Milling machines
Machinelist: Milling machines
Planer-Type Milling M/C - Double Column
- MS Maschinenhandel GmbH
- Unterdorf 34
- 6532 Ladis
- Österreich
-
+43 547221907
+43 54722190722 -
info@ms-maschinen.at
www.ms-maschinen.at
#2034-151 · Planer-Type Milling M/C - Double Column
WALDRICH-COBURG - Valutec - - 2005 - SIEMENS 840D
Technical details
- ATMH Werkzeugmaschinenhandel GmbH
- Scharpenbergerstr.96-98
- 58256 Ennepetal
- Deutschland
-
+49 (0) 2333 / 403 43 70
+49 (0) 2333 / 403 43 75 -
info@atmh.de
www.atmh.de
#2065-S1901 · Planer-Type Milling M/C - Double Column
WALDRICH-COBURG - MULTITEC 2500 AP - - 2001 - Siemens Sinumerik 840 D
Technical details
Universal portal milling machine Pallet system: 2-fold traverse paths Pallet carrier longitudinal (X-axis): 4000mm Milling and drilling unit horizontal (Y-axis): 3500mm Spindle slide vertical (Z-axis): 1500mm Transom vertical (W axis): 1500mm Passage width between stands: 2500mm Headroom between pallet and spindle nose: 2500mm adjustment speeds X,Y,Z axis: 0 - 60000 mm/min W axis: 0 - 6000 mm/min Milling and drilling unit: M4 Drive power: 45kW Speed ??range of the milling and drilling spindle 1st stage: 5-1300 rpm 2nd stage: 23-6000 rpm Rated speed: 330 min-1 Max.torque: 1250Nm Cross-section of the spindle slide: 400 x 400 mm pallet system Number of pallets: 3 Clamping dimensions of the pallets: 2000 x 3000mm T-slots converted: 28mm H8 Maximum workpiece weight: 10000kg Pallets are changed: manually using an indoor crane Number of setup stations: 3 main dimension Passage width b between the uprights: 2500mm Passage height h between pallet and spindle nose: 2500mm Total length L of the machine (without pallet system): approx. 10000mm Total width B of the machine (without pallet system): approx. 9770mm Total height H of the machine above ground: approx. 6650mm Accessories and Options - Renishaw probe - Automatic changing system for tools and processing units manipulation - Double gripper for changing tools in the machining units - Double gripper for changing processing units in de milling and drilling unit - Tool weight max. 50kg - Tool collar diameter 97.5 - 125mm - max. weight for processing units 750kg shelf magazine - 4 shelves - 192 stations for tools - 4 stations for machining units - Tool holder ISO 50A according to DIN 69871 - Distance from station to station 140mm - max. tool diameter with occupancy of each station 135mm - max. standard tool diameter 250mm / with direct feed via shuttle 315mm / max. tool length standard: 400mm / when stored in the top row of shelves (16 stations in the shelf): 600 mm - Follow-up care - Main time parallel storage and retrieval or inspiration from Tools and processing units - Loading station with PC for entering, editing and managing tool data - Electrical equipment including motors and connection cables - Protective grille with automatic door to the working area - Operating instructions / documentation - Machine parameters on storage medium
Datasheet
Request / Contact
- MS Maschinenhandel GmbH
- Unterdorf 34
- 6532 Ladis
- Österreich
-
+43 547221907
+43 54722190722 -
info@ms-maschinen.at
www.ms-maschinen.at
#2034-29 · Planer-Type Milling M/C - Double Column
WALDRICH-COBURG - POWERTEC 4000 AP - - 1995 - SIEMENS 840C
Technical details
ATTACHMENTS angular milling head yes autom. tool clamping yes ball spindles yes guideway covers yes coolant unit yes high pressure cooling syst. (through spindle) yes closed cabin yes chip conveyor yes TECHNICAL DESCRIPTION PLANER TYPE MACHINING CENTER - EACH WITH 3 PALLETS 9000 x 3000 mm: - Tool changer with 420 tools - Head pick-up system - Video monitoring via camera - High pressure lubrication unit for inner cooling 70bar AVAILABLE HEAD UNITS: - Fixed angle head HS800C600 105 Kw 600 long - Fixed angle head HSD350C850 50 Kw 850 long - Fixed angle head HSD 40C880 12 Kw 880 long - Fixed angle head HSD 190C1000 30 Kw 1000 long - Vertical spindle unit VS800C 105 Kw 900 long - Universal spindle unit USIO40C 20 Kw B-axis rotatable at 1° at a time - Angle spindle unit SO800C905 - 22,5° fix - Angle spindle unit HSE1200CS -25° fix - Universal spindle unit (fork milling) USP475C 75 Kw 1/2° Hirth One additional drilling extension SE 350C plus 1 SE500C. DESCRIPTION OF CONDITION In 2011/2012 these 2 identical machines were retrofitted The milling length was extended to 14meters and an automatic changing system for table pallets was installed. Both machines can be seen under power by prior appointment.
- SK Maschinen-Service GmbH
- Tackweg 4
- 47918 Tönisvorst
- Deutschland
-
02151 79350
02151 793535 -
info@sk-maschinen.de
www.sk-maschinen.de
#1038-80481 · Planer-Type Milling M/C - Double Column
WALDRICH-COBURG - 20-10 FP 320 NC - - 1989 / retrofit 2007 - SIEMENS 840D Solutionline
Technical details
IKZ (not for heads) attachment head: clamping automactically high-speed spindle 35 kW, nmax. 2.400 rpm spindle extension 650 mm angular milling head 4 x 90°- short L = 475 mm angular milling head 4 x 90°- long L:= 1.400 mm
- Knops Werkzeugmaschinen
- Konrad-Zuse-Straße 5
- 40789 Monheim
- Deutschland
-
02173 - 39494-0
02173 - 39494-29 -
maschinen@knops.de
www.knops.de
#1022-E05621 · Planer-Type Milling M/C - Double Column
WALDRICH-COBURG - 14-10 FP200NC/3,5m - - 1986/2009 retrofit - Heidenhain iTNC 530
Technical details
Retrofit: 2009 CNC control Heidenhain iTNC 530 The angle milling head is adjusted via the NC program automatically. In this case, the head is treated as a C axis and represents the angles accordingly (to the degree) fully automatically. X-axis (longitudinal adjustment of the table) Lubrication: Hydrostatic lubrication Travel distance: 6200 mm Maximum feed speed: 15 m / min Direct distance measuring system from Heidenhain Y-axis (transverse adjustment of the milling support) Lubrication: Hydrostatic lubrication Travel distance: 3200 mm Maximum feed speed: 15 m / min Direct distance measuring system from Heidenhain Z-axis (vertical adjustment of the milling spindle slide) Travel distance: 1000 mm Maximum feed rate: 17.5 m / min Direct distance measuring system from Heidenhain W-axis Drive via two ball screws (D = 100 mm / P = 20 mm) with one each Low-backlash planetary gearbox and hydraulic counterbalance. Travel distance: 1500 mm Maximum feed rate: 10 m / min Direct distance measuring system from Heidenhain Passage between columns without stand covers: 2500 mm with stand covers: 2350 mm Passage table to portal: 2000 mm (possibly 2250) mm Pallet size: 2000 x 3500 mm T-slots: Longitudinal: 28 mm / Cross: 28 mm Distance T-slots: Longitudinal: 125mm / Cross: 125mm Max. Workpiece weight: 20,000 kg Pallet carrier width (undercounter): 1750 mm Pallet carrier over corridor: approx. 20 mm Upper edge of pallet over corridor: 400 mm Main spindle drive Speed ??range: 5-2000 1 / min Tool holder: SK 50 Gear stage: 4 Motor power 78 kW (25% ED) additional units 4.1 High Speed ??- Front Mount 15 kW (SLVL 30 SZ / 1: 3) With oil circulation cooling and internal coolant supply * Tool holder: SK50 according to DIN69 871 part 1 Hydraulic tool clamp with tightening bolt according to DIN 69 872 form AD Gear ratio: i = 3: 1 Max. Drive speed: n1 = 1666 1 / min Max. Output speed: n2 = 5000 1 / min Max. Output torque: M = 300 Nm Max. Milling power: P = 15 kW Angle milling head 25 kW (WFMD 150 SZ) Automatically swiveling via main spindle Clamping via Hirth serration; gradual division Tool holder: SK50 according to DIN69 871 part 1 Hydraulic tool clamp with tightening bolt according to DIN 69 872 form AD Internal coolant supply * Gear ratio: i = 2: 1 Max. Drive speed: n1 = 600 1 / min Max. Output speed: n2 = 600 1 / min Max. Output torque: M = 1500 Nm Max. Milling power: P = 25 kW Angle milling head 18 kW (WFMD 70 SZ) With oil circulation cooling and internal coolant supply * Automatically swiveling via main spindle Clamping via Hirth serration; gradual division Tool holder: SK50 according to DIN69 871 part 1 Hydraulic tool clamp with tightening bolt according to DIN 69 872 form AD Gear ratio: i = 2 Max. Drive speed: n1 = 1800 1 / min Max. Output speed: n2 = 3600 1 / min Max. Output torque: M = 700 Nm Max. Milling power: P = 18 kW Pallet changing system Semi-automatic pallet changing system Tool changer Capacity of the tool magazine: 300 pieces SK50 Intermediate buffer with 4 tool slots Cutting and cooling equipment Volume of coolant tank: V = 3000 l Wastewater treatment via belt filter system Internal coolant supply (IKZ) with blown air through spindle center High pressure pump (screw pump) with adjustable pressure Pressure range: P = 5 - 60 bar Flow rate: Qmax = 60 l / min External coolant supply (AKZ) Submersible centrifugal pump (20l at 2bar) Protective and safety devices Probe Renishaw RMP60
- MS Maschinenhandel GmbH
- Unterdorf 34
- 6532 Ladis
- Österreich
-
+43 547221907
+43 54722190722 -
info@ms-maschinen.at
www.ms-maschinen.at
#2034-147 · Planer-Type Milling M/C - Double Column
WALDRICH-COBURG - 14-10 FP200NC - - 1986 / 2010 retrofit - HEIDENHAIN iTNC 530
Technical details
- Knops Werkzeugmaschinen
- Konrad-Zuse-Straße 5
- 40789 Monheim
- Deutschland
-
02173 - 39494-0
02173 - 39494-29 -
maschinen@knops.de
www.knops.de
#1022-H07837 · Planer-Type Milling M/C - Double Column
WALDRICH-COBURG - 17-10 FP 225 - - 1985/2003 - Siemens 840 D
Technical details
Machine general overhauled and equipped with SIEMENS 840 D control in 2003 - new digital motors, drive controllers, measuring systems and switch cabinet - tool changer for 60 tools (45 ISO 50, 15 ISO 60) - 3 angular milling heads (HSD 175, WFD 800) with service device 4 x 90 deg. indexing - hydrostatic table guideways - adjustable crossrail - 2 tables coupled - chip conveyor - coolant device Machine can be inspected under power, subject to prior notice.
- Kemmerich Werkzeugmaschinen
- Im Rottfeld 1a
- 40789 Monheim am Rhein
- Deutschland
-
+49 2173 207474
+49 2173 207473 -
info@kemmerich.biz
www.kemmerich.biz
#1020-20203 · Planer-Type Milling M/C - Double Column
WALDRICH-COBURG - 20-10 FP - - 1982 - Siemens 840C
Technical details
Portal milling machine equipped with: - CNC control Siemens 840C - tool magazine - Head changing station with X-stations - Coolant system with paper belt filter
Datasheet
Request / Contact
- Kemmerich Werkzeugmaschinen
- Im Rottfeld 1a
- 40789 Monheim am Rhein
- Deutschland
-
+49 2173 207474
+49 2173 207473 -
info@kemmerich.biz
www.kemmerich.biz
#1020-20204 · Planer-Type Milling M/C - Double Column
WALDRICH-COBURG - 20-10 FP 450 NC - - 1981 - Siemens 840C
Technical details
Portal milling machine equipped with: - CNC control Siemens 840C - Head changing station with X-stations - Coolant system
Datasheet
Request / Contact
- Kemmerich Werkzeugmaschinen
- Im Rottfeld 1a
- 40789 Monheim am Rhein
- Deutschland
-
+49 2173 207474
+49 2173 207473 -
info@kemmerich.biz
www.kemmerich.biz
#1020-20205 · Planer-Type Milling M/C - Double Column
WALDRICH-COBURG - 20-10 FP 320 NC - - 1981 - Siemens 840C
Technical details
Portal milling machine equipped with: - CNC control Siemens 840C
Datasheet
Request / Contact
- SK Maschinen-Service GmbH
- Tackweg 4
- 47918 Tönisvorst
- Deutschland
-
02151 79350
02151 793535 -
info@sk-maschinen.de
www.sk-maschinen.de
#1038-20768 · Planer-Type Milling M/C - Double Column
WALDRICH-COBURG - 20-10 FP 280 - - 1973/1999 - SIEMENS 840 C
Technical details
+ electrically renewed including cabinet, cabling and motors and equipped with a SIEMENS 840 C in 1999. + incl. 16 milling heads and misc.tools