Rete europea di concessionari di macchine per stoccaggio

Bitte einen Suchbegriff eingeben - Inserisci un termine di ricerca
Categoria:
    Produttore:
      macchine:
        trader:

          SCHMITT REINHOLD GMBH Maschinen und Anlagen für BÄNDER - Stockist for used machines

          Machinelist:


          Roll Grinder

          used  Roll Grinder SCHMALTZ WR 4/3000


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-0910 · Roll Grinder

          SCHMALTZ - WR 4/3000 - - 1954/1995 -

          Technical details
          Center Height 203 mm︱Grinding Diameter 400/300 mm︱Grinding Length 3100 mm︱Grinding Length 3000 mm︱Workpiece Weight 0,8 t︱Dimension of Grinding Wheel 750/305x63 mm︱Required Space app. m︱Machine Weight app. t︱
          in accordance to the technical specification 09.10
            Center Height 203 mm
            Grinding Diameter 400/300 mm
            Grinding Length 3100 mm
            Grinding Length 3000 mm
            Workpiece Weight 0,8 t
            Dimension of Grinding Wheel 750/305x63 mm
            Description :
            in accordance to the technical specification 09.10
          Datasheet
          Request / Contact

          Blanking Press - Single Column

          used  Blanking Press - Single Column HYLATECHNIK UHSP 80 *15*XC


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-0803 · Blanking Press - Single Column

          HYLATECHNIK - UHSP 80 *15*XC - - 1985 -

          Technical details
          press force 80 t︱total stroke 150 mm︱machine weight app. 6,5 t︱required space app. 2,3 x 1,3 x 3,01 m︱
          HYDRAULIC PUNCH PRESS pressure performance max. 800 kN retraction 701 kN installation height (stroke below) 300 mm table clamping surface 830 x 600 mm ram clamping surface 830 x 400 mm jib length 350 mm table height over floor 800 mm t-slots 22, DIN 650, 3 x lengthwise pass-through hole in table ø 335 (ø 380 x 50) speeds: rapid speed until 70 kN: 320 mm/sec. working speed until 200 kN: 170 mm/sec. working speed nominal power: 28,5 mm/sec. return: 320 mm/sec. drive power: 18,5 kW, 380, 50 Hz valve voltage: G 24 V oil pressure: max. 280 bar cutting impact damping stroke max. 15 mm oil temperature min. 40 °C, max. 60 °C
            press force 80 t
            total stroke 150 mm
            machine weight app. 6,5 t
            required space app. 2,3 x 1,3 x 3,01 m
            Description :
            HYDRAULIC PUNCH PRESS

            pressure performance max. 800 kN
            retraction 701 kN
            installation height (stroke below) 300 mm
            table clamping surface 830 x 600 mm
            ram clamping surface 830 x 400 mm
            jib length 350 mm
            table height over floor 800 mm
            t-slots 22, DIN 650, 3 x lengthwise
            pass-through hole in table ø 335 (ø 380 x 50)

            speeds:
            rapid speed until 70 kN: 320 mm/sec.
            working speed until 200 kN: 170 mm/sec.
            working speed nominal power: 28,5 mm/sec.
            return: 320 mm/sec.

            drive power: 18,5 kW, 380, 50 Hz
            valve voltage: G 24 V
            oil pressure: max. 280 bar

            cutting impact damping stroke max. 15 mm
            oil temperature min. 40 °C, max. 60 °C
          Datasheet
          Request / Contact

          Blades

          used  Blades NN


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-05492 · Blades

          NN - - - -

          Technical details
          Shaft Diameter 200 mm︱Knife outside diameter app. 397 mm︱width 9,5 mm︱
            Shaft Diameter 200 mm
            Knife outside diameter app. 397 mm
            width 9,5 mm
          Datasheet
          Request / Contact

          Coil - Tilting Unit (Downender)

          used  Coil - Tilting Unit (Downender) AMT CDW 5.0


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-1504 · Coil - Tilting Unit (Downender)

          AMT - CDW 5.0 - - 2007 -

          Technical details
          capacity 5,0 t︱required space 2,1x2,1x2,2 m︱weight 3,16 t︱
          COIL – ROTATING – TILTING UNIT (rotating down ender) (prism / platform – construction) technical details: construction prism / platform dimension – prism – support (l x w) 1.300 x 1.040 mm dimension – platform – support (l x w) 1.560 x 1.330 mm dimension – platform-notch for C-hook (l x w) 615 x 250 mm coil outside – diameter max. 1.800 mm tilting range 90°- continuously tilting speed app. 20 sec. rotation range 180°- continuously rotation speed app. 20 sec. accessories: coil-rotating-tilting unit mounted on frame construction tilting process motor driven by chain (power 4,0 kW) rotation process motor driven by chain (power 1,1 kW) control cabinet mounted at frame construction control unit with cable coil limiting device (prism side) manually (by clamping lever) documentation
            capacity 5,0 t
            required space 2,1x2,1x2,2 m
            weight 3,16 t
            Description :
            COIL – ROTATING – TILTING UNIT (rotating down ender)
            (prism / platform – construction)

            technical details:
            construction prism / platform
            dimension – prism – support (l x w) 1.300 x 1.040 mm
            dimension – platform – support (l x w) 1.560 x 1.330 mm
            dimension – platform-notch for C-hook (l x w) 615 x 250 mm
            coil outside – diameter max. 1.800 mm
            tilting range 90°- continuously
            tilting speed app. 20 sec.
            rotation range 180°- continuously
            rotation speed app. 20 sec.

            accessories:
            coil-rotating-tilting unit mounted on frame construction
            tilting process motor driven by chain (power 4,0 kW)
            rotation process motor driven by chain (power 1,1 kW)
            control cabinet mounted at frame construction
            control unit with cable
            coil limiting device (prism side) manually (by clamping lever)
            documentation
          Datasheet
          Request / Contact
          used  Coil - Tilting Unit (Downender) BAUHAMMER 103101100


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-1509 · Coil - Tilting Unit (Downender)

          BAUHAMMER - 103101100 - - -

          Technical details
          capacity 10,0 t︱required space 3,35x1,45x2,1 m︱weight 3,5 t︱
          COIL – TILTING – UNIT (prisma / platform – construction) technical details: construction prism / platform dimension – prism – support (l x w) 650 x 700 mm dimension – platform – support (l x w) 1.740 x 815 mm dimension – floor - top edge platform 1.400 mm dimension – floor - top edge prism 1.360 mm accessories: coil-tilting-unit mounted on frame constructrion tilting process hydraulically (2 hydraulic cylinder) hydraulik-unit not available
            capacity 10,0 t
            required space 3,35x1,45x2,1 m
            weight 3,5 t
            Description :
            COIL – TILTING – UNIT
            (prisma / platform – construction)

            technical details:
            construction prism / platform
            dimension – prism – support (l x w) 650 x 700 mm
            dimension – platform – support (l x w) 1.740 x 815 mm
            dimension – floor - top edge platform 1.400 mm
            dimension – floor - top edge prism 1.360 mm

            accessories:
            coil-tilting-unit mounted on frame constructrion
            tilting process hydraulically (2 hydraulic cylinder)
            hydraulik-unit not available
          Datasheet
          Request / Contact

          Coil lifting carriage

          used  Coil lifting carriage NN


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-07582 · Coil lifting carriage

          NN - - - -

          Technical details
          Capacity 3,50 t︱Dimension - Prism - Support (L x W) 530 x 775 mm︱Required Space app. 1,44x1,25x1,58 m︱Machine Weight app. 1,92 t︱
          COIL CAR (L-design) - over floor design (construction) prism / counter-plate dimension – prism (support area – L x B) 530 x 775 mm dimension – counter-plate (h x w) 950 x 800 mm prism – lifting / lowering hydraulically lifting height 400 mm dimension – under edge wheel - prism support area 145 mm axle-base 1.000 mm wheel-base (outer edge wheel / wheel) 1100 mm accessories: coil car – movable motor driven (via chain) power 1,5 / 2,2 kW prism equipped with holes for coil-protection segments (rod) no. – coil-protection segments (rod) 2 pc. hydraulic – unit mounted on frame construction control box mounted on frame construction control unit mounted on frame construction
            Capacity 3,50 t
            Dimension - Prism - Support (L x. 530 x 775 mm
            Required Space app. 1,44x1,25x1,58 m
            Machine Weight app. 1,92 t
            Description :
            COIL CAR (L-design) - over floor

            design (construction) prism / counter-plate
            dimension – prism (support area – L x B) 530 x 775 mm
            dimension – counter-plate (h x w) 950 x 800 mm
            prism – lifting / lowering hydraulically
            lifting height 400 mm
            dimension – under edge wheel - prism support area 145 mm
            axle-base 1.000 mm
            wheel-base (outer edge wheel / wheel) 1100 mm

            accessories:
            coil car – movable motor driven (via chain) power 1,5 / 2,2 kW
            prism equipped with holes for coil-protection segments (rod)
            no. – coil-protection segments (rod) 2 pc.
            hydraulic – unit mounted on frame construction
            control box mounted on frame construction
            control unit mounted on frame construction
          Datasheet
          Request / Contact
          used  Coil lifting carriage NN


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-0761 · Coil lifting carriage

          NN - - - -

          Technical details
          Capacity 20,0 t︱Dimension - Prism - Support (L x W) 2.000 mm︱Required Space app. 3,0x2,6x1,6 m︱
          COIL – CAR (L-type) completely revamped technical details: construction coil-hutch with prism dimension – coil-hutch (support surface – l) 2.000 mm coil – Ø max. 1.900 mm coil-hutch – lifting / lowering hydraulically (2x hydraulic cylinder) lifting height (coil-hutch) 750 mm dimension – bottom edge wheel - prism-support surface 380 mm dimension – bottom edge wheel - middle coil eye 1.380 mm wheelbase (middle - middle wheel) 2.520 mm accessories: coil car motor driven movable by chain (hydraulic motor) pressarm with piano device hydraulically hydraulic – unit not available
            Capacity 20,0 t
            Dimension - Prism - Support (L x. 2.000 mm
            Required Space app. 3,0x2,6x1,6 m
            Description :
            COIL – CAR (L-type) completely revamped

            technical details:
            construction coil-hutch with prism
            dimension – coil-hutch (support surface – l) 2.000 mm
            coil – Ø max. 1.900 mm
            coil-hutch – lifting / lowering hydraulically (2x hydraulic cylinder)
            lifting height (coil-hutch) 750 mm
            dimension – bottom edge wheel - prism-support surface 380 mm
            dimension – bottom edge wheel - middle coil eye 1.380 mm
            wheelbase (middle - middle wheel) 2.520 mm

            accessories:
            coil car motor driven movable by chain (hydraulic motor)
            pressarm with piano device hydraulically

            hydraulic – unit not available
          Datasheet
          Request / Contact

          Crop shear

          used  Crop shear NN


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-059851 · Crop shear

          NN - - - -

          Technical details
          Material Width 1.500 mm︱Material Thickness max. 1,50 mm︱Blade Length 1.500 mm︱Required Space app. 2,46x1,12x1,80 m︱Machine Weight app. 1,80 t︱
          construction CUTTING SHEAR (CROP SHEAR - HYDRAULICALLY) daylight width: 1.560 mm material thickness (stainless steel): 1,50 mm at 650 Nmm² knife length: 1.500 mm - knives bifid (length each 775 mm) cutting angle adjustment mechanically accessories: machine mounted on base frame infeed side - mounted conveyor roll / infeed table adjustment (cutting process) from the bottom (lower knife block) upper knife block fixed in machine frame hydraulic unit integrated in frame construction no. - set of knives (1 set = 4 pieces): 3 1 set (4 pieces) mounted in the machine 1 set (4 pieces) as spare part (knives in used condition) 1 set (4 pieces) as spare part (knives new / original packed)
            Material Width 1.500 mm
            Material Thickness max. 1,50 mm
            Blade Length 1.500 mm
            Required Space app. 2,46x1,12x1,80 m
            Machine Weight app. 1,80 t
            Description :
            construction CUTTING SHEAR (CROP SHEAR - HYDRAULICALLY)

            daylight width: 1.560 mm
            material thickness (stainless steel): 1,50 mm at 650 Nmm²
            knife length: 1.500 mm - knives bifid (length each 775 mm)
            cutting angle adjustment mechanically

            accessories:
            machine mounted on base frame
            infeed side - mounted conveyor roll / infeed table
            adjustment (cutting process) from the bottom (lower knife block)
            upper knife block fixed in machine frame
            hydraulic unit integrated in frame construction
            no. - set of knives (1 set = 4 pieces): 3
            1 set (4 pieces) mounted in the machine
            1 set (4 pieces) as spare part (knives in used condition)
            1 set (4 pieces) as spare part (knives new / original packed)

          Datasheet
          Request / Contact

          Cut-to-length-lines

          used  Cut-to-length-lines FIMI


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-05530 · Cut-to-length-lines

          FIMI - - - 2017 -

          Technical details
          Material Width 100 - 600 mm︱Material Thickness 2,50 - 5,00 mm︱Coil Weight max. 15,0 t︱Coil Inside Diameter 508 / 610 mm︱Coil Outside Diameter 800 - 2.100 mm︱speed app. max. 60 m/min︱Required Space app. m︱Machine Weight app. t︱
          tensile strength max. 800 N/mm² yield strength max. 650 N/mm² working direction left - right otherwise according to technical specification 05.53-0
            Material Width 100 - 600 mm
            Material Thickness 2,50 - 5,00 mm
            Coil Weight max. 15,0 t
            Coil Inside Diameter 508 / 610 mm
            Coil Outside Diameter 800 - 2.100 mm
            speed app. max. 60 m/min
            Description :
            tensile strength max. 800 N/mm²
            yield strength max. 650 N/mm²

            working direction left - right

            otherwise according to technical specification 05.53-0
          Datasheet
          Request / Contact
          used  Cut-to-length-lines FIMI


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-05717 · Cut-to-length-lines

          FIMI - - - 2007 -

          Technical details
          Material Width 400 - 2.100 mm︱Material Thickness 0,50 - 3,00 mm︱Coil Weight max. 12,0 t︱speed 15 m/min︱Required Space app. m︱Machine Weight app. t︱
          tensile strength 270 - 500 N/mm² yield point 200 - 270 N/mm² otherwise according to technical specification 05.71-7
            Material Width 400 - 2.100 mm
            Material Thickness 0,50 - 3,00 mm
            Coil Weight max. 12,0 t
            speed 15 m/min
            Description :
            tensile strength 270 - 500 N/mm²
            yield point 200 - 270 N/mm²

            otherwise according to technical specification 05.71-7
          Datasheet
          Request / Contact
          used  Cut-to-length-lines VIGANO/RIVA


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-056810 · Cut-to-length-lines

          VIGANO/RIVA - - - 2000/2001 -

          Technical details
          Material Width 2.000 mm︱Material Thickness 1,50 - (5,00)6,00 mm︱Coil Weight max. 30,0 t︱Coil Inside Diameter 580 mm︱Coil Outside Diameter 1.250/1.500 mm︱Required Space app. m︱
          sheet length 580 - 6.000 mm working direction left - right otherwise according to technical specification 05.68-1.0
            Material Width 2.000 mm
            Material Thickness 1,50 - (5,00)6,00 mm
            Coil Weight max. 30,0 t
            Coil Inside Diameter 580 mm
            Coil Outside Diameter 1.250/1.500 mm
            Description :
            sheet length 580 - 6.000 mm
            working direction left - right

            otherwise according to technical specification 05.68-1.0
          Datasheet
          Request / Contact
          used  Cut-to-length-lines FIMI


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-055602c · Cut-to-length-lines

          FIMI - - - 1999 -

          Technical details
          Material Width 1550 mm︱Material Thickness 0,25-2,0(3,00) mm︱Coil Weight 20,0 t︱Coil Inside Diameter 508-610 mm︱Coil Outside Diameter 800-1800 mm︱Speed 0-60 m/min︱Required Space app. 38,8x8,9 m︱Machine Weight app. t︱
          CUT TO LENGTH LINE WITH BINDING LINE sheet length 400 - 5.000 mm stacking height incl. palette 500 mm otherwise according to technical specification 05.56-02-c
            Material Width 1550 mm
            Material Thickness 0,25-2,0(3,00) mm
            Coil Weight 20,0 t
            Coil Inside Diameter 508-610 mm
            Coil Outside Diameter 800-1800 mm
            Speed 0-60 m/min
            Required Space app. 38,8x8,9 m
            Description :
            CUT TO LENGTH LINE WITH BINDING LINE

            sheet length 400 - 5.000 mm
            stacking height incl. palette 500 mm

            otherwise according to technical specification 05.56-02-c
          Datasheet
          Request / Contact
          used  Cut-to-length-lines NOVASTILMEC


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-05576 · Cut-to-length-lines

          NOVASTILMEC - - - 1997/2004 -

          Technical details
          Material Width 1.500 mm︱Material Thickness 0,40-3,00 mm︱Coil Weight 25,0 t︱Coil Inside Diameter 508/610/700 mm︱Coil Outside Diameter 2.000 mm︱speed app. 5 - 50 m/min︱Required Space app. 45 x 10 m︱
          material: stainless/pre-painted/galvanized cold rolled steel working direction left - right otherwise according to technical specification 05.57-6
            Material Width 1.500 mm
            Material Thickness 0,40-3,00 mm
            Coil Weight 25,0 t
            Coil Inside Diameter 508/610/700 mm
            Coil Outside Diameter 2.000 mm
            speed app. 5 - 50 m/min
            Required Space app. 45 x 10 m
            Description :
            material: stainless/pre-painted/galvanized cold rolled steel
            working direction left - right

            otherwise according to technical specification 05.57-6
          Datasheet
          Request / Contact
          used  Cut-to-length-lines STAMCO


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-05532 · Cut-to-length-lines

          STAMCO - - - 1992 -

          Technical details
          Material Width max. 500 mm︱Material Thickness 0,50-4,00 mm︱Coil Weight max. 8,0 t︱Coil Inside Diameter 508/610 mm︱Coil Outside Diameter 700-2000 mm︱Required Space app. m︱Machine Weight app. t︱
          material cold rolled strip steel, dry, oiled, galvanized, hot rolled strip steel, scaled, dry, pickled, oiled tensile strength max. 700 N/mm² working direction left - right otherwise according to technical specification 05.53-2
            Material Width max. 500 mm
            Material Thickness 0,50-4,00 mm
            Coil Weight max. 8,0 t
            Coil Inside Diameter 508/610 mm
            Coil Outside Diameter 700-2000 mm
            Description :
            material
            cold rolled strip steel, dry, oiled, galvanized,
            hot rolled strip steel, scaled, dry, pickled, oiled
            tensile strength max. 700 N/mm²
            working direction left - right

            otherwise according to technical specification 05.53-2
          Datasheet
          Request / Contact
          used  Cut-to-length-lines RDB/SCHNUTZ


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-05615 · Cut-to-length-lines

          RDB/SCHNUTZ - - - 1989/1990 -

          Technical details
          Material Width 300 - 1.650 mm︱Material Thickness 0,50 - 3,00 mm︱Coil Weight 15,0 t︱speed max. 50 m/min︱Required Space app. m︱Machine Weight app. t︱
          CUT TO LENGTH LINE (multiple strips) tensile strength 670 - 950 N/mm² working direction right - left otherwise according to technical specification 05.61-5
            Material Width 300 - 1.650 mm
            Material Thickness 0,50 - 3,00 mm
            Coil Weight 15,0 t
            speed max. 50 m/min
            Description :
            CUT TO LENGTH LINE (multiple strips)

            tensile strength 670 - 950 N/mm²
            working direction right - left

            otherwise according to technical specification 05.61-5
          Datasheet
          Request / Contact
          used  Cut-to-length-lines HEILBRONN / SCHNUTZ


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-05575 · Cut-to-length-lines

          HEILBRONN / SCHNUTZ - - - 1986 -

          Technical details
          Material Width 50 - 1.550 mm︱Material Thickness 0,50 - 3,00 mm︱Coil Weight max. 5,0 t︱Coil Inside Diameter 508 / 610 mm︱Speed 15 m/min︱Required Space app. 17,0 x 8,0 m︱machine weight app. 50,0 t︱
          sheet length 4.000 mm working direction left - right otherwise according to technical specification 05.57-5
            Material Width 50 - 1.550 mm
            Material Thickness 0,50 - 3,00 mm
            Coil Weight max. 5,0 t
            Coil Inside Diameter 508 / 610 mm
            Speed 15 m/min
            Required Space app. 17,0 x 8,0 m
            machine weight app. 50,0 t
            Description :
            sheet length 4.000 mm
            working direction left - right

            otherwise according to technical specification 05.57-5
          Datasheet
          Request / Contact
          used  Cut-to-length-lines WMW/BLEMA


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-05607 · Cut-to-length-lines

          WMW/BLEMA - - - 1983 -

          Technical details
          Material Width 1.600 mm︱Material Thickness 6,00 - 20,00 mm︱Coil Weight 35,00 t︱no. of strokes 1-15 Hub/min︱no. leveling rolls 11 ︱leveling roll diameter app. 160 mm︱straightening feed 10 m/min︱adjustment 10 - 40 mm︱total power requirement 115 kW︱Required Space app. 25,0 x 5,0 x 3,0 m︱Machine Weight app. 85,0 t︱
          line consisting of: - double cone decoiler - leveler type UBR 1600 x 20 - guillotine shear, manufacturer Steiner 1800 x 25 mm - electric - hydraulic
            Material Width 1.600 mm
            Material Thickness 6,00 - 20,00 mm
            Coil Weight 35,00 t
            no. of strokes 1-15 Hub/min
            no. leveling rolls 11
            leveling roll diameter app. 160 mm
            straightening feed 10 m/min
            adjustment 10 - 40 mm
            total power requirement 115 kW
            Required Space app. 25,0 x 5,0 x 3,0 m
            Machine Weight app. 85,0 t
            Description :
            line consisting of:

            - double cone decoiler

            - leveler type UBR 1600 x 20

            - guillotine shear, manufacturer Steiner 1800 x 25 mm

            - electric

            - hydraulic
          Datasheet
          Request / Contact
          used  Cut-to-length-lines SIEMI


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-055761 · Cut-to-length-lines

          SIEMI - - - 1980/2010 -

          Technical details
          Material Width 1.500 mm︱Material Thickness 0,60 - 3,00 mm︱Coil Weight 22,0 t︱Coil Inside Diameter 508 - 600 mm︱Coil Outside Diameter 800 - 2.000 mm︱Speed max. 80 m/min︱Required Space app. m︱machine weight app. t︱
          sheet length 300 - 6.000 mm strength 52 kg/mm shear strength 42 kg/mm yield strength 24 - 34 kg/mm otherwise according to technical specification 05.57-6.1
            Material Width 1.500 mm
            Material Thickness 0,60 - 3,00 mm
            Coil Weight 22,0 t
            Coil Inside Diameter 508 - 600 mm
            Coil Outside Diameter 800 - 2.000 mm
            Speed max. 80 m/min
            Description :
            sheet length 300 - 6.000 mm
            strength 52 kg/mm
            shear strength 42 kg/mm
            yield strength 24 - 34 kg/mm

            otherwise according to technical specification 05.57-6.1
          Datasheet
          Request / Contact
          used  Cut-to-length-lines WILHELMSBURGER


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-056410 · Cut-to-length-lines

          WILHELMSBURGER - - - 1975 -

          Technical details
          Material Width 1.800 mm︱Material Thickness 0,50-1,50 mm︱Coil Weight 30,0 t︱Required Space app. m︱Machine Weight app. t︱
          length tolerance ± 0,5 mm width tolerance ± 0,5 mm diagonal tolerance ± 1,0 mm line consisting of: double side decoiler leveler no. of leveling rolls 21 leveling roll diameter 35 mm flying shear magnetic conveyor table - length 10 m 2 output tables electric pneumatic hydraulic
            Material Width 1.800 mm
            Material Thickness 0,50-1,50 mm
            Coil Weight 30,0 t
            Description :
            length tolerance ± 0,5 mm
            width tolerance ± 0,5 mm
            diagonal tolerance ± 1,0 mm

            line consisting of:
            double side decoiler
            leveler
            no. of leveling rolls 21
            leveling roll diameter 35 mm
            flying shear
            magnetic conveyor table - length 10 m
            2 output tables
            electric
            pneumatic
            hydraulic
          Datasheet
          Request / Contact
          used  Cut-to-length-lines RIZZATO


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-055603 · Cut-to-length-lines

          RIZZATO - - - -

          Technical details
          Material Width 1.100 mm︱Material Thickness 3,00 mm︱Coil Weight 15,0 t︱speed app. 55 m/min︱Required Space app. 22,0 x 10,0 m︱Machine Weight app. t︱
          the line consists of: coil car decoiler - capacity 15,0 t entrance table pinch roll 4 HI leveler - 19 leveling rolls, leveling roll diameter 42 mm looping pit guillotine shear inspection table stacker - 3.000 mm exhaust roller electric pneumatic hydraulic
            Material Width 1.100 mm
            Material Thickness 3,00 mm
            Coil Weight 15,0 t
            speed app. 55 m/min
            Required Space app. 22,0 x 10,0 m
            Description :
            the line consists of:
            coil car
            decoiler - capacity 15,0 t
            entrance table
            pinch roll
            4 HI leveler - 19 leveling rolls, leveling roll diameter 42 mm
            looping pit
            guillotine shear
            inspection table
            stacker - 3.000 mm
            exhaust roller

            electric
            pneumatic
            hydraulic
          Datasheet
          Request / Contact
          used  Cut-to-length-lines NN


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-05583 · Cut-to-length-lines

          NN - - - -

          Technical details
          Material Width 150 - 1.500 mm︱Material Thickness 0,40 - 1,25 mm︱Coil Weight max. 12,0 t︱Coil Inside Diameter 508/610 mm︱speed app. max. 20 m/min︱Required Space app. m︱Machine Weight app. t︱
          sheet length max. 4.000 (6.300) mm working direction left - right otherwise according to technical specification 05.58-3
            Material Width 150 - 1.500 mm
            Material Thickness 0,40 - 1,25 mm
            Coil Weight max. 12,0 t
            Coil Inside Diameter 508/610 mm
            speed app. max. 20 m/min
            Description :
            sheet length max. 4.000 (6.300) mm
            working direction left - right

            otherwise according to technical specification 05.58-3
          Datasheet
          Request / Contact
          used  Cut-to-length-lines FIMI/ATECNIN


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-05562 · Cut-to-length-lines

          FIMI/ATECNIN - - - -

          Technical details
          Material Width 200-1500 mm︱Material Thickness 0,40-2,50 mm︱Coil Weight max. 12,0 t︱Coil Inside Diameter - Decoiler 508 - 610 mm︱Machine Weight app. t︱Required Space app. m︱
          sheet length 350 – 7.000 mm material pickled and oiled, cold rolled, galvanized, electrolytically plated, coil-coated speed V = 30/40 m/min. working direction left - right otherwise according to technical specification 05.56-2
            Material Width 200-1500 mm
            Material Thickness 0,40-2,50 mm
            Coil Weight max. 12,0 t
            Coil Inside Diameter - Decoiler 508 - 610 mm
            Description :
            sheet length 350 – 7.000 mm
            material pickled and oiled, cold rolled, galvanized, electrolytically plated,
            coil-coated
            speed V = 30/40 m/min.
            working direction left - right

            otherwise according to technical specification 05.56-2
          Datasheet
          Request / Contact
          used  Cut-to-length-lines BRONX


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-05574 · Cut-to-length-lines

          BRONX - - - -

          Technical details
          Material Width 1.500 mm︱Material Thickness 1,00-5,00 mm︱Coil Weight 15,0/20,0 t︱coil inside diameter 508/610/700 mm︱coil outside diameter 2.000 mm︱Speed 30 m/min︱sheet length max. 500 - 4.000 mm︱Required Space app. m︱Machine Weight app. t︱
          revised in 2004 decoiler, coil weight 15,0/20,0 t leveler, no. – leveling rolls 17, leveling roll – Ø 63 mm flying shear, manufacturer CBC, with noise insulation chamber stacking unit, manufacturer VIGANO, year of construction 2004 2 chain conveyors hydraulic electric
            Material Width 1.500 mm
            Material Thickness 1,00-5,00 mm
            Coil Weight 15,0/20,0 t
            coil inside diameter 508/610/700 mm
            coil outside diameter 2.000 mm
            Speed 30 m/min
            sheet length max. 500 - 4.000 mm
            Description :
            revised in 2004

            decoiler, coil weight 15,0/20,0 t
            leveler, no. – leveling rolls 17, leveling roll – Ø 63 mm
            flying shear, manufacturer CBC, with noise insulation chamber
            stacking unit, manufacturer VIGANO, year of construction 2004
            2 chain conveyors
            hydraulic
            electric
          Datasheet
          Request / Contact
          used  Cut-to-length-lines MARIANI/ZAPPA


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-05681 · Cut-to-length-lines

          MARIANI/ZAPPA - - - -

          Technical details
          Material Width 2.000 mm︱Material Thickness 1,00 - 6,00 mm︱Coil Weight max. 25,0 t︱Coil Inside Diameter 508/760 mm︱Coil Outside Diameter max. 1.800 mm︱Working Speed 20 m/min︱Required Space app. m︱Machine Weight app. t︱
          tensile strength 270 - 490 N/mm² yield point 190 - 355 N/mm² working direction right - left otherwise according to technical specification 05.68-1
            Material Width 2.000 mm
            Material Thickness 1,00 - 6,00 mm
            Coil Weight max. 25,0 t
            Coil Inside Diameter 508/760 mm
            Coil Outside Diameter max. 1.800 mm
            Working Speed 20 m/min
            Description :
            tensile strength 270 - 490 N/mm²
            yield point 190 - 355 N/mm²
            working direction right - left

            otherwise according to technical specification 05.68-1
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          •   
          •   

            Profilo del commerciante: Schmitt Reinhold GmbH
          Maschinen und Anlagen Für Bänder,
          Bleche, Rohre und Profile

          Contatta Trader



            Schmitt Reinhold GmbH
          Maschinen und Anlagen Für Bänder,
          Bleche, Rohre und Profile

           Obernahmerstr. 74
            58119 - Hagen-Hohenlimburg
            Germania
            + 49 (0) 2334 4847 "> + 49 (0) 2334 4847
            +49 (0)2334 4840
            info@reinhold-schmitt.de
            www.reinhold-schmitt.de

          Profilo di Trader

          Siamo una società commerciale fondata in 1969 e abbiamo uno spazio di archiviazione di circa 3.200 m² e la nostra attività consiste nel vendere macchinari usati e nuovi per la lavorazione dei metalli.


          Ci occupiamo di acquisto e vendita di macchinari usati e nuovi, nonché di impianti di produzione per la produzione e la movimentazione di BOBINE, LAMIERE, TUBI e PROFILI in acciaio, acciaio inossidabile, rame, ottone e alluminio, ad esempio LAMINATOI A CALDO, LAMINATOI A FREDDO, LINEE DI TAGLIO, LINEE DI TAGLIO A LUNGHEZZA, DISCOILER, AVVOLGITORE, LINEE DI SALDATURA TUBI, LINEE DI PROFILATURA, LIVELLATRICE, RADDRIZZATRICE, IMPIANTI DI RICOTTURA e DUREZZA nonché componenti dei macchinari citati.

          Se necessario, gestiamo lo smantellamento, il carico, la logistica, l'importazione, il processo di esportazione e il riassemblaggio delle strutture, nonché la modernizzazione o la modifica della modalità di controllo. Assicuriamo in qualsiasi momento una collaborazione professionale e qualificata per soddisfare le vostre aspettative.


          Abbiamo quasi 50 anni di esperienza nel commercio di macchinari usati e nuovi, nonché impianti di produzione per la produzione e la movimentazione di COILS, METALLI, TUBI e PROFILI.




          Contattaci

          REINHOLD SCHMITT GMBH


          Contatta persone:

            Roland Becker

            Holger Suberg

            Giovanna Isopp


            Obernahmerstrasse 74, D - 58119 Hagen (Germania)

            02334/4847

            02334/4840

            info@reinhold-schmitt.de




          Schmitt Reinhold GmbH Maschinen Und Anlagen Für Bänder, Bleche, Rohre Und Profile 58119 - Hagen-Hohenlimburg Obernahmerstr. 74 Deutschland
          Schmitt Reinhold GmbH Maschinen Und Anlagen Für Bänder, Bleche, Rohre Und Profile

          Obernahmerstr. 74



          Contact Trader


            Schmitt Reinhold GmbH Maschinen Und Anlagen Für Bänder, Bleche, Rohre Und Profile
           Obernahmerstr. 74
            58119 - Hagen-Hohenlimburg
            Deutschland
            +49 (0)2334 4847
            +49 (0)2334 4840
            info@reinhold-schmitt.de
            www.reinhold-schmitt.de
            Contact person:

           




          Machine category


          Abwickelhaspel · Aufwickelhaspel · Bandoberflächen - Bearbeitungsanlage · Besäumschere · Besäumschere mit Schrottschneider · Bundhubwagen · Coil - Wende - Einrichtung · Drehkreuz · Duo - Walzwerk · Gummierte Auswerferringe · Krananlagen · Längsteilanlage · Papierwickler · Profilieranlage · Querteilanlage · Querteilschere · Richtmaschine · Rohrschweißanlagen · Scherenmesser · Schopfschere · Schrottschneider · Spanngerät · Stanzpresse - Einständer · Stapelanlage · Umwickelanlage · Walzenschleifmaschine · Walzwerk Duo Dressier ·