Rete europea di concessionari di macchine per stoccaggio

Bitte einen Suchbegriff eingeben - Inserisci un termine di ricerca
Categoria:
    Produttore:
      macchine:
        trader:

          Schmeisser Werkzeugmaschinen - Stockist for used machines

          Machinelist:


          Bench Drilling Machine

          used  Bench Drilling Machine MAXION ECOMAX 14


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04531 · Bench Drilling Machine

          MAXION - ECOMAX 14 - - -

          Technical details
          14 mm︱Boring power 15 mm︱ MK 2 ︱bore depth 70 mm︱throat 180 mm︱ bis 275 mm︱ 529 mm︱table surface area 250x220 mm︱column diameter 65 mm︱Total height 890 mm︱total power requirement 0,6/1,0 kW︱ 420-2100 U/min.︱weight of the machine ca. 63 kg︱
          Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. Machine with CE mark! new machin Domestic equipments: - Stepless speed control - Table adjustment via rack - Digital speed display - Full motor protection - drill protection
            14 mm
            Boring power 15 mm
            MK 2
            bore depth 70 mm
            throat 180 mm
            bis 275 mm
            529 mm
            table surface area 250x220 mm
            column diameter 65 mm
            Total height 890 mm
            total power requirement 0,6/1,0 kW
            420-2100 U/min.
            weight of the machine ca. 63 kg
            Description :
            Please notice:
            We would be happy to make you a free offer. However, please understand that we
            only process inquiries with complete address details.

            Machine with CE mark!

            new machin

            Domestic equipments:
            - Stepless speed control
            - Table adjustment via rack
            - Digital speed display
            - Full motor protection
            - drill protection
          Datasheet
          Request / Contact

          Pillar Drilling Machine

          used  Pillar Drilling Machine ALZMETALL ALZSTAR 40/SV


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04200 · Pillar Drilling Machine

          ALZMETALL - ALZSTAR 40/SV - - -

          Technical details
          bore capacity in steel (diameter) 40 mm︱throat 293 mm︱bore stroke 120 mm︱spindle taper MT 3 ︱column diameter 115 mm︱table surface area 514 x 360 mm︱spindle turning speed - stepless 160 - 2250 U/min︱total power requirement 1,0/1,6 kW︱weight of the machine ca. 0,285 t︱dimensions of the machine ca. m︱Condition: new / unused ︱The machine can be viewed under current.
          Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. 37981 400 V, 50 Hz, colour: light grey RAL 7035 continuous speed control, digital speed indication, push button for emergency switch off, turning switch for clockwise/counterclockwise rotation, motor protection switch, IP 54, connecting plug, finish: structure varnish, new spindle bearing, new step pulleys, belts aso. operation manual, wiring diagram. Machine has been checked in our workshop, including electr. testing report.
            bore capacity in steel (diameter. 40 mm
            throat 293 mm
            bore stroke 120 mm
            spindle taper MT 3
            column diameter 115 mm
            table surface area 514 x 360 mm
            spindle turning speed - stepless 160 - 2250 U/min
            total power requirement 1,0/1,6 kW
            weight of the machine ca. 0,285 t
            Description :
            Please notice:
            We would be happy to make you a free offer. However, please understand that we
            only process inquiries with complete address details.

            37981
            400 V, 50 Hz, colour: light grey RAL 7035
            continuous speed control, digital speed indication, push button for emergency
            switch off,
            turning switch for clockwise/counterclockwise rotation, motor protection
            switch, IP 54,
            connecting plug, finish: structure varnish, new spindle bearing, new step
            pulleys, belts aso.
            operation manual, wiring diagram.

            Machine has been checked in our workshop, including electr. testing report.
          Datasheet
          Request / Contact
          used  Pillar Drilling Machine ALZMETALL AX 4/SV


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04529 · Pillar Drilling Machine

          ALZMETALL - AX 4/SV - - -

          Technical details
          55 mm︱ M 30M 36MK 4 ︱spindle turning speed - stepless 70-1.200 U/min︱spindle stroke 140 mm︱throat 300 mm︱column diameter 145 mm︱ 615x430 mm︱distance spindle /table min./max. 150/735 mm︱ 2 x 14 x 224 mm︱feed 0,1 + 0,3 mm/U︱Machine height 1850 mm︱weight 380 kg︱drive motor 1,8/2,9 kW︱
          Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. Standard equipment: - Lockable main switch with motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP - Infinitely variable speed adjustment - Digital speed display - Feed overload protection - Protection class IP 54 - Spindle protection with electrical fuse Item 20.1 Thread cutting device with foot switch, for thread cutting with Stop, max. 6 threads / min., (Thread cutting performance dependent on spindle speed) ************************************************** ***************************** !!! NEW FOR YOU AS A SERVICE !!! Machine leasing up to 60 months without down payment, without residual value, personal advice and individual leasing rate calculation on request. ************************************************** *****************************
            55 mm
            M 30
            M 36
            MK 4
            spindle turning speed - stepless 70-1.200 U/min
            spindle stroke 140 mm
            throat 300 mm
            column diameter 145 mm
            615x430 mm
            distance spindle /table min./max. 150/735 mm
            2 x 14 x 224 mm
            feed 0,1 + 0,3 mm/U
            Machine height 1850 mm
            weight 380 kg
            drive motor 1,8/2,9 kW
            Description :
            Please notice:
            We would be happy to make you a free offer. However, please understand that we
            only process inquiries with complete address details.

            Standard equipment:
            - Lockable main switch with motor protection switch
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Infinitely variable speed adjustment
            - Digital speed display
            - Feed overload protection
            - Protection class IP 54
            - Spindle protection with electrical fuse

            Item 20.1
            Thread cutting device with foot switch, for thread cutting with
            Stop, max. 6 threads / min., (Thread cutting performance dependent on spindle
            speed)


            ************************************************** *****************************
            !!! NEW FOR YOU AS A SERVICE !!!

            Machine leasing up to 60 months without down payment, without residual value,
            personal advice and individual leasing rate calculation on request.

            ************************************************** *****************************
          Datasheet
          Request / Contact

          Rapid Radial Drilling Machine

          used  Rapid Radial Drilling Machine DONAU DR 23


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04426 · Rapid Radial Drilling Machine

          DONAU - DR 23 - - 1974 -

          Technical details
          bore capacity in steel (diameter) 23 mm︱arm length 920 mm︱workpiece height max. mm︱spindle turning speed range 70 - 1550 U/min︱feed - independent 0,075, 0,015, 0,3 mm︱distance spindle middle to column middle 385/995 mm︱table-size 500 x 1200 mm︱spindle stroke - max. 135 mm︱bore spindles - Morse Taper 3 Mk︱total power requirement kW︱weight of the machine ca. 1,4 t︱Mechanic: normal ︱optical condition: normal ︱The machine can be viewed under current.
          2128 4 380 V with CEE plug and cable colour: green accessories: - facility for thread cutting - autom. feed - rapid clamping boring chuck with insert tap - reducing collar Mk 3:2 - reducing collar Mk 3:1 - machine lamp - cooling equipment - operating instruction Machine is in condition as from seller. Functions are okay and machine can be inspected under power. Machine will be delivered with an electrical acceptance protocol.
            bore capacity in steel (diameter. 23 mm
            arm length 920 mm
            spindle turning speed range 70 - 1550 U/min
            feed - independent 0,075, 0,015, 0,3 mm
            distance spindle middle to colum. 385/995 mm
            table-size 500 x 1200 mm
            spindle stroke - max. 135 mm
            bore spindles - Morse Taper 3 Mk
            weight of the machine ca. 1,4 t
            Description :
            2128 4
            380 V with CEE plug and cable
            colour: green

            accessories:
            - facility for thread cutting
            - autom. feed
            - rapid clamping boring chuck with insert tap
            - reducing collar Mk 3:2
            - reducing collar Mk 3:1
            - machine lamp
            - cooling equipment
            - operating instruction

            Machine is in condition as from seller. Functions are okay and machine
            can be inspected under power.

            Machine will be delivered with an electrical acceptance protocol.
          Datasheet
          Request / Contact

          Tool Room Milling Machine - Universal

          used  Tool Room Milling Machine - Universal Mikron WF 72 C


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04472 · Tool Room Milling Machine - Universal

          Mikron - WF 72 C - - 1995 -

          Technical details
          x-travel 900 mm︱y-travel 630 mm︱z-travel 500 mm︱table-size 1200 x 600 mm︱spindle taper ISO 40 ︱turning speed range 20 - 6300 U/min︱feeds longditudinal/cross/vertical 2 - 4000 mm/min︱rapid motion -longitudinal/cross/vertical 10/10/8 m/min︱numbers of positions in the tool changer 22 ︱quill stroke 100 mm︱total power requirement 20 kW︱weight of the machine ca. 5,7 t︱dimensions of the machine ca. 4 x 3 x 2,4 m︱electronic hand wheel ︱cooling equipment
          Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. in condition from seller! 33.01 392 with CEE plug and cable 3-D trace control Heidenhain TNC 425 22 fold toll changer colour graphics vertical head with hydraulic tool clamping fix table
            x-travel 900 mm
            y-travel 630 mm
            z-travel 500 mm
            table-size 1200 x 600 mm
            spindle taper ISO 40
            turning speed range 20 - 6300 U/min
            feeds longditudinal/cross/vertic. 2 - 4000 mm/min
            rapid motion -longitudinal/cross. 10/10/8 m/min
            numbers of positions in the tool. 22
            quill stroke 100 mm
            total power requirement 20 kW
            weight of the machine ca. 5,7 t
            dimensions of the machine ca. 4 x 3 x 2,4 m
            Description :

            Please notice:
            We would be happy to make you a free offer. However, please understand that we
            only process inquiries with complete address details.


            in condition from seller!

            33.01 392
            with CEE plug and cable
            3-D trace control Heidenhain TNC 425
            22 fold toll changer
            colour graphics
            vertical head with hydraulic tool clamping
            fix table
          Datasheet
          Request / Contact
          used  Tool Room Milling Machine - Universal MAHO MH 600 E


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04452 · Tool Room Milling Machine - Universal

          MAHO - MH 600 E - - 1991 -

          Technical details
          x-travel 600 mm︱y-travel 450 mm︱z-travel 450 mm︱spindle taper ISO 40 ︱turning speed range 20 - 5000 U/min︱feeds 1 - 4000 mm/min︱rapid traverse 6000 mm/min︱quill stroke 80 mm︱no. of tools in magazin 30 ︱table surface area 740 x 445 mm︱total power requirement 15 kW︱
          Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. SPARE PART CARRIER Special net price € 9,900 Equipment: * CNC path control PHILIPS 532 * electronic handwheel * Tool changer 22-fold * Tool changer 30x. * fixed angle table * electronic handwheel * Operating hours approx. 29500 h * Protective cabin * Coolant device * Machine light * Backup battery NEW * Parameter list * Transport traverse * various tool holders * Operating instructions, operating instructions, spare parts plan
            x-travel 600 mm
            y-travel 450 mm
            z-travel 450 mm
            spindle taper ISO 40
            turning speed range 20 - 5000 U/min
            feeds 1 - 4000 mm/min
            rapid traverse 6000 mm/min
            quill stroke 80 mm
            no. of tools in magazin 30
            table surface area 740 x 445 mm
            total power requirement 15 kW
            Description :
            Please notice:
            We would be happy to make you a free offer. However, please understand that we
            only process inquiries with complete address details.

            SPARE PART CARRIER


            Special net price € 9,900


            Equipment:

            * CNC path control PHILIPS 532
            * electronic handwheel
            * Tool changer 22-fold



            * Tool changer 30x.
            * fixed angle table
            * electronic handwheel
            * Operating hours approx. 29500 h
            * Protective cabin
            * Coolant device
            * Machine light
            * Backup battery NEW
            * Parameter list
            * Transport traverse
            * various tool holders
            * Operating instructions, operating instructions, spare parts plan
          Datasheet
          Request / Contact
          used  Tool Room Milling Machine - Universal DECKEL FP 1


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04658 · Tool Room Milling Machine - Universal

          DECKEL - FP 1 - - 1989 -

          Technical details
          x-travel 300 mm︱y-travel 160 mm︱z-travel 340 mm︱engine output 1,5/1,9 kW︱weight of the machine ca. 0,7 t︱Heidenhain digital readout, axes: 3 Aktiv ︱vertical milling head Sk 40 Sk40 S 20x2 ︱operating instruction ︱operating key ︱Mechanic: good sehr gut ︱Optical condition: good sehr gut ︱The machine can be viewed under current.
          DANGER: We would be happy to provide you with a free offer. However, please have Understand that we only have inquiries with a complete address to edit. 2102-5498 380 V, 50 Hz, with CEE plug and cable Colour: green RAL 6011 "Compliance with the Machinery Directive" on request at extra cost !! (see list below) # milling protection device electr. secured, integrated in the emergency stop chain! ° already available: ° Engine brake ° Safety handwheels ° 2 x emergency stop switches ° Mandatory and prohibition signs according to the latest standard ° Electrical acceptance according to DGUV - V 3 with protocol Accesories: * new bellows in X / Y / Z * 3 axis Heidenhain active digital display * Central lubrication * Rigid angle table * Coolant facility * optional machine lamp Operating instructions, spare parts list, wiring diagram The machine is workshop-tested and comes with an electrical test report! Further conversions for occupational safety possible on request!
            x-travel 300 mm
            y-travel 160 mm
            z-travel 340 mm
            engine output 1,5/1,9 kW
            weight of the machine ca. 0,7 t
            Heidenhain digital readout, axes. 3 Aktiv
            vertical milling head Sk 40 Sk40 S 20x2
            Mechanic: good sehr gut
            Optical condition: good sehr gut
            Description :
            DANGER:
            We would be happy to provide you with a free offer. However, please have
            Understand that we only have inquiries with a complete address
            to edit.


            2102-5498

            380 V, 50 Hz, with CEE plug and cable

            Colour: green RAL 6011

            "Compliance with the Machinery Directive" on request at extra cost !!
            (see list below)

            # milling protection device electr. secured, integrated in the emergency stop
            chain!

            ° already available:
            ° Engine brake
            ° Safety handwheels
            ° 2 x emergency stop switches
            ° Mandatory and prohibition signs according to the latest standard
            ° Electrical acceptance according to DGUV - V 3 with protocol

            Accesories:

            * new bellows in X / Y / Z
            * 3 axis Heidenhain active digital display
            * Central lubrication
            * Rigid angle table
            * Coolant facility

            * optional machine lamp


            Operating instructions, spare parts list, wiring diagram

            The machine is workshop-tested and comes with an electrical test report!

            Further conversions for occupational safety possible on request!
          Datasheet
          Request / Contact
          used  Tool Room Milling Machine - Universal DECKEL FP 1


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04559 · Tool Room Milling Machine - Universal

          DECKEL - FP 1 - - 1982 -

          Technical details
          x-travel 290/300 mm︱y-travel 160 mm︱z-travel 330/340 mm︱engine output 1,5/1,9 kW︱weight of the machine ca. 0,7 t︱Heidenhain digital readout, axes: 3 Aktiv ︱vertical milling head Sk 40 Sk 40 S 20x2 ︱operating instruction ︱operating key ︱Optical condition: very good ︱Mechanic: very good ︱The machine can be viewed under current.
          ATTENTION: We would be happy to provide you with a free offer. However, please have Understand that we only have inquiries with a complete address to edit. 2102-2047 380 V, 50 Hz, with CEE plug and cable Color green "Compliance with the Machinery Directive" on request at extra cost !! (see list below) # milling protection device electr. secured, integrated in the emergency stop chain! ° already available: ° Engine brake ° Safety handwheels ° 2 x emergency stop switches ° Mandatory and prohibition signs according to the latest standard ° Electrical acceptance according to DGUV - V 3 with protocol Accesories: * new bellows in X / Y / Z * 3-axis Heidenhain active digital display TNC 113 * Horizontal milling device including counter bearing * Angle table adjustable * Chip tray * Coolant facility * Articulated cold light luminous * SK 40S 20x2 * 34 collets * 4 machine shoes * Operating/instruction manual, spare parts list, wiring diagrams, operating keys The machine is workshop tested and comes with an electrical test report delivered! Further conversions for occupational safety possible on request!
            x-travel 290/300 mm
            y-travel 160 mm
            z-travel 330/340 mm
            engine output 1,5/1,9 kW
            weight of the machine ca. 0,7 t
            Heidenhain digital readout, axes. 3 Aktiv
            vertical milling head Sk 40 Sk 40 S 20x2
            Description :
            ATTENTION:
            We would be happy to provide you with a free offer. However, please have
            Understand that we only have inquiries with a complete address
            to edit.

            2102-2047
            380 V, 50 Hz, with CEE plug and cable
            Color green

            "Compliance with the Machinery Directive" on request at extra cost !!
            (see list below)

            # milling protection device electr. secured, integrated in the emergency stop
            chain!

            ° already available:
            ° Engine brake
            ° Safety handwheels
            ° 2 x emergency stop switches
            ° Mandatory and prohibition signs according to the latest standard
            ° Electrical acceptance according to DGUV - V 3 with protocol

            Accesories:

            * new bellows in X / Y / Z
            * 3-axis Heidenhain active digital display TNC 113
            * Horizontal milling device including counter bearing
            * Angle table adjustable
            * Chip tray
            * Coolant facility
            * Articulated cold light luminous
            * SK 40S 20x2
            * 34 collets
            * 4 machine shoes

            * Operating/instruction manual, spare parts list, wiring diagrams, operating
            keys

            The machine is workshop tested and comes with an electrical test report
            delivered!

            Further conversions for occupational safety possible on request!
          Datasheet
          Request / Contact

          Tool Grinder - Universal

          used  Tool Grinder - Universal DECKEL S11


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04596 · Tool Grinder - Universal

          DECKEL - S11 - - 2020 -

          Technical details
          max. grinding diameter 238 - 620 mm︱grinding length 190 mm︱workpiece length 380 - 940 mm︱current capacity 380 kVA︱power capacity - grinding motor 1,1 kW︱speeds of grinding spindle 2 - 10.000 U/min︱total power requirement 2,2 kW︱operating key and instruction ︱collets ︱Mechanic: very good ︱Optical condition: very good ︱Condition: general reconditioning ︱The machine can be viewed under current.
          Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. New in 1996 / overhauled in 2020 1913 400 V, 50 Hz, with CEE plug and. electric wire * Machine and accessories completely overhauled Color: 2 K repainting Stand RAL 7005 mouse gray Structure and accessories RAL 7035 light gray motorized height adjustment, axial grinding spindle adjustment * Complete electrical conversion includes: > Fi circuit breaker > new three-phase drive > new brake motor > new frequency regulation > new touch-safe built-in electronics > EMC screw connections > EMC cables > new protective tubes > Emergency stop switch > new control panel * Machine stand and support plate ground Equipment: * Video measurement system with CCD camera and image processing software with a new measuring cross slide new RSF scales on the measuring cross slide and on the Machine axes vertical and cross (4 axes) including complete attachment and adjustment For further versions, see attached data sheet * LED machine light * Dividing head Sk 40 with dividing disk 24 R, optical attachment prepared * 1 set = 4 dividing discs 14R, 16R, 18R, 22 R (Other pitches available on request) * Tightening screw M 16 69871 * Setting gauge * Universal setting gauge * Tooth support complete * Twist and relief grinding device with rack housing * Handwheel facility * Dressing device * Dressing diamond f. dto. * motorized drive (cylindrical grinding device) * Vice swivels 3 levels * Complete dust extraction system (without vacuum cleaner) * Pliers sleeve with extraction nut * 1 set = 35 collets 1.0 - 18.0 mm by 0.5 mm stgd. S 20x2 * 10 direct collets Sk 40 6/8/10/12/14/16/18/20/22/25 mm * Attachment chuck 48 mm * dto 75 mm * dto 36 mm * dto 51 mm * put-on chuck for small borings * 2 protective hood * set of hanging device for transport * 5 adjusting screw * 2 un. LED machine light 220 V * 2 un. trapezoidal thread spindel for cross slide* * Tool cabinet with shelves * Operating key, operating instructions, spare parts list, circuit diagram * technical grinding instructions * Machine and accessories overhauled and with electrical acceptance report * Domestic 6 months warranty
            max. grinding diameter 238 - 620 mm
            grinding length 190 mm
            workpiece length 380 - 940 mm
            current capacity 380 kVA
            power capacity - grinding motor 1,1 kW
            speeds of grinding spindle 2 - 10.000 U/min
            total power requirement 2,2 kW
            Description :
            Please notice:
            We would be happy to make you a free offer. However, please understand that we
            only process inquiries with complete address details.

            New in 1996 / overhauled in 2020

            1913

            400 V, 50 Hz, with CEE plug and. electric wire

            * Machine and accessories completely overhauled

            Color: 2 K repainting
            Stand RAL 7005 mouse gray
            Structure and accessories RAL 7035 light gray

            motorized height adjustment, axial grinding spindle adjustment

            * Complete electrical conversion includes:

            > Fi circuit breaker
            > new three-phase drive
            > new brake motor
            > new frequency regulation
            > new touch-safe built-in electronics
            > EMC screw connections
            > EMC cables
            > new protective tubes
            > Emergency stop switch
            > new control panel

            * Machine stand and support plate ground

            Equipment:

            * Video measurement system with CCD camera and image processing software
            with a new measuring cross slide
            new RSF scales on the measuring cross slide and on the
            Machine axes vertical and cross (4 axes)
            including complete attachment and adjustment
            For further versions, see attached data sheet

            * LED machine light
            * Dividing head Sk 40 with dividing disk 24 R, optical attachment prepared
            * 1 set = 4 dividing discs 14R, 16R, 18R, 22 R
            (Other pitches available on request)
            * Tightening screw M 16 69871
            * Setting gauge
            * Universal setting gauge
            * Tooth support complete
            * Twist and relief grinding device with rack housing
            * Handwheel facility
            * Dressing device
            * Dressing diamond f. dto.
            * motorized drive (cylindrical grinding device)
            * Vice swivels 3 levels
            * Complete dust extraction system (without vacuum cleaner)
            * Pliers sleeve with extraction nut
            * 1 set = 35 collets 1.0 - 18.0 mm by 0.5 mm stgd. S 20x2
            * 10 direct collets Sk 40 6/8/10/12/14/16/18/20/22/25 mm
            * Attachment chuck 48 mm
            * dto 75 mm
            * dto 36 mm
            * dto 51 mm
            * put-on chuck for small borings
            * 2 protective hood
            * set of hanging device for transport
            * 5 adjusting screw
            * 2 un. LED machine light 220 V
            * 2 un. trapezoidal thread spindel for cross slide*
            * Tool cabinet with shelves

            * Operating key, operating instructions, spare parts list, circuit diagram
            * technical grinding instructions
            * Machine and accessories overhauled and with electrical acceptance report

            * Domestic 6 months warranty
          Datasheet
          Request / Contact
          used  Tool Grinder - Universal DECKEL S 11 Speed


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04654 · Tool Grinder - Universal

          DECKEL - S 11 Speed - - 2016 -

          Technical details
          max. grinding diameter 238 - 620 mm︱grinding length 190 mm︱workpiece length 380 - 940 mm︱spindle turning speed - stepless 2 - 12000 U/min︱current capacity 380 kVA︱power capacity - grinding motor 1,1 kW︱total power requirement 2,2 kW︱weight of the machine ca. 0,6 t︱operating key and instruction ︱Mechanic: very good ︱Optical condition: very good ︱The machine can be viewed under current.
          2016 S25 003004 400 V, 50/60 Hz, with CEE plug and cable Color: light gray motorized height adjustment, axial grinding spindle adjustment Equipment: * Opto-electronic measuring device with measuring electronics Image processing, PC (Original ISOG) * CCD camera and monitor * Dividing head Sk 40 with dividing disk 24 R * 1 dividing disk each 14, 16, 18 * Tightening screw M 16 * Counter bearing complete with 4 center punch points * Center point Sk 40 with driver * Twist-u. Relief grinding device with rack housing * Dust extraction completely without vacuum cleaner * LED machine light * Tooth support complete with support and sliding blades * Setting gauge * Universal setting gauge * motorized drive cpl. * Handwheel facility * Dressing device with 3 diamonds * 1 set of collets 1.0 - 17.5 mm by 0.5 mm rising * Pliers sleeve and extraction nut and key * 10 pieces of direct collets Sk 40 6 - 25 mm * 4 cone reducing sleeves Sk 40 x Mk 1, 2, 3, 4 * Clamping nut * 12 grinding wheel chucks * Tool cabinet with shelves * 2 protective hoods * various diamond / borazon discs * Operating instructions and key, spare parts list, circuit diagram * Set of technical grinding instructions (clarify language !!) ##### Machine is partially overhauled and has an electrical acceptance report!#####
            max. grinding diameter 238 - 620 mm
            grinding length 190 mm
            workpiece length 380 - 940 mm
            spindle turning speed - stepless 2 - 12000 U/min
            current capacity 380 kVA
            power capacity - grinding motor 1,1 kW
            total power requirement 2,2 kW
            weight of the machine ca. 0,6 t
            Description :
            2016 S25 003004

            400 V, 50/60 Hz, with CEE plug and cable

            Color: light gray

            motorized height adjustment, axial grinding spindle adjustment

            Equipment:

            * Opto-electronic measuring device with measuring electronics
            Image processing, PC (Original ISOG)
            * CCD camera and monitor
            * Dividing head Sk 40 with dividing disk 24 R
            * 1 dividing disk each 14, 16, 18
            * Tightening screw M 16
            * Counter bearing complete with 4 center punch points
            * Center point Sk 40 with driver
            * Twist-u. Relief grinding device with rack housing
            * Dust extraction completely without vacuum cleaner
            * LED machine light
            * Tooth support complete with support and sliding blades
            * Setting gauge
            * Universal setting gauge
            * motorized drive cpl.
            * Handwheel facility
            * Dressing device with 3 diamonds
            * 1 set of collets 1.0 - 17.5 mm by 0.5 mm rising
            * Pliers sleeve and extraction nut and key
            * 10 pieces of direct collets Sk 40 6 - 25 mm
            * 4 cone reducing sleeves Sk 40 x Mk 1, 2, 3, 4
            * Clamping nut
            * 12 grinding wheel chucks
            * Tool cabinet with shelves
            * 2 protective hoods
            * various diamond / borazon discs

            * Operating instructions and key, spare parts list, circuit diagram
            * Set of technical grinding instructions (clarify language !!)

            ##### Machine is partially overhauled and has an electrical
            acceptance report!#####
          Datasheet
          Request / Contact
          used  Tool Grinder - Universal DECKEL S 11 Speed


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04679 · Tool Grinder - Universal

          DECKEL - S 11 Speed - - 2002 -

          Technical details
          max. grinding diameter 238 - 620 mm︱grinding length 190 mm︱workpiece length 380 - 940 mm︱spindle turning speed - stepless 2 - 12000 U/min︱current capacity 380 kVA︱power capacity - grinding motor 1,1 kW︱total power requirement 2,2 kW︱weight of the machine ca. 0,6 t︱operating key and instruction ︱Mechanic: very good ︱Optical condition: very good ︱The machine can be viewed under current.
          2189 400 V, 50 Hz, with CEE plug and cable Colour: body pastel turquoise RAL 6034 Stand blue-grey RAL 7031 Motorized height adjustment, axial grinding spindle adjustment Machine as new !! * Accesories: * SK 40 dividing head with 24 R dividing disc * Graduated disc 20 R * Tightening screw M 16 69871 * Spiral and relief grinding device with rack housing * Counter bearing with 4 tailstock centres * Center point with driver * Dressing device * Dressing diamond * Radius grinding device SK 40 complete with setting gauge * Steel holder for ditto * Support fingers with sliding blades * Support finger holder * Complete dust extraction without suction * Halogen light * Tooth support complete * Setting gauge * Plier sleeve and jacking nut and wrench * 35 collets 1.0 - 18.0 mm increasing by 0.5 mm * 1 set of SK 40 direct collets 6, 8, 10, 12, 14, 16, 18, 2, 22, 25 mm * 6 jaw grinding chuck * 3 taper reducing sleeves Sk 40 x Mk 1, 2, 3, 4 * clamping nut * 20 grinding wheel chucks * 2 protective hoods * various diamond/borazon discs * Instruction Manual & Keys, Parts List, Wiring Diagram * Complete set of grinding instructions ##### Machine is partially overhauled and with electrical acceptance report! ##### !! Various measuring optics (new or used) with measuring cross sled available against additional charge!!
            max. grinding diameter 238 - 620 mm
            grinding length 190 mm
            workpiece length 380 - 940 mm
            spindle turning speed - stepless 2 - 12000 U/min
            current capacity 380 kVA
            power capacity - grinding motor 1,1 kW
            total power requirement 2,2 kW
            weight of the machine ca. 0,6 t
            Description :
            2189

            400 V, 50 Hz, with CEE plug and cable

            Colour: body pastel turquoise RAL 6034
            Stand blue-grey RAL 7031

            Motorized height adjustment, axial grinding spindle adjustment

            Machine as new !!

            * Accesories:

            * SK 40 dividing head with 24 R dividing disc
            * Graduated disc 20 R
            * Tightening screw M 16 69871
            * Spiral and relief grinding device with rack housing
            * Counter bearing with 4 tailstock centres
            * Center point with driver
            * Dressing device
            * Dressing diamond
            * Radius grinding device SK 40 complete with setting gauge
            * Steel holder for ditto
            * Support fingers with sliding blades
            * Support finger holder
            * Complete dust extraction without suction
            * Halogen light
            * Tooth support complete
            * Setting gauge
            * Plier sleeve and jacking nut and wrench
            * 35 collets 1.0 - 18.0 mm increasing by 0.5 mm
            * 1 set of SK 40 direct collets 6, 8, 10, 12, 14, 16, 18, 2, 22, 25 mm
            * 6 jaw grinding chuck
            * 3 taper reducing sleeves Sk 40 x Mk 1, 2, 3, 4
            * clamping nut
            * 20 grinding wheel chucks
            * 2 protective hoods
            * various diamond/borazon discs

            * Instruction Manual & Keys, Parts List, Wiring Diagram
            * Complete set of grinding instructions

            ##### Machine is partially overhauled and with electrical acceptance report!
            #####

            !! Various measuring optics (new or used) with measuring cross
            sled available against additional charge!!
          Datasheet
          Request / Contact
          used  Tool Grinder - Universal DECKEL S11


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04404 · Tool Grinder - Universal

          DECKEL - S11 - - 1989 -

          Technical details
          max. grinding diameter 238 - 620 mm︱grinding length 190 mm︱workpiece length 380 - 940 mm︱spindle turning speed - stepless 2 - 10000 U/min︱current capacity 380 kVA︱power capacity - grinding motor 1,1 kW︱total power requirement 2,2 kW︱weight of the machine ca. 0,6 t︱Mechanic: very good ︱Optical condition: very good ︱The machine can be viewed under current.
          Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. 1218 HS 400 V, 50 Hz, with CEE plug and cable Colour: light grey RAL 7035 Stand traffic grey RAL 7042 (new paint) axial grinding spindle adjustment Accessories: * Machine stand and carrier plate ground * Complete electrical conversion included: > new three-phase drive > new brake motor > new frequency controller > new built-in electrics touch-proof > Fi circuit breaker > EMC cables and screwed connections > new protective cables > new control panel > Emergency stop switch * Opto electronic measuring device with microscope, support arm, parking space, new Fagor digital readout and scales completely mounted and adjusted * dividing head Sk 40 with prisms and 24 R dividing disc * 1 graduated disc 14 + 22 R each * Twist and back-grinding device with rack and pinion housing * Setting gauge * Complete tooth support * pivoting support finger * LED lamp * Dust extraction device without vacuum cleaner * Univ. adjustment gauge * 10 direct collets Sk 40 6/ 8/ 10/ 12/ 14/ 16/ 18/ 20 22/ 25 mm * Collet sleeve with forcing nut * 1 set = 35 collets S 20x2 from 1.0 - 18.0 mm by 0.5 mm each * 1 taper reducing sleeve Sk 40 x Mk 1/ 2/ 3/ 4 * 3 grinding wheel chuck L 48, 35 mm * Protective cover * Exchange grinding spindle * Tool cabinet with 4 drawers * Shelves for dto. * Operating key, operating instructions, spare parts list, circuit diagram * Machine and accessories completely overhauled and with electrical test certificate! * 12 months warranty !
            max. grinding diameter 238 - 620 mm
            grinding length 190 mm
            workpiece length 380 - 940 mm
            spindle turning speed - stepless 2 - 10000 U/min
            current capacity 380 kVA
            power capacity - grinding motor 1,1 kW
            total power requirement 2,2 kW
            weight of the machine ca. 0,6 t
            Description :

            Please notice:
            We would be happy to make you a free offer. However, please understand that we
            only process inquiries with complete address details.


            1218 HS
            400 V, 50 Hz, with CEE plug and cable

            Colour: light grey RAL 7035
            Stand traffic grey RAL 7042 (new paint)

            axial grinding spindle adjustment

            Accessories:

            * Machine stand and carrier plate ground

            * Complete electrical conversion included:

            > new three-phase drive
            > new brake motor
            > new frequency controller
            > new built-in electrics touch-proof
            > Fi circuit breaker
            > EMC cables and screwed connections
            > new protective cables
            > new control panel
            > Emergency stop switch

            * Opto electronic measuring device with microscope, support arm, parking space,
            new Fagor digital readout and scales completely mounted and adjusted

            * dividing head Sk 40 with prisms and 24 R dividing disc
            * 1 graduated disc 14 + 22 R each
            * Twist and back-grinding device with rack and pinion housing
            * Setting gauge
            * Complete tooth support
            * pivoting support finger
            * LED lamp
            * Dust extraction device without vacuum cleaner
            * Univ. adjustment gauge
            * 10 direct collets Sk 40 6/ 8/ 10/ 12/ 14/ 16/ 18/ 20 22/ 25 mm
            * Collet sleeve with forcing nut
            * 1 set = 35 collets S 20x2 from 1.0 - 18.0 mm by 0.5 mm each
            * 1 taper reducing sleeve Sk 40 x Mk 1/ 2/ 3/ 4
            * 3 grinding wheel chuck L 48, 35 mm
            * Protective cover
            * Exchange grinding spindle
            * Tool cabinet with 4 drawers
            * Shelves for dto.
            * Operating key, operating instructions, spare parts list, circuit diagram

            * Machine and accessories completely overhauled and with electrical test
            certificate!
            * 12 months warranty !
          Datasheet
          Request / Contact

          Band Saw - Vertical

          used  Band Saw - Vertical MÖSSNER Record SM 320


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04675 · Band Saw - Vertical

          MÖSSNER - Record SM 320 - - 1974 -

          Technical details
          roll diameter 320 mm︱throat 310 mm︱workpiece height 230 mm︱engine output 0,9/1,3 kW︱saw band length 2.460 - 2620 mm︱table-size 500 x 500 mm︱cutting speed 25 - 750 m/min︱weight of the machine ca. 0,43 t︱Mechanic: good ︱Optical condition: good ︱The machine can be viewed under current.
          Color green 380 V, 50 Hz, with CEE plug and cable Accesories: * Swivel device * Ideal welding machine * Operation manual Machine workshop checked and rollers replaced. Machine with electrical test report!
            roll diameter 320 mm
            throat 310 mm
            workpiece height 230 mm
            engine output 0,9/1,3 kW
            saw band length 2.460 - 2620 mm
            table-size 500 x 500 mm
            cutting speed 25 - 750 m/min
            weight of the machine ca. 0,43 t
            Description :
            Color green

            380 V, 50 Hz, with CEE plug and cable

            Accesories:

            * Swivel device
            * Ideal welding machine
            * Operation manual


            Machine workshop checked and rollers replaced.

            Machine with electrical test report!
          Datasheet
          Request / Contact

          Bandsaw - Horizontal

          used  Bandsaw - Horizontal ZIMMER Z 100/R


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04552 · Bandsaw - Horizontal

          ZIMMER - Z 100/R - - 2019 -

          Technical details
          cutting diameter 105 mm︱saw band length 1140 x 13 x 0,65 mm︱cutting width 100/100x105 mm︱capacity 60 degrees: round mm︱capacity 45 degrees: flat 55 x 55 mm︱capacity 45 degrees: round 60 mm︱total power requirement 0,18 kW︱weight of the machine ca. 18 kg︱dimensions of the machine ca. ca.400 x 300 x 350 mm︱
          We must ask you to request machines from us on a daily basis in the near future. Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. Gear drive, automatic belt tension, electronically adjustable Belt speed from 20 to 100 m / min Due to the light aluminum housing, the machine is very light and therefore good mobile use.
            cutting diameter 105 mm
            saw band length 1140 x 13 x 0,65 mm
            cutting width 100/100x105 mm
            capacity 45 degrees: flat 55 x 55 mm
            capacity 45 degrees: round 60 mm
            total power requirement 0,18 kW
            weight of the machine ca. 18 kg
            dimensions of the machine ca. ca.400 x 300 x 350 mm
            Description :
            We must ask you to request machines from us on a daily basis in the near future.
            Please notice:
            We would be happy to make you a free offer. However, please understand that we
            only process inquiries with complete address details.



            Gear drive, automatic belt tension, electronically adjustable
            Belt speed from 20 to 100 m / min
            Due to the light aluminum housing, the machine is very light and therefore good
            mobile use.
          Datasheet
          Request / Contact
          used  Bandsaw - Horizontal ZIMMER Z185/R


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04495 · Bandsaw - Horizontal

          ZIMMER - Z185/R - - -

          Technical details
          cutting diameter 185 mm︱saw band length 2.080 x 20 x 0,90 mm︱cutting width 100x185 mm︱connected load frequency 230 V︱band speed 35 und 70 stufenlos m/min︱mitre joint 90° (angle-iron till) 60 °︱total power requirement 2,35 KW︱weight of the machine ca. 195 kg︱dimensions of the machine ca. 1280 x 550 x 1480 mm︱
          We must ask you to request machines from us on a daily basis in the near future. Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. An inexpensive and powerful band saw for sporadic workshop use The Zimmer Z185 / R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After the cut, the machine stops due to a safety limit switch. The lowering is continuously adjustable via a hydraulic system. The manual lifting of the saw arm after the cut can - on any Position. The saw arm remains in the desired position. * Metal band saw with stepless electronic speed regulation and automatic lowering * Selector switch for hydraulically controlled or manual belt arm lowering * Saw arm can be swiveled up to 60 ° to the right * Quick release vice * Tape guide with 8 ball bearings * Hydraulic saw band tensioning with tensioning pressure display and cut off of the band breakage * including coolant device * including machine base cabinet The Z185 / R has the following standard equipment: - hydraulic cylinders - emulsion pump - eccentric clamp - underframe - saw band The machine is fully assembled and delivered immediately ready for use Technical specifications: Motor power: 230 V / 2.35 kW Cutting speed: 30 - 75 m / min. stepless Saw band dimensions: 2.085 x 20x 0.9 mm Footprint: 550 x 1,280 x 1,480 mm Working height: 915 mm Weight: 190 kg
            cutting diameter 185 mm
            saw band length 2.080 x 20 x 0,90 mm
            cutting width 100x185 mm
            connected load frequency 230 V
            band speed 35 und 70 stufenlos m/min
            mitre joint 90° (angle-iron til. 60 °
            total power requirement 2,35 KW
            weight of the machine ca. 195 kg
            dimensions of the machine ca. 1280 x 550 x 1480 mm
            Description :
            We must ask you to request machines from us on a daily basis in the near future.

            Please notice:
            We would be happy to make you a free offer. However, please understand that we
            only process inquiries with complete address details.


            An inexpensive and powerful band saw for sporadic workshop use

            The Zimmer Z185 / R is a self-lowering saw for miter cuts from 0 ° -
            60 ° left.
            After the cut, the machine stops due to a safety limit switch.
            The lowering is continuously adjustable via a hydraulic system.
            The manual lifting of the saw arm after the cut can - on any
            Position. The saw arm remains in the desired position.

            * Metal band saw with stepless electronic speed regulation and
            automatic lowering
            * Selector switch for hydraulically controlled or manual belt arm lowering
            * Saw arm can be swiveled up to 60 ° to the right
            * Quick release vice
            * Tape guide with 8 ball bearings
            * Hydraulic saw band tensioning with tensioning pressure display and cut off of
            the band breakage
            * including coolant device
            * including machine base cabinet

            The Z185 / R has the following standard equipment:

            - hydraulic cylinders
            - emulsion pump
            - eccentric clamp
            - underframe
            - saw band

            The machine is fully assembled and delivered immediately ready for use

            Technical specifications:
            Motor power: 230 V / 2.35 kW
            Cutting speed: 30 - 75 m / min. stepless
            Saw band dimensions: 2.085 x 20x 0.9 mm
            Footprint: 550 x 1,280 x 1,480 mm
            Working height: 915 mm
            Weight: 190 kg

          Datasheet
          Request / Contact

          Dust Exhauster

          used  Dust Exhauster NILFISK ALTO Attix 33 2 H PC


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04317 · Dust Exhauster

          NILFISK ALTO - Attix 33 2 H PC - - -

          Technical details
          suction capacity - ︱volume capacity 4500 l/min︱ 38 mm︱low pressure kpa︱Electric capacity 1400 W︱voltage 220-240 V︱Weight 14,5 kg︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. 0,57x0,39x0,52 m︱Condition: new / unused
          Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. 220-240V, 50-60 / 16Hz Colour blue * Safety vacuum cleaner H class asbestos * 3-stage filtration * mobile Vacuum cleaner is supplied against additional charge of 93,90 EUR with 1 pack safety dust bag!
            suction capacity -
            volume capacity 4500 l/min
            38 mm
            Electric capacity 1400 W
            voltage 220-240 V
            Weight 14,5 kg
            dimensions of the machine ca. 0,57x0,39x0,52 m
            Description :
            Please notice:
            We would be happy to make you a free offer. However, please understand that we
            only process inquiries with complete address details.


            220-240V, 50-60 / 16Hz
            Colour blue

            * Safety vacuum cleaner H class asbestos
            * 3-stage filtration
            * mobile

            Vacuum cleaner is supplied against additional charge of 93,90 EUR with 1 pack
            safety dust bag!
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

            Profilo del commerciante: Schmeisser Werkzeugmaschinen

          Contatta Trader



            Macchine utensili Schmeisser
           Lochfelbenstrasse 2
            89312 - Gunzburg
            Germania
            08221-3689630 "> 08221-3689630
            08221-3689632
            info@schmeisser.net
            www.schmeisser.net

          Profilo di Trader

          Le macchine utensili Schmeisser vi danno il benvenuto.

          Lasciati invitare alla nostra azienda a conduzione familiare, in cui esperienza, tradizione e innovazione creano un'immagine aziendale coerente.

           

          Siamo il vostro partner competente e affidabile in foratrici, fresatrici, tornitrici e rettificatrici di alta qualità, non importa se usate o nuove, convenzionali o controllate da CNC.

           

          Le nostre macchine funzionano esattamente come noi: in modo efficiente e preciso. L'azione responsabile e coscienziosa nei confronti dei nostri partner commerciali, colleghi e dell'ambiente è la nostra priorità. Il team Schmeisser è sinonimo di competenza, onestà e correttezza. Tutto ciò ci rende un partner operativo forte e mondiale che sta mantenendo la parola.

           

          La nostra sede centrale di 2.300, situata a Guenzburg con i suoi laboratori avanzati, magazzini e spazi commerciali, offre le condizioni ottimali per soddisfare tutte le esigenze di massima soddisfazione del cliente. Il fulcro è la nostra officina principale con più di 500 m² e un sistema di magazzino a scaffali alti 2-story.

           

          .Usato e nuove macchine utensili

          .Acquisto e vendita

          .Competente, completo e di consulenza, compresi i vecchi tipi di macchine

          .Revisione parziale e generale

          .Riparazione, ispezione e pulizia

          .Pezzi di ricambio e manutenzione

          .Attrezzature personalizzate per soddisfare le tue esigenze

          .Assistenza post-vendita e assistenza

          .Elaborazione aziendale rapida e accurata

          .Acquisto di macchinari completi (ad es. In caso di liquidazioni di società)

          .Fondi

          .Soluzioni di trasporto e impostazioni della macchina

          .Dimostrazione della macchina nei nostri spazi commerciali

          .Rapporti di prova elettrici

          .Cerca e trova il servizio: troveremo la tua macchina utensile desiderata

           

          Non vediamo l'ora di incontrarti!

          Macchine utensili Schmeisser

          Proprietario: Ralf Schmeisser

           

          Lochfelbenstrasse 2

          D - 89312 Guenzburg

          Fon + 49 (0) 8221 368 96 30

          Fax + 49 (0) 8221 368 96 32

          E-mail  




          Schmeisser Werkzeugmaschinen   89312 - Günzburg Lochfelbenstrasse 2 Deutschland
          Schmeisser Werkzeugmaschinen

          Lochfelbenstrasse 2



          Contact Trader


            Schmeisser Werkzeugmaschinen
           Lochfelbenstrasse 2
            89312 - Günzburg
            Deutschland
            08221-3689630
            08221-3689632
            info@schmeisser.net
            www.schmeisser.net
            Contact person:
          Herrn Ralf Schmeisser 08221-3689630

           




          Machine category


          Bandsäge - horizontal · Bandsäge - Vertikal · Flachschleifmaschine - Horizontal · Schnellradialbohrmaschine · Staubabsaugung · Säulenbohrmaschine · Tischbohrmaschine · Werkzeugfräsmaschine - Universal · Werkzeugschleifmaschine - Universal ·