in gap 480 mm
            centre height 165 mm
            bed width 230 mm
            spindle bore 40 mm
            turning speeds 16: 22 - 1800 U/m.
            Drive 2,2 kW
            weight of the machine ca. 805 kg
            dimensions of the machine ca. 2 x 0,9 x 1,2 m
            Chuck protection geschaltet
            Multifix-steel holder " B " 1 Einsatz
            Description :
            Universal lathe from training department with 3 axis digital display, bed
            offset, insert bridge, engine brake, foot pedal stop. The year of manufacture
            is estimated.
            We ask private interested parties to refrain from an inquiry, as we
            Unfortunately, we cannot meet price expectations + VAT for hobby mechanics.
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact
          used  Center Lathe WEILER Commodor / Digi


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12301 · Center Lathe

          WEILER - Commodor / Digi - - 1976 -

          Technical details
          turning diameter over bed 380 mm︱turning diameter over slide rest 190 mm︱turning length 1000 mm︱bed width 305 mm︱spindle head DIN 55022 / 6 ︱spindle bore 56 mm︱speeds 9 / 50 - 2000 U/min︱feed longitudinal 0,026 - 0,888 mm/U.︱feeds cross 0,013 - 0,444 mm/U.︱thread - mm pitch 0,35 - 12 mm︱tailstock quill taper MT 4 ︱quill adjustment 150 mm︱total power requirement 4 kW︱weight of the machine ca. 1,45 t︱dimensions of the machine ca. 2,3 x 1 x 1,6 m︱Electric 380 Volt ︱3 jaw chuck Röhm 200 ︱3-axis digital readout RSF ︱Rear chip protect ︱Multifix-steel holder " B " 1 Einsatz
          Universal lathe from training department in good condition with hardened and ground guides, single-disc electric spindle brake, 3-axis digital display, 60 longitudinal and planar feeds and retrofitted safety devices. Machine dealer with own stock of 1600 m².
            turning diameter over bed 380 mm
            turning diameter over slide rest 190 mm
            turning length 1000 mm
            bed width 305 mm
            spindle head DIN 55022 / 6
            spindle bore 56 mm
            speeds 9 / 50 - 2000 U/min
            feed longitudinal 0,026 - 0,888 mm/U.
            feeds cross 0,013 - 0,444 mm/U.
            thread - mm pitch 0,35 - 12 mm
            tailstock quill taper MT 4
            quill adjustment 150 mm
            total power requirement 4 kW
            weight of the machine ca. 1,45 t
            dimensions of the machine ca. 2,3 x 1 x 1,6 m
            3 jaw chuck Röhm 200
            3-axis digital readout RSF
            Multifix-steel holder " B " 1 Einsatz
            Description :
            Universal lathe from training department in good condition with hardened and
            ground guides, single-disc electric spindle brake, 3-axis digital display,
            60 longitudinal and planar feeds and retrofitted safety devices.
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact
          used  Center Lathe MVE BAUART VDF MVE 280/wie VDF V5-2000


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-10914 · Center Lathe

          MVE BAUART VDF - MVE 280/wie VDF V5-2000 - - -

          Technical details
          turning diameter over bed 590 mm︱turning diameter over slide rest 380,350 mm︱turning length 2000 mm︱centre height 280 mm︱bed width 490 mm︱spindle bore 81 mm︱spindle turning speed range 18, von 19-950 U/min︱total power requirement 11 kW︱weight of the machine ca. 4,8 t︱dimensions of the machine ca. 4,51 x 1,76 x 1,58 m︱Electric 380 Volt ︱3-jaw chuck Forkardt F 315 ︱Rapid transfer-steel holder with div. applications ︱Machinelight ︱Cooling equipment ︱Machinefeets ( 6 pieces ) ︱Following peak ︱Condition: ready for operation ︱Video available on our website.
          Universal lathe. Please notice that the MVE 280 is like the VDF V 5 x 2000. Guideways and spindles in good condition. Machine dealer with own stock of 1600 m².
            turning diameter over bed 590 mm
            turning diameter over slide rest 380,350 mm
            turning length 2000 mm
            centre height 280 mm
            bed width 490 mm
            spindle bore 81 mm
            spindle turning speed range 18, von 19-950 U/min
            total power requirement 11 kW
            weight of the machine ca. 4,8 t
            dimensions of the machine ca. 4,51 x 1,76 x 1,58 m
            Description :
            Universal lathe. Please notice that the MVE 280 is like the VDF V 5 x 2000.
            Guideways and spindles in good condition.
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact
          used  Center Lathe WOHLENBERG V 1000


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-11703 · Center Lathe

          WOHLENBERG - V 1000 - - -

          Technical details
          turning diameter over bed 1000 mm︱turning diameter over slide rest 760 mm︱turning length 5100 mm︱centre height 500 mm︱face slide travel 480 mm︱upper slide travel 250 mm︱spindle bore 82 mm︱spindle head DIN 55022 Gr. 11 ︱spindle turning speed range 3,55 - 710 U/min︱feeds - longitudinal 0,063 - 140 mm/U︱feeds - cross 0,032 - 71 mm/U︱rapid travel - longitudinal/face 4,2 / 2,1 m/min︱thread - mm pitch 0,25 - 560 mm︱thread - module 0,063 - 140 ︱thread - inch 112 - 1/20 Gg/"︱max. workpiece weight between centres 4000 kg︱tailstock quill diameter 140 mm︱tailstock quill stroke 315 mm︱taper in tailstock MT 6 ︱total power requirement 22 Kw︱
          Guideways in exellent condition Machine dealer with own stock of 1600 m².
            turning diameter over bed 1000 mm
            turning diameter over slide rest 760 mm
            turning length 5100 mm
            centre height 500 mm
            face slide travel 480 mm
            upper slide travel 250 mm
            spindle bore 82 mm
            spindle head DIN 55022 Gr. 11
            spindle turning speed range 3,55 - 710 U/min
            feeds - longitudinal 0,063 - 140 mm/U
            feeds - cross 0,032 - 71 mm/U
            rapid travel - longitudinal/face 4,2 / 2,1 m/min
            thread - mm pitch 0,25 - 560 mm
            thread - module 0,063 - 140
            thread - inch 112 - 1/20 Gg/"
            max. workpiece weight between ce. 4000 kg
            tailstock quill diameter 140 mm
            tailstock quill stroke 315 mm
            taper in tailstock MT 6
            total power requirement 22 Kw
            Description :
            Guideways in exellent condition
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact

          Gang Drilling Machine

          used  Gang Drilling Machine APOLLO Bimak 35 speedy 2000


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-08212 · Gang Drilling Machine

          APOLLO - Bimak 35 speedy 2000 - - Fabrikneu / new -

          Technical details
          number of spindles 1 ︱bore capacity in steel (diameter) 1 - 35 mm︱bore stroke 140 mm︱size of profile - max. 150 mm︱bore diameter 35 mm︱spindle taper MK 4 ︱column diameter 120 mm︱throat 300 mm︱distance spindlenose - table min./max. 50 / 600 mm︱spindle turning speed range 14 / 45 - 1650 U/min︱impact length 2000 mm︱base plate 420 x 420 mm︱Max. speed ot the feeder 200 mm/sec.︱positioning accuracy auf 3 m +/- 0,2 mm︱air consumption 6 bar︱boring motor 1,5 kW︱Carrying capacity feeder 45 kg︱tube diameter min. 20 mm︱Min. distance hole/end of material clamping side 30 mm︱weight of the machine ca. 700 kg︱
          New controlled SERIES DRILLING MACHINE with 3 automatic spindel feeds in conjunction with the automatic speedy feed system suitable for pipe and profile material. The machine drills automatically holes in the programmed intervals only in a fixed line. The material is clamped with a quick - tensioner (aluminium) on the feed unit. The pneum. vice fixes the workpiece during the drilling phase. The automatic drilling machine drills the hole with autom. feed, the vise solves pneumatically and the it moves to the next memory stored position, the vise clamps and the next cycle begins. The vise can also work outside the center position. Die control with alphanumeric grafic display stores 99 programs with 99 different hole intervals , 99 times repeatable. Max. feed 200 mm / sec. - Individually programmable. Accuracy / - 0.2 mm. The machine can also be manually and semi-automatically used. The feeder is available in various lengths up to 6 m. The speed of the feed material , the drilling feed , the depth and the speed of the drill spindle can be adjusted as needed. Machine dealer with own stock of 1600 m².
            number of spindles 1
            bore capacity in steel (diameter. 1 - 35 mm
            bore stroke 140 mm
            size of profile - max. 150 mm
            bore diameter 35 mm
            spindle taper MK 4
            column diameter 120 mm
            throat 300 mm
            distance spindlenose - table min. 50 / 600 mm
            spindle turning speed range 14 / 45 - 1650 U/min
            impact length 2000 mm
            base plate 420 x 420 mm
            Max. speed ot the feeder 200 mm/sec.
            positioning accuracy auf 3 m +/- 0,2 mm
            air consumption 6 bar
            boring motor 1,5 kW
            Carrying capacity feeder 45 kg
            tube diameter min. 20 mm
            Min. distance hole/end of materi. 30 mm
            weight of the machine ca. 700 kg
            Description :
            New controlled SERIES DRILLING MACHINE with 3 automatic spindel feeds in
            conjunction with the automatic speedy feed system suitable for pipe and
            profile material.
            The machine drills automatically holes in the programmed intervals only in a
            fixed line. The material is clamped with a quick - tensioner (aluminium) on
            the feed unit. The pneum. vice fixes the workpiece during the drilling phase.
            The automatic drilling machine drills the hole with autom. feed, the vise solves
            pneumatically and the it moves to the next memory stored position, the
            vise clamps and the next cycle begins. The vise can also work outside the
            center position. Die control with alphanumeric grafic display
            stores 99 programs with 99 different hole intervals , 99 times repeatable.
            Max. feed 200 mm / sec. - Individually programmable.
            Accuracy / - 0.2 mm. The machine can also be manually and semi-automatically
            used. The feeder is available in various lengths up to 6 m. The speed of the
            feed material , the drilling feed , the depth and the speed of the drill
            spindle can be adjusted as needed.
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact

          Machining Center - Universal

          used  Machining Center - Universal HARTKAEMPER AL 50 - 500 / TNC 150


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12283 · Machining Center - Universal

          HARTKAEMPER - AL 50 - 500 / TNC 150 - - 1990 - Heidenhain TNC 150

          Technical details
          x-travel 5000 mm︱y-travel 500 mm︱z-travel 850 mm︱Control Heidenhain TNC 150 ︱spindle taper ISO 40 ︱main drive motor 7,5 kW︱tool changer number of tools 32 ︱clamping surface below angle 5000 x 550 mm︱spindle turning speed - stepless 4000 U/min︱rapid traverse 15 m/min︱weight of the machine ca. 9,5 t︱dimensions of the machine ca. 8,2 x 2,9 x 3,2 m︱transport dimension 8,2 x 2,4 x 2,98 m︱Electric 380 Volt ︱Cooling equipment
          Boring-milling center in bed design, i. H. the stand moves lengthwise, transverse and vertical.
            x-travel 5000 mm
            y-travel 500 mm
            z-travel 850 mm
            Control Heidenhain TNC 150
            spindle taper ISO 40
            main drive motor 7,5 kW
            tool changer number of tools 32
            clamping surface below angle 5000 x 550 mm
            spindle turning speed - stepless 4000 U/min
            rapid traverse 15 m/min
            weight of the machine ca. 9,5 t
            dimensions of the machine ca. 8,2 x 2,9 x 3,2 m
            transport dimension 8,2 x 2,4 x 2,98 m
            Description :
            Boring-milling center in bed design, i. H. the stand moves lengthwise,
            transverse and vertical.
          Datasheet
          Request / Contact

          Pillar Drilling Machine

          used  Pillar Drilling Machine KAPEMA ZS 40H


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-08411 · Pillar Drilling Machine

          KAPEMA - ZS 40H - - neu -

          Technical details
          bore capacity in steel (diameter) 40 mm︱throat 297 mm︱bore stroke 120 mm︱speeds 8 / 75 - 1600 U/min︱table-size 500 x 460 mm︱spindle taper MK 4 ︱column diameter 115 mm︱spindle feeds: 3 / 0,1 - 0,26 mm/U︱distance spindle /table 715 mm︱distance spindle/base plate 1180 mm︱engine output 1,5 kW︱table rotating 360 Grad︱weight of the machine ca. 335 kg︱dimensions of the machine ca. 0,5 x 0,76 x 1,89 m︱Electric 380 Volt ︱Cooling pump in machine base ︱Machinelight
          Heavy geared boring machine with digital display for speed and drilling depth, hardened gears, thick-walled column, large table and base plate with T-slots, motorized table adjustment, electromagnetic feed engagement by means of snaps on the control lever. Machine not much used from the demonstration area. Machine dealer with own stock of 1600 m².
            bore capacity in steel (diameter. 40 mm
            throat 297 mm
            bore stroke 120 mm
            speeds 8 / 75 - 1600 U/min
            table-size 500 x 460 mm
            spindle taper MK 4
            column diameter 115 mm
            spindle feeds: 3 / 0,1 - 0,26 mm/U
            distance spindle /table 715 mm
            distance spindle/base plate 1180 mm
            engine output 1,5 kW
            table rotating 360 Grad
            weight of the machine ca. 335 kg
            dimensions of the machine ca. 0,5 x 0,76 x 1,89 m
            Description :
            Heavy geared boring machine with digital display for speed and drilling depth,
            hardened gears, thick-walled column, large table and base plate with
            T-slots, motorized table adjustment, electromagnetic feed engagement
            by means of snaps on the control lever. Machine not much used from the
            demonstration area.
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact
          used  Pillar Drilling Machine GILLARDON GB 32 VE


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-08662 · Pillar Drilling Machine

          GILLARDON - GB 32 VE - - neu -

          Technical details
          bore capacity in steel (diameter) 32 mm︱throat 310 mm︱bore stroke 175 mm︱short taper MK 4 ︱feeds 0,1+0,2+0,3+0,4 mm/U︱table-size 570 x 475 mm︱spindle turning speed - stepless 60 - 1600 U/min︱column diameter 130 mm︱distance between table/spindle max. 790 mm︱threading ST 60/GG 20 max. M 27 / M 36 ︱drilling capacity steel/cast iron 40 mm︱distance spindle/base plate 1210 mm︱total power requirement 1,1/1,8 kW︱weight of the machine ca. 450 kg︱range L-W-H 960 x 650 x 1950 mm︱Electric 400 Volt ︱Thread cutting device ︱Stepless turning speed regulation ︱electromagnetic feed ︱Cooling pump in machine base
          Pillar drill with stepless speed control, 2-stage motor, autom. Spindle feed, electromagnetic feed engagement, tapping device, tachometer, prepared for coolant device. Gillardon = German branded product. Machine dealer with own stock of 1600 m².
            bore capacity in steel (diameter. 32 mm
            throat 310 mm
            bore stroke 175 mm
            short taper MK 4
            feeds 0,1+0,2+0,3+0,4 mm/U
            table-size 570 x 475 mm
            spindle turning speed - stepless 60 - 1600 U/min
            column diameter 130 mm
            distance between table/spindle max. 790 mm
            threading ST 60/GG 20 max. M 27 / M 36
            drilling capacity steel/cast iro. 40 mm
            distance spindle/base plate 1210 mm
            total power requirement 1,1/1,8 kW
            weight of the machine ca. 450 kg
            range L-W-H 960 x 650 x 1950 mm
            Description :
            Pillar drill with stepless speed control, 2-stage motor, autom. Spindle feed,
            electromagnetic feed engagement, tapping device, tachometer, prepared for
            coolant device. Gillardon = German branded product.
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact
          used  Pillar Drilling Machine GILLARDON GB 28 VE


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-08660 · Pillar Drilling Machine

          GILLARDON - GB 28 VE - - neu -

          Technical details
          bore capacity in steel (diameter) 28 mm︱throat 295 mm︱bore stroke 175 mm︱short taper MK 3 ︱feeds 0,1+0,2+0,3+0,4 mm/U︱table-size 510 x 425 mm︱spindle turning speed - stepless 60 - 1600 U/min︱column diameter 115 mm︱distance between table/spindle max. 850 mm︱threading ST 60/GG 20 max. M 20 / M 24 ︱drilling capacity steel/cast iron 32 mm︱distance spindle/base plate 1320 mm︱total power requirement 0,7/1,3 kW︱weight of the machine ca. 410 kg︱range L-W-H 960 x 650 x 1950 mm︱Electric 400 Volt ︱Thread cutting device ︱Stepless turning speed regulation ︱Colling unit with separate container ︱electromagnetic feed
          Pillar drill with stepless speed control, 2-stage motor, autom. Spindle feed, electromagnetic feed engagement, tapping device, tachometer, prepared for coolant device. Gillardon = German branded product. Machine dealer with own stock of 1600 m².
            bore capacity in steel (diameter. 28 mm
            throat 295 mm
            bore stroke 175 mm
            short taper MK 3
            feeds 0,1+0,2+0,3+0,4 mm/U
            table-size 510 x 425 mm
            spindle turning speed - stepless 60 - 1600 U/min
            column diameter 115 mm
            distance between table/spindle max. 850 mm
            threading ST 60/GG 20 max. M 20 / M 24
            drilling capacity steel/cast iro. 32 mm
            distance spindle/base plate 1320 mm
            total power requirement 0,7/1,3 kW
            weight of the machine ca. 410 kg
            range L-W-H 960 x 650 x 1950 mm
            Description :
            Pillar drill with stepless speed control, 2-stage motor, autom. Spindle feed,
            electromagnetic feed engagement, tapping device, tachometer, prepared for
            coolant device. Gillardon = German branded product.
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact
          used  Pillar Drilling Machine KAPEMA BM 25


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-08416 · Pillar Drilling Machine

          KAPEMA - BM 25 - - fabrikneu / new -

          Technical details
          bore capacity in steel (diameter) 25 mm︱throat 255 mm︱bore stroke 135 mm︱spindle turning speed range 8, von 105-2900 U/min︱table-size 500 x 350 mm︱column diameter 100 mm︱spindle taper MK 3 ︱total power requirement 0,65 / 0,9 kW︱weight of the machine ca. 190 kg︱dimensions of the machine ca. 0,5 x 0,5 x 1,7 m︱Electric 380 Volt ︱Drill chuck
          New gear machine, 2-stage right/left rotation, height-adjustable drilling head, Construction principle "Arboga - Sweden", maintenance-free gearbox with helical teeth Wheels, drill head and table are adjustable 360 ??degrees around the column,chip protection with electr. Switch, drilling depth indicator, warranty = 12 months. Machine dealer with own stock of 1600 m².
            bore capacity in steel (diameter. 25 mm
            throat 255 mm
            bore stroke 135 mm
            spindle turning speed range 8, von 105-2900 U/min
            table-size 500 x 350 mm
            column diameter 100 mm
            spindle taper MK 3
            total power requirement 0,65 / 0,9 kW
            weight of the machine ca. 190 kg
            dimensions of the machine ca. 0,5 x 0,5 x 1,7 m
            Description :
            New gear machine, 2-stage right/left rotation, height-adjustable drilling head,
            Construction principle "Arboga - Sweden", maintenance-free gearbox with helical
            teeth Wheels, drill head and table are adjustable 360 ??degrees around the
            column,chip protection with electr. Switch, drilling depth indicator, warranty
            = 12 months.

            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact
          used  Pillar Drilling Machine AUDAX 50 A


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-11686 · Pillar Drilling Machine

          AUDAX - 50 A - - 1970 -

          Technical details
          bore capacity in steel (diameter) 50 mm︱throat 300 mm︱bore stroke 200 mm︱spindle taper MK 4 ︱spindle turning speed range 55 - 600 U/min︱table diameter 500 mm︱column diameter 180 mm︱feeds 0,07/0,11/0,16/0,22 mm/U︱total power requirement 1,47 / 1,84 kW︱weight of the machine ca. 500 kg︱dimensions of the machine ca. 1,3 x 0,65 x 2,17 m︱Electric 380 Volt ︱Condition: ready for operation
          Machine dealer with own stock of 1600 m².
            bore capacity in steel (diameter. 50 mm
            throat 300 mm
            bore stroke 200 mm
            spindle taper MK 4
            spindle turning speed range 55 - 600 U/min
            table diameter 500 mm
            column diameter 180 mm
            feeds 0,07/0,11/0,16/0,22 mm/U
            total power requirement 1,47 / 1,84 kW
            weight of the machine ca. 500 kg
            dimensions of the machine ca. 1,3 x 0,65 x 2,17 m
            Description :
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact
          used  Pillar Drilling Machine ALZMETALL AB 3 ESV


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12295 · Pillar Drilling Machine

          ALZMETALL - AB 3 ESV - - -

          Technical details
          bore capacity in steel (diameter) 28 mm︱throat 285 mm︱bore stroke 150 mm︱Column diameter 130 mm︱table-size 620 x 470 mm︱spindle turning speed - stepless 65-1200 U/min︱spindle taper MK 3 ︱feed 0,1 / 0,2 / 0,3 mm/U.︱Drive 1,47 kW︱weight of the machine ca. 380 kg︱dimensions of the machine ca. 0,85 x 0,6 x 1,8 m︱Electric 380 Volt ︱Collets MK
          Machine with infinitely variable speed control, 2-stage gearbox, aut. feed and base plate with flutes.
            bore capacity in steel (diameter. 28 mm
            throat 285 mm
            bore stroke 150 mm
            Column diameter 130 mm
            table-size 620 x 470 mm
            spindle turning speed - stepless 65-1200 U/min
            spindle taper MK 3
            feed 0,1 / 0,2 / 0,3 mm/U.
            Drive 1,47 kW
            weight of the machine ca. 380 kg
            dimensions of the machine ca. 0,85 x 0,6 x 1,8 m
            Description :
            Machine with infinitely variable speed control, 2-stage gearbox, aut. feed and base plate with flutes.
          Datasheet
          Request / Contact

          Portal - Machining Center

          used  Portal - Machining Center WINTER ROUTERMAX ATC 2130 DELUXE


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12294 · Portal - Machining Center

          WINTER - ROUTERMAX ATC 2130 DELUXE - - 2018 - OSAI / Italy

          Technical details
          x-axis 2100 mm︱y-axis 3000 mm︱z-axis 300 mm︱Control OSAI / Italy ︱spindle taper HSK 63 ︱milling spindle HITECO/ Italy 9.5 Kw︱spindle speed: 24.000 UpM︱work speed 20 m/min︱rapid traverse 40 m/min︱tool changer number of tools 8 (mitfahrend) ︱work accuracy 0,05 mm︱Number of working hours ca. 2400 h︱0 27 kw︱operating pressure 6 bar︱Air consumption 60 l/min.︱weight of the machine ca. 2,5 t︱dimensions of the machine ca. 3,8 x 2,9 m︱Electric 400 Volt ︱Software VECTRIC CUT 2D PRO ︱Vacuum table 4 Sektionen
          CNC machining center with only 2400! OPERATING HOURS designed for the materials Wood, plastic and other easily machinable material. The machine base frame and the traveling column are static and dynamic rigid welded constructions. Additional stability is achieved through theribbing within the frame. Due to the high weight of the base stand compensates for the vibrations caused by machining. The traveling column is arranged in the Y - direction on the machine frame. GUIDE SYSTEM: The axes (X-Y-Z) are moved via a linear guide system with a long-term lubrication unit. The maximum travel speed is 40 m/min. DIGITAL DRIVE SYSTEM: The axes (X, Y and Z) position with position control. The high processing quality and repeatability is achieved by YASKAWA/DELTA AC servomotors, backlash- free ball screws and a backlash-free rack and pinion drive in the Y direction. WORKPIECE TENSION: Vacuum grid table with T-slots for clamping coated and uncoated panel materials, ideal for NESTING processing Becker vacuum pump, dry-running, air- cooled, output 129 m3/h. EXTRACTION/ dust extractor Winter CLEANER - 5000, corresponds to H-2 NORM. Technical specifications: - Extraction capacity 5000 m3/h - Motor power 5.5 kW - Speed 3000 rpm - Voltage 400V, 50Hz - Intake manifold diameter 280 mm - Residual dust content 0.2 mg/m3 - Filter material polyester, 2 micron - 32 bag filters 160 x 1000 mm - Filter surface 16.3 m2 - 2 chip bags, each 300 liters - Suction speed 28 m/sec. - mobile - Filter cleaning with vibrating motor including control - Dimensions L= Hardware / Control: The CNC path control is equipped with position-controlled axes. In the axes can be interpolated, with 2 axes each circular interpolation can be performed. The 3rd axis is calculated as a linear axis. The integrated PLC control takes over the control of all machine functions. The industrial PC (Windows Embedded/OSAI) takes over the tasks of operator guidance. The machine can be programmed on the machine or on the PC in the office be made. The machine has CF port for memory card, LAN port for Network connection and USB port for USB stick. SOFTWARE: CAD/CAM software Vectric 2D PRO The ideal software for creating machining programs for everyone Areas of application in the furniture industry, interior design, object furnishing, Joinery, kitchen and bathroom furniture manufacture, etc. Software features: - 32-bit & 64-bit windows based software - Windows 7 - Windows 8 - Windows 10 - G code (DIN 6625) - HPGL (*.PLT) - Simulation - Integrated function for fast flat milling - integrated spindle control - Control code editing function (if required) - View the control codes (G code or HPGL code)
            x-axis 2100 mm
            y-axis 3000 mm
            z-axis 300 mm
            Control OSAI / Italy
            spindle taper HSK 63
            milling spindle HITECO/ Italy 9.5 Kw
            spindle speed: 24.000 UpM
            work speed 20 m/min
            rapid traverse 40 m/min
            tool changer number of tools 8 (mitfahrend)
            work accuracy 0,05 mm
            Number of working hours ca. 2400 h
            0 27 kw
            operating pressure 6 bar
            Air consumption 60 l/min.
            weight of the machine ca. 2,5 t
            dimensions of the machine ca. 3,8 x 2,9 m
            Software VECTRIC CUT 2D PRO
            Vacuum table 4 Sektionen
            Description :
            CNC machining center with only 2400! OPERATING HOURS designed for the
            materials Wood, plastic and other easily machinable material.
            The machine base frame and the traveling column are static and dynamic rigid
            welded constructions. Additional stability is achieved through theribbing
            within the frame. Due to the high weight of the base stand compensates for the
            vibrations caused by machining. The traveling column is arranged in the Y -
            direction on the machine frame.
            GUIDE SYSTEM:
            The axes (X-Y-Z) are moved via a linear guide system with a long-term
            lubrication unit. The maximum travel speed is 40 m/min.
            DIGITAL DRIVE SYSTEM:
            The axes (X, Y and Z) position with position control. The high processing
            quality and repeatability is achieved by YASKAWA/DELTA AC servomotors, backlash-
            free ball screws and a backlash-free rack and pinion drive in the Y direction.
            WORKPIECE TENSION:
            Vacuum grid table with T-slots for clamping coated and uncoated panel
            materials, ideal for NESTING processing Becker vacuum pump, dry-running, air-
            cooled, output 129 m3/h.
            EXTRACTION/ dust extractor Winter CLEANER - 5000, corresponds to H-2 NORM.
            Technical specifications:
            - Extraction capacity 5000 m3/h
            - Motor power 5.5 kW
            - Speed 3000 rpm
            - Voltage 400V, 50Hz
            - Intake manifold diameter 280 mm
            - Residual dust content 0.2 mg/m3
            - Filter material polyester, 2 micron
            - 32 bag filters 160 x 1000 mm
            - Filter surface 16.3 m2
            - 2 chip bags, each 300 liters
            - Suction speed 28 m/sec.
            - mobile
            - Filter cleaning with vibrating motor including control
            - Dimensions L=
            Hardware / Control:
            The CNC path control is equipped with position-controlled axes.
            In the axes can be interpolated, with 2 axes each
            circular interpolation can be performed.
            The 3rd axis is calculated as a linear axis. The integrated PLC control
            takes over the control of all machine functions.
            The industrial PC (Windows Embedded/OSAI) takes over the tasks of
            operator guidance.
            The machine can be programmed on the machine or on the PC in the office
            be made.
            The machine has CF port for memory card, LAN port for
            Network connection and USB port for USB stick.
            SOFTWARE:
            CAD/CAM software Vectric 2D PRO
            The ideal software for creating machining programs for everyone
            Areas of application in the furniture industry, interior design, object
            furnishing,
            Joinery, kitchen and bathroom furniture manufacture, etc.
            Software features:
            - 32-bit & 64-bit windows based software
            - Windows 7
            - Windows 8
            - Windows 10
            - G code (DIN 6625)
            - HPGL (*.PLT)
            - Simulation
            - Integrated function for fast flat milling
            - integrated spindle control
            - Control code editing function (if required)
            - View the control codes (G code or HPGL code)
          Datasheet
          Request / Contact

          Rapid Radial Drilling Machine

          used  Rapid Radial Drilling Machine GILLARDON GSR 32 VE-SL


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-08664 · Rapid Radial Drilling Machine

          GILLARDON - GSR 32 VE-SL - - neu -

          Technical details
          bore capacity in steel (diameter) 32 mm︱arm length 1220 mm︱workpiece height max. 600 mm︱bore capacity in cast iron 40 mm︱short taper MK 4 ︱throat min. 210 mm︱table surface area 1200 x 510 mm︱distance spindle /table 380 - 680 mm︱distance spindle/base plate 1075- 1375 mm mm︱quill stroke 200 mm︱spindle feeds: 0,08-0,1-0,2-0,3 ︱spindle turning speed - stepless 80 - 2000 U/min︱dimensions 1,2 x 1,71 x 2,5 m︱total power requirement 2/2,4 kW︱weight of the machine ca. 1,7 t︱Electric 400 Volt ︱Thread cutting device ︱Stepless turning speed regulation ︱Protection guard plexi ︱Electromagnetic feed engagement
          Machine dealer with own stock of 1600 m².
            bore capacity in steel (diameter. 32 mm
            arm length 1220 mm
            workpiece height max. 600 mm
            bore capacity in cast iron 40 mm
            short taper MK 4
            throat min. 210 mm
            table surface area 1200 x 510 mm
            distance spindle /table 380 - 680 mm
            distance spindle/base plate 1075- 1375 mm mm
            quill stroke 200 mm
            spindle feeds: 0,08-0,1-0,2-0,3
            spindle turning speed - stepless 80 - 2000 U/min
            dimensions 1,2 x 1,71 x 2,5 m
            total power requirement 2/2,4 kW
            weight of the machine ca. 1,7 t
            Description :
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact

          Bed Type Milling Machine - Vertical

          used  Bed Type Milling Machine - Vertical HARTKAEMPER AL 50 - 500 / TNC 150


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12288 · Bed Type Milling Machine - Vertical

          HARTKAEMPER - AL 50 - 500 / TNC 150 - - 1990 - Heidenhain TNC 150

          Technical details
          x-travel 5000 mm︱y-travel 500 mm︱z-travel 850 mm︱control Heidenhain TNC 150 ︱spindle taper ISO 40 ︱main drive motor 7,5 kW︱tool changer number of tools 32 ︱clamping surface below angle 5000 x 550 mm︱spindle turning speed - stepless 4000 U/min︱rapid traverse 15 m/min︱total power requirement kW︱weight of the machine ca. 9,5 t︱dimensions of the machine ca. 8,2 x 2,9 x 3,2 m︱transport dimension 8,2 x 2,4 x 2,98 m︱Electric 380 Volt ︱Cooling equipment ︱Condition: ready for operation ︱Video(s) available on our website.
          Boring-milling center in bed design, i. H. the stand moves lengthwise, transverse and vertical, especially suitable for drilling, but also for light milling work.
            x-travel 5000 mm
            y-travel 500 mm
            z-travel 850 mm
            control Heidenhain TNC 150
            spindle taper ISO 40
            main drive motor 7,5 kW
            tool changer number of tools 32
            clamping surface below angle 5000 x 550 mm
            spindle turning speed - stepless 4000 U/min
            rapid traverse 15 m/min
            weight of the machine ca. 9,5 t
            dimensions of the machine ca. 8,2 x 2,9 x 3,2 m
            transport dimension 8,2 x 2,4 x 2,98 m
            Description :
            Boring-milling center in bed design, i. H. the stand moves lengthwise,
            transverse and vertical, especially suitable for drilling, but also for light
            milling work.
          Datasheet
          Request / Contact

          milling machining centers - vertical

          used  milling machining centers - vertical STROJTOS VMC 40


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12110 · milling machining centers - vertical

          STROJTOS - VMC 40 - - 2003 - Heidenhain TNC 310

          Technical details
          x-travel 450 mm︱y-travel 400 mm︱z-travel 400 mm︱control Heidenhain TNC 310 ︱distance spindle nose and table min. 100 mm︱table height over floor 810 mm︱table surface area 400 x 900 mm︱no. of flutes 5 je 14 mm ︱work piece dimensions max. 450 x 400 x 300 mm︱workpiece weight max. 350 kg︱turning speeds: 9000 U/min︱power requirement 7,5 / 8,2 kW︱spindle cone ISO 40 DIN 69871 ︱spindle diameter in front bearing 60 mm︱tool numbers 12 ︱diameter of tools max. 80 mm︱tool length - max. 200 mm︱weight of tools max. 6 kg︱tool changing time 4 sec︱feed range x y z 1 - 20 000 mm/min.︱
          - INDRAMAT axis drives in X, Y, Z and S - SCHNEEBERGER roller guide - Cabin roof fixed - anchoring material - machine documentation You find a video on our homepage. Machine dealer with own stock of 1600 m²
            x-travel 450 mm
            y-travel 400 mm
            z-travel 400 mm
            control Heidenhain TNC 310
            distance spindle nose and table min. 100 mm
            table height over floor 810 mm
            table surface area 400 x 900 mm
            no. of flutes 5 je 14 mm
            work piece dimensions max. 450 x 400 x 300 mm
            workpiece weight max. 350 kg
            turning speeds: 9000 U/min
            power requirement 7,5 / 8,2 kW
            spindle cone ISO 40 DIN 69871
            spindle diameter in front bearin. 60 mm
            tool numbers 12
            diameter of tools max. 80 mm
            tool length - max. 200 mm
            weight of tools max. 6 kg
            tool changing time 4 sec
            feed range x y z 1 - 20 000 mm/min.
            Description :
            - INDRAMAT axis drives in X, Y, Z and S
            - SCHNEEBERGER roller guide
            - Cabin roof fixed
            - anchoring material
            - machine documentation
            You find a video on our homepage.
            Machine dealer with own stock of 1600 m²
          Datasheet
          Request / Contact

          Tool Room Milling Machine - Universal

          used  Tool Room Milling Machine - Universal EMCO FB-4 / Digi + NC-Zyklus


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12247 · Tool Room Milling Machine - Universal

          EMCO - FB-4 / Digi + NC-Zyklus - - 1995 - Prototrak MX 2

          Technical details
          x-travel 450 mm︱y-travel 300 mm︱z-travel 350 mm︱table surface area 800 x 400 mm︱workpiece weight max. 300 kg︱tool taper ISO 40 ︱turning speeds 18: 50 - 2500 U/min︱quill stroke 100 mm︱feeds X / Y 8 - 400 mm/min.︱feeds Z-axis 4 - 200 mm/min︱rapid traverse x / y axis 2400 mm/min︱rapid traverse Z-axis 1200 mm/min︱control Prototrak MX 2 ︱weight of the machine ca. 1,5 t︱drive motor 3,2 kW︱range L-W-H 1,5 x 1,5 x 1,7 m︱Electric 380 Volt ︱Digital readout ︱Vertical milling head swivelling +quill adjustment abklappbar ︱Cooling equipment
          Universal tool milling machine from a maintenance workshop with control Prototrak MX 2. This is suitable for manual and automatic processing. It follows pre-programmed paths x + y, the operator only has to set the milling depth "z" set manually. Machining cycles such as hole circles + rows, program pocket functions,circular arcs, frame functions, etc. Machine dealer with own stock of 1600 m².
            x-travel 450 mm
            y-travel 300 mm
            z-travel 350 mm
            table surface area 800 x 400 mm
            workpiece weight max. 300 kg
            tool taper ISO 40
            turning speeds 18: 50 - 2500 U/min
            quill stroke 100 mm
            feeds X / Y 8 - 400 mm/min.
            feeds Z-axis 4 - 200 mm/min
            rapid traverse x / y axis 2400 mm/min
            rapid traverse Z-axis 1200 mm/min
            control Prototrak MX 2
            weight of the machine ca. 1,5 t
            drive motor 3,2 kW
            range L-W-H 1,5 x 1,5 x 1,7 m
            Vertical milling head swivelling. abklappbar
            Description :
            Universal tool milling machine from a maintenance workshop with control
            Prototrak MX 2. This is suitable for manual and automatic processing.
            It follows pre-programmed paths x + y, the operator only has to set the milling
            depth "z" set manually. Machining cycles such as hole circles + rows, program
            pocket functions,circular arcs, frame functions, etc.
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact
          used  Tool Room Milling Machine - Universal ORADEA FUS 22 / Digi Heidenhain


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12233 · Tool Room Milling Machine - Universal

          ORADEA - FUS 22 / Digi Heidenhain - - 1986 -

          Technical details
          x-travel 300 mm︱y-travel 170 mm︱z-travel 300 mm︱taper in main spindle ISO 40 ︱table surface area 670 x 320 mm︱turning speeds 12: 63 - 1250 U/min︱feeds 12: 12,5 - 250 mm/min︱weight 800 kg︱total power requirement 1,1/1,9 kW︱dimensions of the machine ca. m︱range L-W-H 1,16 x 1,1 x 1,55 m︱Electric 380 Volt ︱Cooloing pump ︱3-axis digital readout Heidenhain ︱Fixed working table ︱Vertical milling head swivelling +quill adjustment ︱chip pan ︱Universal table swivel- and tilting ︱Condition: ready for operation ︱Video available on our website.
          Universal tool milling machine from a training workshop, autom. feeds in x + z axis, y axis manually. Machine dealer with own stock of 1600 m².
            x-travel 300 mm
            y-travel 170 mm
            z-travel 300 mm
            taper in main spindle ISO 40
            table surface area 670 x 320 mm
            turning speeds 12: 63 - 1250 U/min
            feeds 12: 12,5 - 250 mm/min
            weight 800 kg
            total power requirement 1,1/1,9 kW
            range L-W-H 1,16 x 1,1 x 1,55 m
            3-axis digital readout Heidenhain
            Description :
            Universal tool milling machine from a training workshop, autom. feeds
            in x + z axis, y axis manually.
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact
          used  Tool Room Milling Machine - Universal DECKEL FP 1 Aktiv / TNC 113


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12186 · Tool Room Milling Machine - Universal

          DECKEL - FP 1 Aktiv / TNC 113 - - 1979 - Heidenhain TNC 113

          Technical details
          x-travel 300 mm︱y-travel 160 mm︱z-travel 340 mm︱spindle taper ISO 40 ︱spindle turning speed range 40 - 2000 U/min︱feeds -stepless- 5 - 500 mm/min︱rapid traverse 1200 mm/min︱creep feed 4 mm/min︱control Heidenhain TNC 113 ︱total power requirement 1,6/2 kW︱weight of the machine ca. 570 kg︱dimensions of the machine ca. 1,2 x 1 x 1,75 m︱Electric 380 Volt ︱Switch gear cabinet ( separate ) ︱Angle table ( fixed ) 600 x 210 mm︱Taper ︱Opposite bearing for horizontal milling unit ︱Bellows with slats of aluminium ︱Video available on our website. ︱Condition: ready for operation
          with active digital display "Heidenhain TNC 113", for automatic retraction of preselected slide positions in absolute and incremental travel, autom. feeds stepless in x + z axis, sliding upper arm 100 mm. Machine dealer with own stock of 1600 m².
            x-travel 300 mm
            y-travel 160 mm
            z-travel 340 mm
            spindle taper ISO 40
            spindle turning speed range 40 - 2000 U/min
            feeds -stepless- 5 - 500 mm/min
            rapid traverse 1200 mm/min
            creep feed 4 mm/min
            control Heidenhain TNC 113
            total power requirement 1,6/2 kW
            weight of the machine ca. 570 kg
            dimensions of the machine ca. 1,2 x 1 x 1,75 m
            Angle table ( fixed ) 600 x 210 mm
            Description :
            with active digital display "Heidenhain TNC 113", for automatic retraction of
            preselected slide positions in absolute and incremental travel, autom. feeds
            stepless in x + z axis, sliding upper arm 100 mm.
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact
          used  Tool Room Milling Machine - Universal DECKEL FP 2 Aktiv / TNC 113


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12280 · Tool Room Milling Machine - Universal

          DECKEL - FP 2 Aktiv / TNC 113 - - 1979 - Heidenhain TNC 113

          Technical details
          x-travel 400 mm︱y-travel 220 mm︱z-travel 400 mm︱spindle taper ISO 40 ︱spindle turning speed range 25 - 2500 U/min︱feeds -stepless- 5 - 500 mm/min︱rapid traverse 1200 mm/min︱creep feed 4 mm/min︱control Heidenhain TNC 113 ︱total power requirement 4,4 kW︱weight of the machine ca. 1500 kg︱dimensions of the machine ca. 1,6 x 1,2 x 1,8 m︱Electric 380 Volt ︱Switch gear cabinet ( separate ) ︱Angle table ( fixed ) 700 x 330 mm︱Taper diverse ︱Bellows with slats of aluminium ︱Protection cabin ︱bottom tray ︱Machinefeets
          with active digital display "Heidenhain TNC 113", for automatic retraction of preselected slide positions in absolute and incremental travel, autom. feeds stepless in x + z axis, sliding upper arm 100 mm. Machine dealer with own stock of 1600 m².
            x-travel 400 mm
            y-travel 220 mm
            z-travel 400 mm
            spindle taper ISO 40
            spindle turning speed range 25 - 2500 U/min
            feeds -stepless- 5 - 500 mm/min
            rapid traverse 1200 mm/min
            creep feed 4 mm/min
            control Heidenhain TNC 113
            total power requirement 4,4 kW
            weight of the machine ca. 1500 kg
            dimensions of the machine ca. 1,6 x 1,2 x 1,8 m
            Angle table ( fixed ) 700 x 330 mm
            Taper diverse
            Description :
            with active digital display "Heidenhain TNC 113", for automatic retraction of
            preselected slide positions in absolute and incremental travel, autom. feeds
            stepless in x + z axis, sliding upper arm 100 mm.
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact

          Universal Milling Machine

          used  Universal Milling Machine KNUTH UWF 1 / Digi


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12285 · Universal Milling Machine

          KNUTH - UWF 1 / Digi - - 2005 -

          Technical details
          x-travel 600 mm︱y-travel 300 mm︱z-travel 440 mm︱table-size 1120 x 260 mm︱spindle taper ISO 40 ︱spindle turning speed range 35 - 1600 U/min︱feed range longitudinal 24 - 720 mm/min.︱table load 350 kg︱head swivability 360 °︱distance spindle nose and table 0 - 440 mm︱distance horizontal spindle / table 60 - 500 mm︱total power requirement 2,2 kW︱weight of the machine ca. 1,36 t︱dimensions of the machine ca. 1,66 x 1,33 x 1,73 m︱Electric 380 Volt ︱Machinelight ︱Univ. milling head ISO 40 ︱3-axis digital readout ︱Cooling equipment ︱CE signed
          Universal milling machine with 200 mm sliding upper arm lengthens the machine working area in y to 500 mm, feeds and rapid traverse in longitudinal, transverse and vertical feed is manual. Machine dealer with own stock of 1600 m².
            x-travel 600 mm
            y-travel 300 mm
            z-travel 440 mm
            table-size 1120 x 260 mm
            spindle taper ISO 40
            spindle turning speed range 35 - 1600 U/min
            feed range longitudinal 24 - 720 mm/min.
            table load 350 kg
            head swivability 360 °
            distance spindle nose and table 0 - 440 mm
            distance horizontal spindle / ta. 60 - 500 mm
            total power requirement 2,2 kW
            weight of the machine ca. 1,36 t
            dimensions of the machine ca. 1,66 x 1,33 x 1,73 m
            Univ. milling head ISO 40
            Description :
            Universal milling machine with 200 mm sliding upper arm lengthens the
            machine working area in y to 500 mm, feeds and rapid traverse in longitudinal,
            transverse and vertical feed is manual.
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact
          used  Universal Milling Machine ENSHU Mod. F - HF / Digi


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12128 · Universal Milling Machine

          ENSHU - Mod. F - HF / Digi - - 1978 -

          Technical details
          x-travel 800 mm︱y-travel 240 mm︱z-travel 410 mm︱spindle taper ISO 50 ︱spindle turning speed range 12 / 56 - 1503 U/min︱feeds -stepless- 20 - 1000 mm/min︱table-size 1600 x 300 mm︱rapid traverse 2250 mm/min︱distance spindle center to column 300 mm︱drive milling spindle 3,7 kW︱weight of the machine ca. 2,4 t︱dimensions of the machine ca. 2,3 x 2,15 x 1,9 m︱Electric 380 Volt ︱Vertical milling head swiveling + removable ISO 50 ︱3-axis digital readout ELESTA Visulesta 200 ︱Div. receivings ︱Central lubrication ︱Condition: ready for operation ︱Video available on our website.
          Universal milling machine with automatic, stepless feeds and rapid traverses in all three working directions, synchronous milling device, various accessories, base as machine elevation with machine feet. Japanese branded product. The year of construction is estimated! Hydraulic vice available for an additional charge. Machine dealer with own stock of 1600 m².
            x-travel 800 mm
            y-travel 240 mm
            z-travel 410 mm
            spindle taper ISO 50
            spindle turning speed range 12 / 56 - 1503 U/min
            feeds -stepless- 20 - 1000 mm/min
            table-size 1600 x 300 mm
            rapid traverse 2250 mm/min
            distance spindle center to colum. 300 mm
            drive milling spindle 3,7 kW
            weight of the machine ca. 2,4 t
            dimensions of the machine ca. 2,3 x 2,15 x 1,9 m
            Vertical milling head swiveling . ISO 50
            3-axis digital readout ELESTA Visulesta 200
            Description :
            Universal milling machine with automatic, stepless feeds and rapid traverses in
            all three working directions, synchronous milling device, various accessories,
            base as machine elevation with machine feet.
            Japanese branded product. The year of construction is estimated!
            Hydraulic vice available for an additional charge.
            Machine dealer with own stock of 1600 m².
          4.200 €
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   

            Profilo del commerciante: Plum & Partner Werkzeugmaschinen GmbH

          Contatta Trader



            Plum & Partner Werkzeugmaschinen GmbH
           Angolo di strada 32
            32257 - Bunde
            Germania
            + 49 05223 574444 "> + 49 05223 574444
            +49 5223188330
            info@plum-maschinen.de
            www.plum-maschinen.de

          Profilo di Trader




          Plum  &  Partner Werkzeugmaschinen GmbH   32257 - Bünde Winkelstraße 32 Deutschland
          Plum & Partner Werkzeugmaschinen GmbH

          Winkelstraße 32



          Contact Trader


            Plum & Partner Werkzeugmaschinen GmbH
           Winkelstraße 32
            32257 - Bünde
            Deutschland
            +49 05223 574444
            +49 5223188330
            info@plum-maschinen.de
            www.plum-maschinen.de
            Contact person:
          Herr Andreas Plum +49 5223574444
          Herr Werner H. Kloske +49 5223574444

           




          Machine category


          · Abkantpresse - hydraulisch · Abkantwerkzeuge · Alu-Kreissäge · Aufspannplatte · Aufspanntisch · Ausdrehkopf · Bandsäge - Automatisch · Bandsäge - horizontal · Bandsäge - Vertikal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Bettfräsmaschine - Vertikal · Bohr- und Fräszentrum · Bohranlage · Bohrer · Bohrerschleifmaschine · Brennschneidemaschine · Bügelsäge · Doppelschleifbock · Dornrohrbiegemaschine · Dreiwalzen - Blechbiegemaschine · Entgratmaschine · Fräseinrichtung · Fräsmaschine - Universal · Frässtichel-Schleifmaschine · Futter · Gewindebohrmaschine - Vertikal · Handhebel-Schere · Handspindelpresse · Hochgeschwindigkeits Bearbeitungszentrum · Hydraulikaggregat · Härteanlage - Induktion · Härteprüfer · Kaltkreissäge · Koordinatenschleifmaschine · Koordinatentisch · Laserschneidmaschine · Leichtmetallkreissäge · Leit- und Zugspindeldrehmaschine · Lochstanze · Magnetspannplatte · Mehrspindel-Bohrkopf · Meßmittel · Nutenziehmaschine · Planscheibe · Portal - Bearbeitungszentrum · Positionierer · Profilstahlschere - Kombiniert · Radialbohrmaschine · Reihenbohrmaschine · Richtplatte · Ring- Profil- Biegemaschine · Rohrbiegemaschine · Rollengang · Scheuertrommel (Rollentrommel) · Schleifmaschinenzubehör · Schleifscheibe · Schnellradialbohrmaschine · Schraubstock · Schrumpfgerät / Induktionsgerät · Schweißdrehtisch - rund · Schweißroboter · Schwenkbiegemaschine · Schwingfußelement · Senkerodiermaschine · Säulenbohrmaschine · Tafelschere - hydraulisch · Tafelschere - mechanisch · Teilapparat · Tellerschleifmaschine · Vierwalzen - Blechbiegemaschine · Werkstattpresse - hydraulisch · Werkzeugfräsmaschine - Universal · Werkzeughalter · Werkzeugwechselwagen · Würfeltisch ·