Rete europea di concessionari di macchine per stoccaggio

Bitte einen Suchbegriff eingeben - Inserisci un termine di ricerca
Categoria:
    Produttore:
      macchine:
        trader:

          Cutting machines

          Machinelist: Cutting machines


          Cutting machines

          used Cutting Cutting machines Pugno Plattenschneidmaschine  C926


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-H201101 · Cutting machines

          Pugno - Plattenschneidmaschine C926 - - n.b. -

          Technical details
          cross-section width: 800 mm︱cross-section heigth: 15 mm︱feed: ab ca. 5 mm︱speed of feed: m/min︱cuts max.: Schnitte/m︱
          condition: used, overhauled Specification: Panel cutting machine - overhauled with CE - Section width max.approx.: 800 mm - Section height max.: 15 mm, depending on the hardness of the rubber sheets - Cutting length from approx.: 5 mm (depending on material) - cutting force approx.: 10 tons - Connected load approx.: 1.8 kW - Painting: green - Operating voltage: 3 x 400V, 50Hz, N, PE - Dimensions approx.: 1,200 x 1,450 x 1,950 mm - Safety devices according to current standards; - New on-board system machine; - New control cabinet with PLC system Siemens S7-1200; - CE marking; - Instructions for use and maintenance in English or German language
            cross-section width: 800 mm
            cross-section heigth: 15 mm
            feed: ab ca. 5 mm
            Description :
            condition: used, overhauled

            Specification: Panel cutting machine -
            overhauled with CE

            - Section width max.approx.: 800 mm
            - Section height max.: 15 mm, depending on the hardness
            of the rubber sheets
            - Cutting length from approx.: 5 mm (depending on material)
            - cutting force approx.: 10 tons
            - Connected load approx.: 1.8 kW
            - Painting: green
            - Operating voltage: 3 x 400V, 50Hz, N, PE
            - Dimensions approx.: 1,200 x 1,450 x 1,950 mm
            - Safety devices according to current standards;
            - New on-board system machine;
            - New control cabinet with PLC system Siemens S7-1200;
            - CE marking;
            - Instructions for use and maintenance in English or German language



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Cutting Cutting machines COTTA Spalter, Gummiballen


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-H211002 · Cutting machines

          COTTA - Spalter, Gummiballen - - n.b. -

          Technical details
          cross-section width: 700 mm︱cross-section heigth: 500 mm︱feed: -- mm︱
          Condition: used, overhauled Specification: splitter for rubber bales - overhauled with CE - cross section width max.ca.: 700 mm - cross section height max. approx.: 500 mm - cutting force approx.: 10 tons - AC motor: 4 kW, 400 V, 50 Hz - Infeed roller conveyor for product transport - Machine stands on a raised pedestal - Two-hand safety control for driving the blade movement - Safety guard according to current standards - New control cabinet - New on-board system machine - Operating and maintenance manual in English - CE marking - Paintwork: according to customer requirements - Refurbished with 1 year warranty - CE marking; Option: - Output roller conveyor new
            cross-section width: 700 mm
            cross-section heigth: 500 mm
            feed: -- mm
            Description :
            Condition: used, overhauled

            Specification: splitter for rubber bales - overhauled with CE

            - cross section width max.ca.: 700 mm
            - cross section height max. approx.: 500 mm
            - cutting force approx.: 10 tons
            - AC motor: 4 kW, 400 V, 50 Hz
            - Infeed roller conveyor for product transport
            - Machine stands on a raised pedestal
            - Two-hand safety control for driving the blade movement
            - Safety guard according to current standards
            - New control cabinet
            - New on-board system machine
            - Operating and maintenance manual in English
            - CE marking
            - Paintwork: according to customer requirements
            - Refurbished with 1 year warranty
            - CE marking;

            Option:
            - Output roller conveyor new



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Cutting Cutting machines HANS VON DER HEYDE Mitlaufende Saege MA Move


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-H200705 · Cutting machines

          HANS VON DER HEYDE - Mitlaufende Saege MA Move - - 2016/17 -

          Technical details
          cross-section width: 100 mm︱cross-section heigth: 50 mm︱feed: 10 - 999.999,9 mm︱speed of feed: 1 - 50 m/min︱
            cross-section width: 100 mm
            cross-section heigth: 50 mm
            feed: 10 - 999.999,9 mm
            speed of feed: 1 - 50 m/min


        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Cutting Cutting machines Haeuser Vorrichtungsbau Stanzvorrichtung WABS


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-H190701 · Cutting machines

          Haeuser Vorrichtungsbau - Stanzvorrichtung WABS - - 2016 -

          Technical details
          cross-section width: 90 mm︱cross-section heigth: 35 mm︱feed: 1.600 mm︱
            cross-section width: 90 mm
            cross-section heigth: 35 mm
            feed: 1.600 mm


        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Cutting Cutting machines HANS VON DER HEYDE Mitlaufende Saege MA Move


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-H200704 · Cutting machines

          HANS VON DER HEYDE - Mitlaufende Saege MA Move - - 2015 -

          Technical details
          cross-section width: 100 mm︱cross-section heigth: 50 mm︱feed: 10 - 999.999,9 mm︱speed of feed: 1 - 50 m/min︱
            cross-section width: 100 mm
            cross-section heigth: 50 mm
            feed: 10 - 999.999,9 mm
            speed of feed: 1 - 50 m/min


        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Cutting Cutting machines BASTON TSQ-P-503-100


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-H180601 · Cutting machines

          BASTON - TSQ-P-503-100 - - 2011 -

          Technical details
          cross-section width: -- mm︱cross-section heigth: -- mm︱feed: -- mm︱speed of feed: 0,4 - 20 m/min︱
            cross-section width: -- mm
            cross-section heigth: -- mm
            feed: -- mm
            speed of feed: 0,4 - 20 m/min


        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Cutting Cutting machines METZNER MASCHINENBAU Ablaengautomat MBS 31117


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-H190702 · Cutting machines

          METZNER MASCHINENBAU - Ablaengautomat MBS 31117 - - 2006 -

          Technical details
          cross-section width: 16 mm︱cross-section heigth: 16 mm︱feed: - mm︱speed of feed: 60 m/min︱cuts max.: - Schnitte/m︱
            cross-section width: 16 mm
            cross-section heigth: 16 mm
            feed: - mm
            speed of feed: 60 m/min
            cuts max.: - Schnitte/m


        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Cutting Cutting machines MAX MÜLLER KM 465


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-H210801 · Cutting machines

          MAX MÜLLER - KM 465 - - 2000 -

          Technical details
          cross-section width: 5 Schläuche 3-5 mm︱cross-section heigth: 3 - 20 mm︱feed: 1,5 - 50 mm︱
          Condition: used, very good condition only approx. 1 year in production Specification: circular knife cutting machine for slices and rings - small cutting machine with high-speed rotating circular knife - feed and knife movement, pneumatic - Tube or strand diameter min.: 3 mm - Tube or strand diameter min.: 20 mm - Feed (ring or strand length): 1.5 - 50 mm - Output depending on material max.: 60 strokes/min - Optionally, the following can be cut 5 tubes or strands: diameter 3 mm to 5 mm 4 tubes or strands: diameter 5 mm to 7 mm 3 hoses or strands: diameter 7 mm to 12 mm 2 hoses or strands: diameter 12 mm to 15 mm 1 hose or string: diameter 15 mm to 20 mm - Power requirement approx.: 0.37 kW - Air supply min.: 5 bar - Operating voltage: 3x 400V, 50Hz, N, PE - Paint finish: RAL 6011 reseda green - Weight approx.: 160 kg
            cross-section width: 5 Schläuche 3-5 mm
            cross-section heigth: 3 - 20 mm
            feed: 1,5 - 50 mm
            Description :
            Condition: used, very good condition
            only approx. 1 year in production

            Specification: circular knife cutting machine
            for slices and rings

            - small cutting machine with high-speed rotating circular knife
            - feed and knife movement, pneumatic
            - Tube or strand diameter min.: 3 mm
            - Tube or strand diameter min.: 20 mm
            - Feed (ring or strand length): 1.5 - 50 mm
            - Output depending on material max.: 60 strokes/min
            - Optionally, the following can be cut
            5 tubes or strands: diameter 3 mm to 5 mm
            4 tubes or strands: diameter 5 mm to 7 mm
            3 hoses or strands: diameter 7 mm to 12 mm
            2 hoses or strands: diameter 12 mm to 15 mm
            1 hose or string: diameter 15 mm to 20 mm
            - Power requirement approx.: 0.37 kW
            - Air supply min.: 5 bar
            - Operating voltage: 3x 400V, 50Hz, N, PE
            - Paint finish: RAL 6011 reseda green
            - Weight approx.: 160 kg



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Cutting Cutting machines HEIDELBERG Querschneidmaschine Polar 155


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-H200901 · Cutting machines

          HEIDELBERG - Querschneidmaschine Polar 155 - - 1991 -

          Technical details
          cross-section width: 1.550 mm︱cross-section heigth: 100 mm︱feed: 10 - 1.500 mm︱
          Condition: used, Specification: Cross cutting machine for panels Model POLAR 155 EMC-MONITOR - Working width: 1,550 mm - Insert height approx.: 165 mm depending on material - insertion depth: 1,550 mm - feed: 10 - 1.500 mm - Main drive power: 5,5 KW - Width without storage table: 2,790 mm with storage tables: 3,550 mm - depth: 2,950 mm - height: 1.730 mm - front table length: 750 mm - table height: 900 mm - Weight: 4.120 kg - Pressing pressure min.: 150 kp max.: 4.500 kp - knife thickness: 137,5 mm - Feed speed slow / fast: 2.7 / 15.8 cm/sec.
            cross-section width: 1.550 mm
            cross-section heigth: 100 mm
            feed: 10 - 1.500 mm
            Description :
            Condition: used,

            Specification: Cross cutting machine for panels
            Model POLAR 155 EMC-MONITOR

            - Working width: 1,550 mm
            - Insert height approx.: 165 mm depending on material
            - insertion depth: 1,550 mm
            - feed: 10 - 1.500 mm
            - Main drive power: 5,5 KW
            - Width without storage table: 2,790 mm
            with storage tables: 3,550 mm
            - depth: 2,950 mm
            - height: 1.730 mm
            - front table length: 750 mm
            - table height: 900 mm
            - Weight: 4.120 kg
            - Pressing pressure min.: 150 kp
            max.: 4.500 kp
            - knife thickness: 137,5 mm
            - Feed speed
            slow / fast: 2.7 / 15.8 cm/sec.



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Cutting Cutting machines MEB SM 15/130


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-N181001 · Cutting machines

          MEB - SM 15/130 - - -

          Technical details
          speed of feed: 40 m/min︱feed: 1 - 99.999,9 mm︱cuts max.: 200 Schnitte/m︱cross-section width: 130 mm︱cross-section heigth: 15 mm︱
            speed of feed: 40 m/min
            feed: 1 - 99.999,9 mm
            cuts max.: 200 Schnitte/m
            cross-section width: 130 mm
            cross-section heigth: 15 mm


        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Cutting Cutting machines MEB SM 85


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-N181003 · Cutting machines

          MEB - SM 85 - - -

          Technical details
          cross-section width: 85 mm︱cross-section heigth: 25 - 40 mm︱feed: 1 - 999,999,9 mm︱speed of feed: 60 m/min︱cuts max.: 100 - 120 Schnitte/m︱
            cross-section width: 85 mm
            cross-section heigth: 25 - 40 mm
            feed: 1 - 999,999,9 mm
            speed of feed: 60 m/min
            cuts max.: 100 - 120 Schnitte/m


        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Cutting Cutting machines MB Bardowick GmbH Kombi-Schneidanlage CC


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-H211001 · Cutting machines

          MB Bardowick GmbH - Kombi-Schneidanlage CC - - -

          Technical details
          cross-section width: 100 mm︱cross-section heigth: 40 mm︱feed: 2 - 999.999,9 mm︱
          Condition: new, Specification: Impact knife cutting machine CC-600/40 for hoses and profiles - contact length: 600 mm - product diameter: 40 mm - belt width: 100 mm - Tractive force: 400 N to *800 N - Drive: *2 drives upper and lower belt - Conveyor belt speed: 100 m/min - Drive feed, cutting motor: Servo drives - Cutting capacity with blade max.: 4,000 1/min - Connected load: 3.5 kW - Dimensions L/H/B: 1,900 x 1,650 x 960 mm - Weight approx.: 580 kg
            cross-section width: 100 mm
            cross-section heigth: 40 mm
            feed: 2 - 999.999,9 mm
            Description :
            Condition: new,

            Specification: Impact knife cutting machine CC-600/40
            for hoses and profiles

            - contact length: 600 mm
            - product diameter: 40 mm
            - belt width: 100 mm
            - Tractive force: 400 N to *800 N
            - Drive: *2 drives upper and lower belt
            - Conveyor belt speed: 100 m/min
            - Drive feed, cutting motor: Servo drives
            - Cutting capacity with blade max.: 4,000 1/min
            - Connected load: 3.5 kW
            - Dimensions L/H/B: 1,900 x 1,650 x 960 mm
            - Weight approx.: 580 kg



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •