Transport system

working length , mm︱Working width , mm︱Working height , mm︱

---

working length 3120 mm︱Working width 2451 mm︱Working height 750 - 1000 mm︱

---

working length 4200 mm︱Working width 2500 mm︱Working height 850 - 1000 mm︱

---

working length 6000 mm︱Working width , mm︱Working height , mm︱

---

working length 3100 mm︱Working width ca. 3400 mm︱Working height 750 - 1000 mm︱

---

Haberkorn return means for Umfälzautomat ************************************************** ********* For frame from 300 mm to 3000 mm for automatic Return consisting of: First cross roller conveyor approx 3100 mm long ------------------------------------------------- built-in conveyor belts for depositing the wing on the cross roller conveyor with about 10 mm stroke Driving speed of about 5-30 m / min. Roller diameter 80 mm Rollers with PVC coating Gear motor with 0.37 KW 2 Synchronized lifting device for cross roller conveyor -------------------------------------------------- ------------------------ built-in rollers with stepless drive about 5-30 m / min. max. 100 mm stroke Roller diameter 80 mm Rollers with PVC coating Synchronous storage of GG 25 hardened gears and rods 2 pneumatic cylinder 80 x 100 mm adjustable stops (top - down ) Synchronization via shafts and bevel gears 3 longitudinal conveyor for transport back ---------------------------------------------- Conveyor belts with polyester coated tread 50 mm wide, made in plastic guides Drive with spur gear motor 0.37 KW , about 5-30 m / min. Wing with more than 3000 mm can use the Be bypassed operator. control -------------- Siemens S 7, 24 VDC optical limit switches E-stop loop Fully installed with 16 A Euro plug 400 V AC, 2.5 KW, 50 Hz Color: --------- RAL 7035 light gray Construction , commissioning and instruction EUR 980,00 (technical details according to manufacturer - without guarantee ! )

working length 2451 mm︱Working width 1670 mm︱Working height 800-1000 mm︱

---

Neue Haberkorn Rückfördereinrichtung nach Vierseitenhobelmaschine ------------------------------------------------------- Förderanlage für Holzlängen von 300 mm-4200 mm Pos.1 Längs-Quer-Länsförderer ca.2451 x 1670 mm - höheneinstellbare Stützböcke (ca.800 mm - 1000 mm) - stufenlos angetriebene Rollenbahn ca.5-25m/min, - Rollendurchm.50mm, 140mm Rollenmantellänge - Übergabe auf Querförderer durch Heben-Senken der Rollenbahn - Querförderer mit 6 Stck. Traversen - Förderbänder 50mm breit, in Kunststoffbahnen geführt - Antrieb ca.5-25m/min, 0,37 KW - ca.1250mm von Anschlag zu Anschlag - Übergabe als Hebesenkeinrichtung - angetriebene PVC beschichtete Stahlrollen, Durchm.50mm, 140mm Mantellänge - Antrieb ca.5-25m/min, 0,37 KW - Rollenabdeckung nach HBG Pos.2 Förderband ca.3000 x 260mm - höheneinstellbare Stützböcke (ca.800 mm - 1000 mm) - angetriebenes Band ca. 5-25 m/min - Bandbreite 260 mm - Antrieb über Getriebemotor - Förderband auf Lenkrollen mit Bremse - Rollenabdeckung nach HBG Steuerung: Siemens LOGO 24 RCo, 24 V DC, optische Endschalter, Not-Aus-Schleife Fertig installiert mit 16A Eurostecker Anschluß: 400 V AC, 2,0 KW, 50 Hz Pneumatik: 6-8 bar, Verbrauch ca.12NL/min Farbe : RAL 7035 hellgrau CE nach EN 292 Teil1, EN 292 Teil 2, EN 294, EN 349, EN 418, EN 602-1EG Maschinenrichtlinie 89/392/EWG , EG Niederspannungsrichtlinie 73/23 /EWG Genannte Preise ab Werk zzgl. Verpackungs- und Transportkosten (Techn. Angaben laut Hersteller ohne Gewähr!)

working length 2500 mm︱Working width 1650 mm︱Working height 850 - 1000 mm︱

---

working length 2451 mm︱Working width 2170 mm︱Working height 800-1000 mm︱

---

Haberkorn return conveyor approx. 2,451 mm x 2,170 mm ---------------------------------------------- base frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable trestles (approx. 800mm - 1000mm) - Conveyor system for wood lengths from 300mm to 4200mm - Conveyor system for wood widths up to 240mm Roller conveyor - infeed - Continuously driven roller conveyor approx. 5 - 25m/min - Drive via gear motor 0.37kW, vertical shaft and PU round belt - Roll diameter 50mm, 240mm roll jacket length with PVC jacket - Transfer to cross conveyor by lifting - lowering the roller conveyor - Roller cover according to HBG cross conveyor - Cross conveyor with 6 traverses - Conveyor belts PVC coated (green) 50mm wide, guided in plastic tracks - Continuously driven cross conveyor approx. 5 - 20m/min - Drive via geared motor 0.37kW - Approximately 1750mm lock to lock Roller conveyor - outlet - Continuously driven roller conveyor approx. 5 - 25m/min - Drive via gear motor 0.37kW, vertical shaft and PU round belt - Roll diameter 50mm, 240mm roll jacket length with PVC jacket - Transfer to cross conveyor by lifting - lowering the roller conveyor - Roller cover according to HBG ---------------------------------------------- Conveyor belt approx. 320mm x 3500mm base frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable trestles (approx. 800mm - 1000mm) - Conveyor belt for wood lengths from 300mm to 4200mm - Conveyor belt for timber widths up to 240mm - Conveyor belt on castors with brake tape - Continuously driven approx. 5 - 25m/min - Drive via geared motor 0.37kW - Tape PVC coated 260mm wide - Stop on both sides approx. 15mm ---------------------------------------------- Steering: - Ready to plug in with its own controller and logic - Siemens PLC, 24VDC - Siemens frequency converter - Optical limit switches and emergency stop loop - Ready installed with 16A Euro plug - Connection: 400V AC, 2kW, 50Hz ---------------------------------------------- Pneumatic: 6-8 bar, consumption approx. 16NL/min Colour: RAL 7035 light grey Basic EC Directive 2006/42/EC in accordance with 2006/95/EG Electrical Equipment (Low Voltage Directive) and 2004/108/EC EMC Directive ---------------------------------------------- Price of the above version ex works: on request! plus packaging and transport costs ---------------------------------------------- (Technical information according to the manufacturer without guarantee!)

working length 2000 mm︱Working width 250 mm︱Working height 970 mm︱

---

Weinig pressure conveying system DEF 25 to the operator in working height for Unicontrol Length 2000 mm Depth 1800 mm Brand width 250 mm Rear roller conveyor not driven 2500 mm Roll width 250 mm (technical details according to manufacturer - without guarantee.)