Rete europea di concessionari di macchine per stoccaggio

Bitte einen Suchbegriff eingeben - Inserisci un termine di ricerca
Categoria:
    Produttore:
      macchine:
        trader:

          Stiens Werkzeugmaschinen GmbH - Stockist for used machines

          Machinelist:


          Bar Automatic Lathe - Multi Spindle

          used  Bar Automatic Lathe - Multi Spindle INDEX MS 52 C


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8977 · Bar Automatic Lathe - Multi Spindle

          INDEX - MS 52 C - - 2007 - 840 D Powerline Siemens

          Technical details
          number of spindles 6 ︱spindle passage max. 52 mm︱turning length max. ca. 180 mm︱control 840 D Powerline Siemens︱Workingspindle: ︱number of spindles 6 pos.︱max. bar capacity 52 mm︱Max. rpm 5.000 min/-1︱power capacity 29 kW︱max. Torque 138 Nm︱Swivable-Synchronous-Spindle: ︱Max. rpm 5.000 min/-1︱power capacity 5,7 / 7,2 kW︱max. Torque 18 / 23 Nm︱Swivel Angle Synchronous-Spindle 132 °︱slide travel Z-axis 190 mm︱Backside processing 3 pos.︱Tool holder 1: ︱Number of tool stations 12 pos.︱travel -x axis 100 mm︱
          CNC - Bar Automatic Lathe Multi Spindle INDEX - MS 52 C - incl. bar loading - WTO revolver with Capto C5 (incl. 2x triple shots) - Rear processing - Tool drive - Y axis - C axis - Synchronous spindle - Polygon turning Jaw chuck Röhm on 6.2 Plier holders HSP Nordmann surveillance system Artis (2x4 channels) IEMCA SIR MS52 with tapping unit Fire extinguishing system Kraft&Baur fire damper VPN remote diagnosis UNIMAG interface Knoll chip conveyor + coolant unit KSS through the synchronous unit Hydraulic ejector Material stop control NC option double transmit NC option Scara Transformation NC option synchronous spindle polygon turning Clamping devices / tools NOT included! Incl. 4 basic holders on the back (Capto C4)
            number of spindles 6
            spindle passage max. 52 mm
            turning length max. ca. 180 mm
            control 840 D Powerline Siemens
            number of spindles 6 pos.
            max. bar capacity 52 mm
            Max. rpm 5.000 min/-1
            power capacity 29 kW
            max. Torque 138 Nm
            Max. rpm 5.000 min/-1
            power capacity 5,7 / 7,2 kW
            max. Torque 18 / 23 Nm
            Swivel Angle Synchronous-Spindle 132 °
            slide travel Z-axis 190 mm
            Backside processing 3 pos.
            Number of tool stations 12 pos.
            travel -x axis 100 mm
            Description :
            CNC - Bar Automatic Lathe Multi Spindle
            INDEX - MS 52 C

            - incl. bar loading
            - WTO revolver with Capto C5 (incl. 2x triple shots)
            - Rear processing
            - Tool drive
            - Y axis
            - C axis
            - Synchronous spindle
            - Polygon turning

            Jaw chuck Röhm on 6.2
            Plier holders HSP
            Nordmann surveillance system
            Artis (2x4 channels)
            IEMCA SIR MS52 with tapping unit
            Fire extinguishing system Kraft&Baur
            fire damper
            VPN remote diagnosis
            UNIMAG interface
            Knoll chip conveyor + coolant unit
            KSS through the synchronous unit
            Hydraulic ejector
            Material stop control
            NC option double transmit
            NC option Scara Transformation
            NC option synchronous spindle polygon turning

            Clamping devices / tools NOT included!
            Incl. 4 basic holders on the back (Capto C4)

          Datasheet
          Request / Contact

          Center Lathe

          used  Center Lathe OPTIMUM OPTIturn TH 4610 D


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8785 · Center Lathe

          OPTIMUM - OPTIturn TH 4610 D - - 2022 -

          Technical details
          greates pass round over bed 460 mm︱Swing dia. over traverse guideway 270 mm︱centre distance 1.060 mm︱centre height 230 mm︱Main spindle: ︱turning speed range - main spindle 25 - 2.000 min/-1︱power capacity - main spindel 5,5 kW︱transmission ratio 12 ︱spindle taper Camlock DIN ISO 702-2 / 6︱max. usable bar diameter 58 mm︱tool support: ︱System SWH 5-B ︱Shank diameter 25 mm︱Tailstock: ︱taper of center MK 4 ︱diameter of quill 60 mm︱quill stroke 130 mm︱axis stroke: ︱x-axis 125 mm︱z-axis 285 mm︱
          Center Lathe OPTIMUM - OPTIturn TH 4610 D - NEWMACHINE / SHOW-ROOM-MACHINE - incl. 6x Leveling-Plates SE3 - incl. Three-Jaw-Chuck 250mm (DIN ISO 702-2 No. 6) - alternative configuration available, optional and on request !
            greates pass round over bed 460 mm
            Swing dia. over traverse guidewa. 270 mm
            centre distance 1.060 mm
            centre height 230 mm
            turning speed range - main spind. 25 - 2.000 min/-1
            power capacity - main spindel 5,5 kW
            transmission ratio 12
            spindle taper Camlock DIN ISO 702-2 / 6
            max. usable bar diameter 58 mm
            System SWH 5-B
            Shank diameter 25 mm
            taper of center MK 4
            diameter of quill 60 mm
            quill stroke 130 mm
            x-axis 125 mm
            z-axis 285 mm
            Description :
            Center Lathe
            OPTIMUM - OPTIturn TH 4610 D

            - NEWMACHINE / SHOW-ROOM-MACHINE
            - incl. 6x Leveling-Plates SE3
            - incl. Three-Jaw-Chuck 250mm (DIN ISO 702-2 No. 6)
            - alternative configuration available, optional and on request !
          Datasheet
          Request / Contact
          used  Center Lathe OPTIMUM OPTIturn TX 5216


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8959 · Center Lathe

          OPTIMUM - OPTIturn TX 5216 - - 2017 -

          Technical details
          greates pass round over bed 520 mm︱Swing dia. over traverse guideway 324 mm︱centre distance 1.600 mm︱centre height 260 mm︱Main spindle: ︱turning speed range - main spindle 30 - 1.500 min/-1︱power capacity - main spindel 5,5 kW︱transmission ratio 12 ︱spindle taper Camlock DIN ISO 702-2 / 8︱max. usable bar diameter 80 mm︱tool support: ︱System SWH 7-C ︱Shank diameter 25 mm︱Tailstock: ︱taper of center MK 5 ︱diameter of quill 72 mm︱quill stroke 180 mm︱axis stroke: ︱x-axis 170 mm︱z-axis 350 mm︱
          Center Lathe OPTIMUM - OPTIturn TX 5216 - NEWMACHINE / SHOW-ROOM-MACHINE - incl. 6x Leveling-Plates SE2 - incl. Three-Jaw-Chuck 315mm (DIN ISO 702-2 No. 8) - alternative configuration available, optional and on request !
            greates pass round over bed 520 mm
            Swing dia. over traverse guidewa. 324 mm
            centre distance 1.600 mm
            centre height 260 mm
            turning speed range - main spind. 30 - 1.500 min/-1
            power capacity - main spindel 5,5 kW
            transmission ratio 12
            spindle taper Camlock DIN ISO 702-2 / 8
            max. usable bar diameter 80 mm
            System SWH 7-C
            Shank diameter 25 mm
            taper of center MK 5
            diameter of quill 72 mm
            quill stroke 180 mm
            x-axis 170 mm
            z-axis 350 mm
            Description :
            Center Lathe
            OPTIMUM - OPTIturn TX 5216

            - NEWMACHINE / SHOW-ROOM-MACHINE
            - incl. 6x Leveling-Plates SE2
            - incl. Three-Jaw-Chuck 315mm (DIN ISO 702-2 No. 8)
            - alternative configuration available, optional and on request !
          Datasheet
          Request / Contact

          CNC Lathe

          used  CNC Lathe OPTIMUM OPTIturn L 44


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8708 · CNC Lathe

          OPTIMUM - OPTIturn L 44 - - 2022 - Sinumerik 828D Siemens

          Technical details
          turning diameter max. 446 mm︱turning length 850 mm︱control Sinumerik 828D Siemens︱greates pass round over bed 446 mm︱Swing dia. over traverse guideway 240 mm︱standard turning dia. 150 mm︱Main spindle: ︱turning speed range - main spindle 10 - 3.000 min/-1︱power capacity - main spindel 16 / 7 kW︱max. Torque 80 / 33 Nm︱spindle taper DIN 55026 / A2-5 ︱spindle bore 52 mm︱max. usable bar diameter 40 (52) mm︱chucking diameter 150 mm︱turret: ︱number of toolpositions 8 pos.︱tool taper VDI 30 ︱Shank diameter 20 x 20 mm︱Drill shank diameter 25 mm︱Tailstock:
          CNC-Lathe OPTIMUM - OPTIturn L 44 - NEW MACHINE - alternative configuration available, optional and on request !
            turning diameter max. 446 mm
            turning length 850 mm
            control Sinumerik 828D Siemens
            greates pass round over bed 446 mm
            Swing dia. over traverse guidewa. 240 mm
            standard turning dia. 150 mm
            turning speed range - main spind. 10 - 3.000 min/-1
            power capacity - main spindel 16 / 7 kW
            max. Torque 80 / 33 Nm
            spindle taper DIN 55026 / A2-5
            spindle bore 52 mm
            max. usable bar diameter 40 (52) mm
            chucking diameter 150 mm
            number of toolpositions 8 pos.
            tool taper VDI 30
            Shank diameter 20 x 20 mm
            Drill shank diameter 25 mm
            Description :
            CNC-Lathe
            OPTIMUM - OPTIturn L 44

            - NEW MACHINE

            - alternative configuration available, optional and on request !
          Datasheet
          Request / Contact
          used  CNC Lathe GILDEMEISTER CTX 310 V1


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8993 · CNC Lathe

          GILDEMEISTER - CTX 310 V1 - - 2003 - 828 D Siemens

          Technical details
          turning diameter 210 mm︱turning length 580 mm︱control 828 D Siemens︱centre height 190 mm︱turning diameter over bed 330 mm︱turning dia. over face-slide 260 mm︱Main spindle: ︱turning speed range - main spindle max. 4.000 min/-1︱power capacity - main spindel 10 / 7,5 kW︱max. Torque 115 / 86 Nm︱spindle bore 68,5 mm︱usable bar diameter 52 mm︱axis stroke: ︱travel -x axis 185 mm︱travel -z axis 455 mm︱turret: ︱number of toolpositions 12 pos.︱tool taper VDI 30 ︱Shank diameter 20 x 20 mm︱Tailstock:
          CNC - Lathe GILDEMEISTER - CTX 310 V1 - incl. bar loading magazine IRCO Breuning - incl. collet chuck - 4x VDI 30 rotary holder - 6x reducing tubes
            turning diameter 210 mm
            turning length 580 mm
            control 828 D Siemens
            centre height 190 mm
            turning diameter over bed 330 mm
            turning dia. over face-slide 260 mm
            turning speed range - main spind. max. 4.000 min/-1
            power capacity - main spindel 10 / 7,5 kW
            max. Torque 115 / 86 Nm
            spindle bore 68,5 mm
            usable bar diameter 52 mm
            travel -x axis 185 mm
            travel -z axis 455 mm
            number of toolpositions 12 pos.
            tool taper VDI 30
            Shank diameter 20 x 20 mm
            Description :
            CNC - Lathe
            GILDEMEISTER - CTX 310 V1

            - incl. bar loading magazine IRCO Breuning
            - incl. collet chuck
            - 4x VDI 30 rotary holder
            - 6x reducing tubes

          Datasheet
          Request / Contact
          used  CNC Lathe GILDEMEISTER CTX 400 V1


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8949 · CNC Lathe

          GILDEMEISTER - CTX 400 V1 - - 1995 - Grundig Eltropilot

          Technical details
          turning diameter max. 300 mm︱turning length max. 600 mm︱control Grundig Eltropilot ︱standard turning dia. 200 mm︱turning diameter over bed 500 mm︱turning dia. over face-slide 290 mm︱Main spindle: ︱turning speed range - main spindle 25 - 5.000 min/-1︱power capacity - main spindel 21 kW︱max. Torque 240 Nm︱spindle diameter in front bearing 120 mm︱spindle bore 79 mm︱max. usable bar diameter 72 mm︱chucking diameter 200 mm︱spindle head 170h5 ︱axis stroke: ︱travel -x axis 212 mm︱travel -z axis 640 mm︱turret: ︱number of toolpositions 12 pos.︱
          CNC - Lathe GILDEMEISTER - CTX 400 V1 - good condition - well equipped
            turning diameter max. 300 mm
            turning length max. 600 mm
            control Grundig Eltropilot
            standard turning dia. 200 mm
            turning diameter over bed 500 mm
            turning dia. over face-slide 290 mm
            turning speed range - main spind. 25 - 5.000 min/-1
            power capacity - main spindel 21 kW
            max. Torque 240 Nm
            spindle diameter in front bearin. 120 mm
            spindle bore 79 mm
            max. usable bar diameter 72 mm
            chucking diameter 200 mm
            spindle head 170h5
            travel -x axis 212 mm
            travel -z axis 640 mm
            number of toolpositions 12 pos.
            Description :
            CNC - Lathe
            GILDEMEISTER - CTX 400 V1

            - good condition
            - well equipped


          Datasheet
          Request / Contact

          CNC Turning- and Milling Center

          used  CNC Turning- and Milling Center OPTIMUM OPTIturn S 600 CNC


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8702 · CNC Turning- and Milling Center

          OPTIMUM - OPTIturn S 600 CNC - - 2022 - Sinumerik 828D Siemens

          Technical details
          turning diameter max. 500 mm︱turning length 460 mm︱control Sinumerik 828D Siemens︱greates pass round over bed 500 mm︱Swing dia. over traverse guideway 220 mm︱standard turning dia. 215 mm︱Main spindle: ︱turning speed range - main spindle 10 - 4.000 min/-1︱power capacity - main spindel 30 / 12 kW︱max. Torque 250 / 115 Nm︱C-Axis 360 °︱spindle taper DIN 55026 / A2-6 ︱spindle bore 75 mm︱max. usable bar diameter 65 mm︱chucking diameter 215 mm︱turret: ︱number of toolpositions 12 pos.︱Number of driven toolspositions 12 pos.︱tool taper VDI 30 ︱Shank diameter 25 x 25 mm︱
          CNC-Turning- and MillingCenter OPTIMUM - OPTIturn S 600 CNC - NEW MACHINE - C-Axis - Tool-Drive - alternative configuration available, optional and on request !
            turning diameter max. 500 mm
            turning length 460 mm
            control Sinumerik 828D Siemens
            greates pass round over bed 500 mm
            Swing dia. over traverse guidewa. 220 mm
            standard turning dia. 215 mm
            turning speed range - main spind. 10 - 4.000 min/-1
            power capacity - main spindel 30 / 12 kW
            max. Torque 250 / 115 Nm
            C-Axis 360 °
            spindle taper DIN 55026 / A2-6
            spindle bore 75 mm
            max. usable bar diameter 65 mm
            chucking diameter 215 mm
            number of toolpositions 12 pos.
            Number of driven toolspositions 12 pos.
            tool taper VDI 30
            Shank diameter 25 x 25 mm
            Description :
            CNC-Turning- and MillingCenter
            OPTIMUM - OPTIturn S 600 CNC

            - NEW MACHINE
            - C-Axis
            - Tool-Drive

            - alternative configuration available, optional and on request !
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center GILDEMEISTER Sprint 32-8 linear


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8958 · CNC Turning- and Milling Center

          GILDEMEISTER - Sprint 32-8 linear - - 2021 - Fanuc 32i-B

          Technical details
          turning diameter max. 32 mm︱turning length Z2: 200 mm︱control Fanuc 32i-B ︱Main spindle: ︱Max. rpm 8.500 min/-1︱power capacity - main spindel 7,5 / 5,5 kW︱max. Torque 52 Nm︱max. usable bar diameter 32 mm︱C - Axis 360 °︱slide I: ︱x-travel 1: 70 mm︱y-travel 1: 405 mm︱z-travel 1: 100 (240) mm︱Tooling 6 / 4 pos.︱fixed tool stations 6 ︱driven statition 4 ︱outer processing 6 ︱inner processing 4 + 4 ︱Shank diameter 16 x 16 mm︱Drill shank diameter 25 mm︱
          CNC-High-Performance Turning- and Millingcenter GILDEMEISTER - Sprint 32-8 linear - TOP-Zustand! - Only 110h Spindle-Hours! - Axis: 6+2 - Main- and Subspindle - tool drive - 2 C-Axis
            turning diameter max. 32 mm
            turning length Z2: 200 mm
            control Fanuc 32i-B
            Max. rpm 8.500 min/-1
            power capacity - main spindel 7,5 / 5,5 kW
            max. Torque 52 Nm
            max. usable bar diameter 32 mm
            C - Axis 360 °
            x-travel 1: 70 mm
            y-travel 1: 405 mm
            z-travel 1: 100 (240) mm
            Tooling 6 / 4 pos.
            fixed tool stations 6
            driven statition 4
            outer processing 6
            inner processing 4 + 4
            Shank diameter 16 x 16 mm
            Drill shank diameter 25 mm
            Description :
            CNC-High-Performance Turning- and Millingcenter
            GILDEMEISTER - Sprint 32-8 linear

            - TOP-Zustand!
            - Only 110h Spindle-Hours!
            - Axis: 6+2
            - Main- and Subspindle
            - tool drive
            - 2 C-Axis
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center DMG MORI CLX 350 V6 with Gantry GX 6


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8982 · CNC Turning- and Milling Center

          DMG MORI - CLX 350 V6 with Gantry GX 6 - - 2019 - Sinumerik 840 D SL Siemens

          Technical details
          turning diameter 320 mm︱distance between spindles 780 mm︱control Sinumerik 840 D SL Siemens︱greates pass round over bed 580 mm︱Swing dia. over traverse guideway 320 mm︱Main spindle: ︱Max. rpm 5.000 min/-1︱power capacity - main spindel 16,5 / 11,0 kW︱max. Torque 168 / 112 Nm︱spindle diameter in front bearing 120 mm︱spindle bore 73 mm︱max. bar capacity 65 mm︱max. chucking diameter 250 mm︱chucking diameter 210 mm︱spindle nose A2-6 ︱C - Axis: ︱turning speeds 100 min-1︱Torque 168 Nm︱Subspindle: ︱Max. Speed Subspindle 5.000 min/-1︱
          CNC - Turning- and Millingcenter DMG MORI - CLX 350 V6 - only ca. 4.030h Spindle-hrs. - Machine preparation for DMG MORI Gantry Loader GX 6 including: - Gantry loader interface - Ceiling shutter - Special cover design - Automatic chuck flushing - Analog measuring sensor for cylinder (PXP) - DMG Gantry Loader GX 6 - Max. handling workpiece weight up to 6 kg per gripper - 2 grippers placed at an angle of 180 degrees - Ability to load and unload machined parts for the main spindle as well as for the counter spindle. - Clamping diameter range 40 - 180 mm (depends on gripper's finger). - Workpiece length: 40 - 110 mm (V6) - Air blow for grippers - Radial stroke per gripper's finger 10mm - Max. closing force 2520 N - Rotary magazine with 10 pallet station - Workpiece diameter 40 + 200 mm - Total storage height per pallet station up to 470 mm - Max. loading capacity per pallet station 70 kg
            turning diameter 320 mm
            distance between spindles 780 mm
            control Sinumerik 840 D SL Siemens
            greates pass round over bed 580 mm
            Swing dia. over traverse guidewa. 320 mm
            Max. rpm 5.000 min/-1
            power capacity - main spindel 16,5 / 11,0 kW
            max. Torque 168 / 112 Nm
            spindle diameter in front bearin. 120 mm
            spindle bore 73 mm
            max. bar capacity 65 mm
            max. chucking diameter 250 mm
            chucking diameter 210 mm
            spindle nose A2-6
            turning speeds 100 min-1
            Torque 168 Nm
            Max. Speed Subspindle 5.000 min/-1
            Description :
            CNC - Turning- and Millingcenter
            DMG MORI - CLX 350 V6

            - only ca. 4.030h Spindle-hrs.
            - Machine preparation for DMG MORI Gantry Loader GX 6 including:
            - Gantry loader interface
            - Ceiling shutter
            - Special cover design
            - Automatic chuck flushing
            - Analog measuring sensor for cylinder (PXP)

            - DMG Gantry Loader GX 6
            - Max. handling workpiece weight up to 6 kg per gripper
            - 2 grippers placed at an angle of 180 degrees
            - Ability to load and unload machined parts for the main spindle as well as for the counter spindle.
            - Clamping diameter range 40 - 180 mm (depends on gripper's finger).
            - Workpiece length: 40 - 110 mm (V6)
            - Air blow for grippers
            - Radial stroke per gripper's finger 10mm
            - Max. closing force 2520 N
            - Rotary magazine with 10 pallet station
            - Workpiece diameter 40 + 200 mm
            - Total storage height per pallet station up to 470 mm
            - Max. loading capacity per pallet station 70 kg
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center DMG MORI CLX 450 V4


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8981 · CNC Turning- and Milling Center

          DMG MORI - CLX 450 V4 - - 2017 - Sinumerik 840 D SL Siemens

          Technical details
          turning diameter 315 mm︱turning length 555 mm︱control Sinumerik 840 D SL Siemens︱greates pass round over bed 650 mm︱Swing dia. over traverse guideway 465 mm︱Main spindle: ︱Max. rpm 4.000 min/-1︱power capacity - main spindel 17,5 / 12,5 kW︱max. Torque 370 / 280 Nm︱spindle diameter in front bearing 130 mm︱spindle bore 91 mm︱max. bar capacity 80 mm︱max. chucking diameter 315 mm︱chucking diameter 315 mm︱spindle nose A2-8 ︱C-Axis 360 °︱turret: ︱number of toolpositions 12 pos.︱tool taper VDI 40 ︱driven statition 12 pos︱
          CNC - Turning- and Millingcenter DMG MORI - CLX 450 V4 - only ca. 3.200h Spindle-hrs. - Automation package: - interface for robot (DMG standard interface) - automatic door - automatic claw flushing
            turning diameter 315 mm
            turning length 555 mm
            control Sinumerik 840 D SL Siemens
            greates pass round over bed 650 mm
            Swing dia. over traverse guidewa. 465 mm
            Max. rpm 4.000 min/-1
            power capacity - main spindel 17,5 / 12,5 kW
            max. Torque 370 / 280 Nm
            spindle diameter in front bearin. 130 mm
            spindle bore 91 mm
            max. bar capacity 80 mm
            max. chucking diameter 315 mm
            chucking diameter 315 mm
            spindle nose A2-8
            C-Axis 360 °
            number of toolpositions 12 pos.
            tool taper VDI 40
            driven statition 12 pos
            Description :
            CNC - Turning- and Millingcenter
            DMG MORI - CLX 450 V4

            - only ca. 3.200h Spindle-hrs.

            - Automation package:
            - interface for robot (DMG standard interface)
            - automatic door
            - automatic claw flushing
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center DMG MORI NLX 2500 SY / 700


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8928 · CNC Turning- and Milling Center

          DMG MORI - NLX 2500 SY / 700 - - 2016 - M730 UM MAPPS CELOS

          Technical details
          turning diameter max. 356 mm︱turning length 705 mm︱control M730 UM MAPPS CELOS︱greates pass round over bed 920 mm︱Swing dia. over traverse guideway 742 mm︱Main spindle: ︱turning speed range - main spindle 4.000 min/-1︱power capacity - main spindel 18,5 / 15 kW︱spindle nose JIS A2-8 ︱spindle bore 91 mm︱max. bar capacity 80 mm︱usable bar diameter ( - ) mm︱C-Axis 0,001 °︱Subspindel: ︱Spindle speed range subspindle 6.000 min/-1︱power capacity - Sub spindle 11 / 7,5 kW︱spindle bore 73 mm︱usable bar diameter 43 mm︱C-Axis 0,001 °︱axis stroke:
          CNC - Turning- and MillingCenter DMG MORI - NLX 2500 SY / 700 - Subspindle - Tool-Drive - Y-Axis - only ca. 1,200h spindle hours - only ca. 5,220 hours of operation
            turning diameter max. 356 mm
            turning length 705 mm
            control M730 UM MAPPS CELOS
            greates pass round over bed 920 mm
            Swing dia. over traverse guidewa. 742 mm
            turning speed range - main spind. 4.000 min/-1
            power capacity - main spindel 18,5 / 15 kW
            spindle nose JIS A2-8
            spindle bore 91 mm
            max. bar capacity 80 mm
            usable bar diameter ( - ) mm
            C-Axis 0,001 °
            Spindle speed range subspindle 6.000 min/-1
            power capacity - Sub spindle 11 / 7,5 kW
            spindle bore 73 mm
            usable bar diameter 43 mm
            C-Axis 0,001 °
            Description :
            CNC - Turning- and MillingCenter
            DMG MORI - NLX 2500 SY / 700

            - Subspindle
            - Tool-Drive
            - Y-Axis

            - only ca. 1,200h spindle hours
            - only ca. 5,220 hours of operation
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center SPINNER TC 400-52 MC (*17)


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8964 · CNC Turning- and Milling Center

          SPINNER - TC 400-52 MC (*17) - - 2012 - Sinumerik 840D sl Siemens

          Technical details
          turning diameter max. 400 mm︱turning length ca. 500 mm︱control Sinumerik 840D sl Siemens︱swing diameter max. 550 mm︱Main spindle: ︱Max. rpm 5.000 min/-1︱power capacity - main spindel 18 kW︱max. Torque 113 Nm︱spindle nose A6 ︱max. usable bar diameter 52 mm︱C-Axis 360 x 0,001 °︱chucking diameter 210 mm︱Tailstock: ︱type hydr. ︱taper of center MK 4 ︱turret: ︱number of toolpositions 12 pos.︱tool taper VDI 30 DIN69880︱Number of driven toolspositions 12 pos.︱Spindle speed - driven tool stations max. 5.000 min -1︱
          CNC Turning- and Milling Center SPINNER - TC 400-52 MC - C-Axis - Tool-Drive - ShopTurn - BarFeeder
            turning diameter max. 400 mm
            turning length ca. 500 mm
            control Sinumerik 840D sl Siemens
            swing diameter max. 550 mm
            Max. rpm 5.000 min/-1
            power capacity - main spindel 18 kW
            max. Torque 113 Nm
            spindle nose A6
            max. usable bar diameter 52 mm
            C-Axis 360 x 0,001 °
            chucking diameter 210 mm
            type hydr.
            taper of center MK 4
            number of toolpositions 12 pos.
            tool taper VDI 30 DIN69880
            Number of driven toolspositions 12 pos.
            Spindle speed - driven tool stat. max. 5.000 min -1
            Description :
            CNC Turning- and Milling Center
            SPINNER - TC 400-52 MC

            - C-Axis
            - Tool-Drive
            - ShopTurn
            - BarFeeder

          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center EMCO EmcoTurn E65


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8825 · CNC Turning- and Milling Center

          EMCO - EmcoTurn E65 - - 2012 - Sinumerik 828 D Siemens

          Technical details
          greates pass round over bed max. 540 mm︱Swing dia. over traverse guideway 360 mm︱control Sinumerik 828 D Siemens︱max. turning diameter 310 mm︱max. workpiece length 520 mm︱max. bar capacity 65 mm︱centre distance 680 mm︱Main spindle: ︱turning speed range - main spindle 60 - 4.200 min/-1︱power capacity - main spindel 18 / 15 kW︱max. Torque 192 Nm︱spindle head DIN 55026 / KK6 ︱spindle diameter in front bearing 100 mm︱spindle bore 73 mm︱max. usable bar diameter 65 mm︱max. chucking diameter 254 mm︱C-Axis 0,001 °︱axis stroke: ︱x-axis 210 mm︱z-axis 610 mm︱
          CNC Turning- and Milling Center EMCO - EmcoTurn E65 - incl. Automation FMB / Yaskawa - Machine has been worked only with Aluminium-Die-Casting
            greates pass round over bed max. 540 mm
            Swing dia. over traverse guidewa. 360 mm
            control Sinumerik 828 D Siemens
            max. turning diameter 310 mm
            max. workpiece length 520 mm
            max. bar capacity 65 mm
            centre distance 680 mm
            turning speed range - main spind. 60 - 4.200 min/-1
            power capacity - main spindel 18 / 15 kW
            max. Torque 192 Nm
            spindle head DIN 55026 / KK6
            spindle diameter in front bearin. 100 mm
            spindle bore 73 mm
            max. usable bar diameter 65 mm
            max. chucking diameter 254 mm
            C-Axis 0,001 °
            x-axis 210 mm
            z-axis 610 mm
            Description :
            CNC Turning- and Milling Center
            EMCO - EmcoTurn E65

            - incl. Automation FMB / Yaskawa
            - Machine has been worked only with Aluminium-Die-Casting

          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center DMG MORI CTX 310 eco V3


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8985 · CNC Turning- and Milling Center

          DMG MORI - CTX 310 eco V3 - - 2012 - 840 D ShopTurn Siemens

          Technical details
          turning diameter max. 260 mm︱turning length 450 mm︱control 840 D ShopTurn Siemens︱centre height 190 mm︱standard turning dia. 200 mm︱turning diameter over bed 330 mm︱turning dia. over face-slide 260 mm︱Main spindle: ︱turning speed range - main spindle max. 5.000 min/-1︱power capacity - main spindel 16,5 / 11 kW︱max. Torque 166,5 Nm︱usable bar diameter 51 mm︱chucking diameter 210 mm︱C-Axis 0,04 °︱axis stroke: ︱travel -x axis 160 mm︱travel -z axis 450 mm︱turret: ︱number of toolpositions 12 pos.︱tool taper VDI 30
          CNC - Turning- and Millingcenter DMG MORI - CTX 310 eco V3 - only 764 spindle hours - Three-jaw chuck D210 (AutoGrip 3H-08) - 5x driven tools: 3x WTO axial, 1x WTO axially offset, 1x WTO radial - 11x WTO stakes - Sandvik cassette holder (stab insert) - 1x thread compensating chuck (size 2) - 10x thread changing inserts - WP drills D12 and D25 - 1x collet set ER25 2-16 - various indexable inserts (without holders)
            turning diameter max. 260 mm
            turning length 450 mm
            control 840 D ShopTurn Siemens
            centre height 190 mm
            standard turning dia. 200 mm
            turning diameter over bed 330 mm
            turning dia. over face-slide 260 mm
            turning speed range - main spind. max. 5.000 min/-1
            power capacity - main spindel 16,5 / 11 kW
            max. Torque 166,5 Nm
            usable bar diameter 51 mm
            chucking diameter 210 mm
            C-Axis 0,04 °
            travel -x axis 160 mm
            travel -z axis 450 mm
            number of toolpositions 12 pos.
            tool taper VDI 30
            Description :
            CNC - Turning- and Millingcenter
            DMG MORI - CTX 310 eco V3

            - only 764 spindle hours
            - Three-jaw chuck D210 (AutoGrip 3H-08)
            - 5x driven tools: 3x WTO axial, 1x WTO axially offset, 1x WTO radial
            - 11x WTO stakes
            - Sandvik cassette holder (stab insert)
            - 1x thread compensating chuck (size 2)
            - 10x thread changing inserts
            - WP drills D12 and D25
            - 1x collet set ER25 2-16
            - various indexable inserts (without holders)
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center GILDEMEISTER Sprint 42 linear


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8957 · CNC Turning- and Milling Center

          GILDEMEISTER - Sprint 42 linear - - 2011 - Fanuc 160i SLIMline

          Technical details
          turning diameter max. 42 mm︱turning length Z2: 320 mm︱control Fanuc 160i SLIMline︱Main spindle: ︱Max. rpm 6.500 min/-1︱power capacity - main spindel 7,5 / 5,5 kW︱max. Torque 37,5 Nm︱max. usable bar diameter 42 mm︱C - Axis 360 °︱slide I: ︱x-travel 1: 65 mm︱y-travel 1: 350 mm︱z-travel 1: 120 mm︱Tooling 6 / 4 pos.︱fixed tool stations 6 ︱driven statition 4 ︱outer processing 6 ︱inner processing 4 ︱Shank diameter 16 x 16 mm︱Drill shank diameter 32 mm︱
          CNC-High-Performance Turning- and Millingcenter GILDEMEISTER - Sprint 42 linear - Axis: 6+2 - Main- and Subspindle - tool drive - 2 C-Axis
            turning diameter max. 42 mm
            turning length Z2: 320 mm
            control Fanuc 160i SLIMline
            Max. rpm 6.500 min/-1
            power capacity - main spindel 7,5 / 5,5 kW
            max. Torque 37,5 Nm
            max. usable bar diameter 42 mm
            C - Axis 360 °
            x-travel 1: 65 mm
            y-travel 1: 350 mm
            z-travel 1: 120 mm
            Tooling 6 / 4 pos.
            fixed tool stations 6
            driven statition 4
            outer processing 6
            inner processing 4
            Shank diameter 16 x 16 mm
            Drill shank diameter 32 mm
            Description :
            CNC-High-Performance Turning- and Millingcenter
            GILDEMEISTER - Sprint 42 linear

            - Axis: 6+2
            - Main- and Subspindle
            - tool drive
            - 2 C-Axis
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center GILDEMEISTER Sprint 32 linear


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8956 · CNC Turning- and Milling Center

          GILDEMEISTER - Sprint 32 linear - - 2010 - Fanuc 160i SLIMline

          Technical details
          turning diameter max. 32 mm︱turning length Z2: 320 mm︱control Fanuc 160i SLIMline︱Main spindle: ︱Max. rpm 8.000 min/-1︱power capacity - main spindel 7,5 / 5,5 kW︱max. Torque 24 Nm︱max. usable bar diameter 32 mm︱C - Axis 360 °︱slide I: ︱x-travel 1: 65 mm︱y-travel 1: 350 mm︱z-travel 120 mm︱Tooling 6 / 4 pos.︱fixed tool stations 6 ︱driven statition 4 ︱outer processing 6 ︱inner processing 4 ︱Shank diameter 16 x 16 mm︱Drill shank diameter 32 mm︱
          CNC-High-Performance Turning- and Millingcenter GILDEMEISTER - Sprint 32 linear - Axis: 6+2 - Main- and Subspindle - tool drive - 2 C-Axis
            turning diameter max. 32 mm
            turning length Z2: 320 mm
            control Fanuc 160i SLIMline
            Max. rpm 8.000 min/-1
            power capacity - main spindel 7,5 / 5,5 kW
            max. Torque 24 Nm
            max. usable bar diameter 32 mm
            C - Axis 360 °
            x-travel 1: 65 mm
            y-travel 1: 350 mm
            z-travel 120 mm
            Tooling 6 / 4 pos.
            fixed tool stations 6
            driven statition 4
            outer processing 6
            inner processing 4
            Shank diameter 16 x 16 mm
            Drill shank diameter 32 mm
            Description :
            CNC-High-Performance Turning- and Millingcenter
            GILDEMEISTER - Sprint 32 linear

            - Axis: 6+2
            - Main- and Subspindle
            - tool drive
            - 2 C-Axis
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center GILDEMEISTER CTX 310 V6


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8869 · CNC Turning- and Milling Center

          GILDEMEISTER - CTX 310 V6 - - 2008 - Fanuc 32 iS

          Technical details
          turning diameter max. 246 mm︱turning length max. 445 mm︱control Fanuc 32 iS ︱distance between spindles 665 mm︱centre height 365 mm︱greates pass round over bed 500 mm︱Swing dia. over traverse guideway 375 mm︱standard turning dia. 170 - 210 mm︱Main spindle: ︱Max. speed main spindle 6.000 min/-1︱power capacity - main spindel 12 kW︱max. Torque 115 Nm︱spindle bearing diameter 100 mm︱spindle bore 73 mm︱max. usable bar diameter 50 mm︱C-Axis 0,001 °︱spindle head FL 140 h5 ︱max. chucking diameter 170 - 210 mm︱chucking diameter ( - ) mm︱Subspindle:
          CNC-Turning- and Millingcenter GILDEMEISTER - CTX 310 V6 - Main- and Subspindle - Tool-Drive - 2 C-Axis - Y-Axis - Bar-feeder
            turning diameter max. 246 mm
            turning length max. 445 mm
            control Fanuc 32 iS
            distance between spindles 665 mm
            centre height 365 mm
            greates pass round over bed 500 mm
            Swing dia. over traverse guidewa. 375 mm
            standard turning dia. 170 - 210 mm
            Max. speed main spindle 6.000 min/-1
            power capacity - main spindel 12 kW
            max. Torque 115 Nm
            spindle bearing diameter 100 mm
            spindle bore 73 mm
            max. usable bar diameter 50 mm
            C-Axis 0,001 °
            spindle head FL 140 h5
            max. chucking diameter 170 - 210 mm
            chucking diameter ( - ) mm
            Description :
            CNC-Turning- and Millingcenter
            GILDEMEISTER - CTX 310 V6

            - Main- and Subspindle
            - Tool-Drive
            - 2 C-Axis
            - Y-Axis
            - Bar-feeder
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center GILDEMEISTER Twin 65 Y


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8983 · CNC Turning- and Milling Center

          GILDEMEISTER - Twin 65 Y - - 2006 - Sinumerik 840 D pl Siemens

          Technical details
          turning diameter 100 mm︱turning length Z: max. 345 mm︱control Sinumerik 840 D pl Siemens︱swing diameter max. 145 mm︱distance between spindles 580 mm︱Main spindle: ︱turning speed range - main spindle 25 - 5.600 min/-1︱power capacity - main spindel 20 / 15 kW︱max. Torque 160 / 120 Nm︱clamping chuck diameter max. 140 mm︱spindle nose 140h5 ︱max. bar capacity 65 mm︱C-Axis 360° °︱Subspindel: ︱Spindle speed range subspindle 25 - 5.600 min/-1︱power capacity - Sub spindle 20 / 15 kW︱max. Torque 160 /120 Nm︱clamping chuck diameter max. 140 mm︱spindle nose 140h5 ︱max. bar capacity 65 mm︱
          CNC - Turning- and MillingCenter GILDEMEISTER - Twin 65 Y - Main- and Subspindle - two turrets - 2 C-Axis - Y-Axis - tool-drive - well equipped! - Bar loading magazine Breuning Irco Simag 70.1
            turning diameter 100 mm
            turning length Z: max. 345 mm
            control Sinumerik 840 D pl Siemens
            swing diameter max. 145 mm
            distance between spindles 580 mm
            turning speed range - main spind. 25 - 5.600 min/-1
            power capacity - main spindel 20 / 15 kW
            max. Torque 160 / 120 Nm
            clamping chuck diameter max. 140 mm
            spindle nose 140h5
            max. bar capacity 65 mm
            C-Axis 360° °
            Spindle speed range subspindle 25 - 5.600 min/-1
            power capacity - Sub spindle 20 / 15 kW
            max. Torque 160 /120 Nm
            clamping chuck diameter max. 140 mm
            spindle nose 140h5
            max. bar capacity 65 mm
            Description :
            CNC - Turning- and MillingCenter
            GILDEMEISTER - Twin 65 Y

            - Main- and Subspindle
            - two turrets
            - 2 C-Axis
            - Y-Axis
            - tool-drive
            - well equipped!

            - Bar loading magazine Breuning Irco Simag 70.1

          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center GILDEMEISTER Sprint 42-8 linear


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8885 · CNC Turning- and Milling Center

          GILDEMEISTER - Sprint 42-8 linear - - 2006 - 160i-TB Fanuc

          Technical details
          turning diameter max. 42 mm︱turning length ca. 120 mm︱control 160i-TB Fanuc︱Main spindle: ︱max. usable bar diameter 42 mm︱Max. speed main spindle 6.500 min/-1︱power capacity - main spindel 7,5 / 5,5 kW︱C-Axis 0,001 °︱Subspindle: ︱max. usable bar diameter 42 mm︱Max. Speed Subspindle 6.500 min/-1︱power capacity - Sub spindle 7,5 / 5,5 kW︱C-Axis 0,001 °︱slide I: ︱x-axis 65 mm︱y-axis 350 mm︱z-axis 120 mm︱rapid traverse 30 m/min︱Accelaration 5/10 m/s²︱feed power max. 350 daN︱
          CNC-Turning- and Millingcenter GILDEMEISTER - Sprint 42-8 linear - 8-Axis (6 linear- and 2 C-Axis) - incl. Bar-Feeder
            turning diameter max. 42 mm
            turning length ca. 120 mm
            control 160i-TB Fanuc
            max. usable bar diameter 42 mm
            Max. speed main spindle 6.500 min/-1
            power capacity - main spindel 7,5 / 5,5 kW
            C-Axis 0,001 °
            max. usable bar diameter 42 mm
            Max. Speed Subspindle 6.500 min/-1
            power capacity - Sub spindle 7,5 / 5,5 kW
            C-Axis 0,001 °
            x-axis 65 mm
            y-axis 350 mm
            z-axis 120 mm
            rapid traverse 30 m/min
            Accelaration 5/10 m/s²
            feed power max. 350 daN
            Description :
            CNC-Turning- and Millingcenter
            GILDEMEISTER - Sprint 42-8 linear

            - 8-Axis (6 linear- and 2 C-Axis)
            - incl. Bar-Feeder
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center GILDEMEISTER CTX 620 linear V3


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8888 · CNC Turning- and Milling Center

          GILDEMEISTER - CTX 620 linear V3 - - 2006 - Sinumerik 840 D pl Siemens

          Technical details
          turning diameter max. 500 mm︱turning length max. 1.000 mm︱control Sinumerik 840 D pl Siemens︱max. swing diameter 800 mm︱axis stroke: ︱x-axis 382 mm︱z-axis 1.100 mm︱Main spindle: ︱turning speed range - main spindle 20 - 2.500 min/-1︱power capacity - main spindel 43 / 33 kW︱max. Torque 2.200 Nm︱spindle diameter in front bearing 180 mm︱max. usable bar diameter 121 mm︱spindle nose 300h5 ︱max. chucking diameter 500 mm︱chucking diameter 500 mm︱turret: ︱number of toolpositions 12 + 6 pos.︱driven statition 12 pos︱Shank diameter 50 mm︱
          CNC-Turning- and Millingcenter GILDEMEISTER - CTX 620 linear V3 - Tool-Drive - Tailstock
            turning diameter max. 500 mm
            turning length max. 1.000 mm
            control Sinumerik 840 D pl Siemens
            max. swing diameter 800 mm
            x-axis 382 mm
            z-axis 1.100 mm
            turning speed range - main spind. 20 - 2.500 min/-1
            power capacity - main spindel 43 / 33 kW
            max. Torque 2.200 Nm
            spindle diameter in front bearin. 180 mm
            max. usable bar diameter 121 mm
            spindle nose 300h5
            max. chucking diameter 500 mm
            chucking diameter 500 mm
            number of toolpositions 12 + 6 pos.
            driven statition 12 pos
            Shank diameter 50 mm
            Description :
            CNC-Turning- and Millingcenter
            GILDEMEISTER - CTX 620 linear V3

            - Tool-Drive
            - Tailstock
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center GILDEMEISTER CTX 320 linear V5


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8342 · CNC Turning- and Milling Center

          GILDEMEISTER - CTX 320 linear V5 - - 2005 - 180i TB MG Fanuc

          Technical details
          turning diameter max. 400 mm︱turning length 600 mm︱control 180i TB MG Fanuc︱greates pass round over bed 500 mm︱Swing dia. over traverse guideway 300 mm︱centre distance 615 mm︱Main spindle: ︱turning speed range - main spindle 20 - 6.000 min/-1︱power capacity - main spindel 16 kW︱max. Torque 155 Nm︱spindle diameter in front bearing 100 mm︱spindle bore 68,5 mm︱max. bar capacity 52 mm︱usable bar diameter 52 mm︱spindle nose 140H5 ︱max. chucking diameter 200 mm︱C-Axis 0,001 °︱Subspindel: ︱Spindle speed range subspindle 20 - 6.000 min/-1︱power capacity - Sub spindle 7,5 kW︱
          CNC - Turning- and MillingCenter GILDEMEISTER - CTX 320 linear V5 - Main- and Subspindle - tool-drive - C-Axis - Manual Guide - Irco Breuning Profimat - WITHOUT tools
            turning diameter max. 400 mm
            turning length 600 mm
            control 180i TB MG Fanuc
            greates pass round over bed 500 mm
            Swing dia. over traverse guidewa. 300 mm
            centre distance 615 mm
            turning speed range - main spind. 20 - 6.000 min/-1
            power capacity - main spindel 16 kW
            max. Torque 155 Nm
            spindle diameter in front bearin. 100 mm
            spindle bore 68,5 mm
            max. bar capacity 52 mm
            usable bar diameter 52 mm
            spindle nose 140H5
            max. chucking diameter 200 mm
            C-Axis 0,001 °
            Spindle speed range subspindle 20 - 6.000 min/-1
            power capacity - Sub spindle 7,5 kW
            Description :
            CNC - Turning- and MillingCenter
            GILDEMEISTER - CTX 320 linear V5

            - Main- and Subspindle
            - tool-drive
            - C-Axis
            - Manual Guide
            - Irco Breuning Profimat
            - WITHOUT tools

          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center GILDEMEISTER CTX 420 linear V6


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8397 · CNC Turning- and Milling Center

          GILDEMEISTER - CTX 420 linear V6 - - 2004 - iT Turn Plus Heidenhain

          Technical details
          turning diameter max. 560 mm︱turning length 600 mm︱control iT Turn Plus Heidenhain︱greates pass round over bed 680 mm︱Swing dia. over traverse guideway 565 mm︱standard turning dia. 250 - 325 mm︱centre distance 635 mm︱Main spindle: ︱turning speed range - main spindle 25 - 5.000 min/-1︱power capacity - main spindel 25 / 35 kW︱max. Torque 370 Nm︱spindle nose 170H5 ︱spindle bearing diameter 120 mm︱spindle bore 79 mm︱max. bar capacity 68 mm︱max. chucking diameter 250 mm︱chucking diameter 200 mm︱C-Axis 0,025° / 360 °︱Subspindel: ︱Spindle speed range subspindle 35 - 7.000 min/-1︱
          CNC Turning- and MillingCenter GILDEMEISTER - CTX 420 linear V6 - Main and subspindle - Tool drive - C axis / Y axis
            turning diameter max. 560 mm
            turning length 600 mm
            control iT Turn Plus Heidenhain
            greates pass round over bed 680 mm
            Swing dia. over traverse guidewa. 565 mm
            standard turning dia. 250 - 325 mm
            centre distance 635 mm
            turning speed range - main spind. 25 - 5.000 min/-1
            power capacity - main spindel 25 / 35 kW
            max. Torque 370 Nm
            spindle nose 170H5
            spindle bearing diameter 120 mm
            spindle bore 79 mm
            max. bar capacity 68 mm
            max. chucking diameter 250 mm
            chucking diameter 200 mm
            C-Axis 0,025° / 360 °
            Spindle speed range subspindle 35 - 7.000 min/-1
            Description :
            CNC Turning- and MillingCenter
            GILDEMEISTER - CTX 420 linear V6

            - Main and subspindle
            - Tool drive
            - C axis / Y axis

          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center GILDEMEISTER CTX 320 linear V6


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8552 · CNC Turning- and Milling Center

          GILDEMEISTER - CTX 320 linear V6 - - 2004 - iT Plus Heidenhain

          Technical details
          turning diameter max. 400 mm︱turning length 600 mm︱control iT Plus Heidenhain︱greates pass round over bed 500 mm︱Swing dia. over traverse guideway 300 mm︱centre distance 615 mm︱Main spindle: ︱turning speed range - main spindle 20 - 6.000 min/-1︱power capacity - main spindel 16 kW︱max. Torque 155 Nm︱max. usable bar diameter 65 mm︱spindle nose 140H5 ︱chucking diameter 170 / 210 mm︱C-Axis 0,001 °︱Subspindel: ︱Spindle speed range subspindle 20 - 6.000 min/-1︱power capacity - Sub spindle 7,5 kW︱max. Torque 48 Nm︱spindle diameter in front bearing 75 mm︱spindle bore 37 mm︱
          CNC - Turning- and MillingCenter GILDEMEISTER - CTX 320 linear V6 - Main- and Subspindle - tool-drive - C-Axis - Y-Axis - well equipped - regulary been checked
            turning diameter max. 400 mm
            turning length 600 mm
            control iT Plus Heidenhain
            greates pass round over bed 500 mm
            Swing dia. over traverse guidewa. 300 mm
            centre distance 615 mm
            turning speed range - main spind. 20 - 6.000 min/-1
            power capacity - main spindel 16 kW
            max. Torque 155 Nm
            max. usable bar diameter 65 mm
            spindle nose 140H5
            chucking diameter 170 / 210 mm
            C-Axis 0,001 °
            Spindle speed range subspindle 20 - 6.000 min/-1
            power capacity - Sub spindle 7,5 kW
            max. Torque 48 Nm
            spindle diameter in front bearin. 75 mm
            spindle bore 37 mm
            Description :
            CNC - Turning- and MillingCenter
            GILDEMEISTER - CTX 320 linear V6

            - Main- and Subspindle
            - tool-drive
            - C-Axis
            - Y-Axis
            - well equipped
            - regulary been checked
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center MORI SEIKI SL 303-B MC / 700


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8989 · CNC Turning- and Milling Center

          MORI SEIKI - SL 303-B MC / 700 - - 2004 - MSG 501

          Technical details
          turning diameter max. 500 mm︱turning length max. 709 mm︱control MSG 501 ︱greates pass round over bed max. 715 mm︱standard turning dia. 290 mm︱centre distance 744 mm︱max. usable bar diameter 89 mm︱Main spindle: ︱turning speed range - main spindle 25 - 2.500 min/-1︱power capacity - main spindel 22 / 18,5 kW︱spindle nose JIS A2-8 ︱spindle bore 105 mm︱max. usable bar diameter 89 mm︱C - Axis 0,001 °︱spindle bearing diameter 160 mm︱chucking diameter 250 + 315 mm︱axis stroke: ︱x-axis 250 (210+40) mm︱z-axis 800 mm︱C-Axis 360 °︱
          CNC-Turning- and MillingCenter MORI SEIKI - SL 303-B MC / 700
            turning diameter max. 500 mm
            turning length max. 709 mm
            control MSG 501
            greates pass round over bed max. 715 mm
            standard turning dia. 290 mm
            centre distance 744 mm
            max. usable bar diameter 89 mm
            turning speed range - main spind. 25 - 2.500 min/-1
            power capacity - main spindel 22 / 18,5 kW
            spindle nose JIS A2-8
            spindle bore 105 mm
            max. usable bar diameter 89 mm
            C - Axis 0,001 °
            spindle bearing diameter 160 mm
            chucking diameter 250 + 315 mm
            x-axis 250 (210+40) mm
            z-axis 800 mm
            C-Axis 360 °
            Description :
            CNC-Turning- and MillingCenter
            MORI SEIKI - SL 303-B MC / 700
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          •   
          •   

            Profilo del commerciante: Stiens Werkzeugmaschinen GmbH

          Contatta Trader



            Stiens Machine Tools GmbH
           Medio 92
            59302 - Olde
            Germania
            + 49 252283490 "> + 49 252283490
            (0049) - 2522 - 8349-20
            info@stiens.de
            www.stiens.de

          Profilo di Trader

          Abbiamo ottenuto riconoscimenti nazionali e internazionali nel settore delle macchine CNC

          Con crescente successo, ci siamo affermati come un'azienda di macchine CNC di medie dimensioni per i mercati nazionali e internazionali. Se hai una macchina troppe o troppo poche: parla con noi e saremo lieti di aiutarti. Dalla nostra fondazione in 1988, la nostra attività nel settore dei macchinari usati è sinonimo di qualità. Assistiamo molti clienti di lunga data e una clientela in continua crescita a livello regionale e internazionale. L'orientamento al cliente e la vicinanza al cliente sono le nostre ricette per il successo. I nostri rappresentanti impegnati e altamente motivati ​​sono al tuo servizio.

          Stiens Machine Tools Handelsgesellschaft mbH
          Medio 92
          59302 Oelde - Germania

            +49 2522 83 49 0
           +49 2522 83 49 20

           info [@] Stiens [.] com




          Stiens Werkzeugmaschinen GmbH   59302 - Oelde Mittelweg 92 Deutschland
          Stiens Werkzeugmaschinen GmbH

          Mittelweg 92



          Contact Trader


            Stiens Werkzeugmaschinen GmbH
           Mittelweg 92
            59302 - Oelde
            Deutschland
            +49 252283490
            (0049) - 2522 - 8349-20
            info@stiens.de
            www.stiens.de
            Contact person:

           




          Machine category


          Bandsäge · Bandsäge - Vertikal · Bandsägeautomat - Horizontal · Bearbeitungszentrum - Horizontal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Bohr- und Fräsmaschine · CNC Dreh- und Fräszentrum · CNC Drehmaschine · Drehmaschine - zyklengesteuert · Flachschleifmaschine · Fräsmaschine - Universal · Hochgeschwindigkeitsfräsmaschine · Karusselldrehmaschine - Einständer · Konsolfräsmaschine - universal · Langdrehautomat · Laserschneidmaschine · Leit- und Zugspindeldrehmaschine · Mehrspindelstangenautomat · Messmaschine · Meßgerät · Portal - Bearbeitungszentrum · Portalfräsmaschine · Rotorenschleifmaschine · Rundschleifmaschine - Außen · Spritzgiessmaschine bis 1000 KN · Stangenzuführung · Säulenbohrmaschine · Werkzeug Voreinstellgerät · Werkzeugfräsmaschine - Universal ·